DOI QR코드

DOI QR Code

Stochastic modelling and lifecycle performance assessment of bond strength of corroded reinforcement in concrete

  • Chen, Hua-Peng (School of Engineering, University of Greenwich) ;
  • Nepal, Jaya (School of Engineering, University of Greenwich)
  • 투고 : 2014.11.22
  • 심사 : 2015.03.02
  • 발행 : 2015.04.25

초록

Life cycle performance of corrosion affected RC structures is an important and challenging issue for effective infrastructure management. The accurate condition assessment of corroded RC structures mainly depends on the effective evaluation of deterioration occurring in the structures. Structural performance deterioration caused by reinforcement corrosion is a complex phenomenon which is generally uncertain and non-decreasing. Therefore, a stochastic modelling such as the gamma process can be an effective tool to consider the temporal uncertainty associated with performance deterioration. This paper presents a time-dependent reliability analysis of corrosion affected RC structures associated bond strength degradation. Initially, an analytical model to evaluate cracking in the concrete cover and the associated loss of bond between the corroded steel and the surrounding cracked concrete is developed. The analytical results of cover surface cracking and bond strength deterioration are examined by experimental data available. Then the verified analytical results are used for the stochastic deterioration modelling, presented here as gamma process. The application of the proposed approach is illustrated with a numerical example. The results from the illustrative example show that the proposed approach is capable of assessing performance of the bond strength of concrete structures affected by reinforcement corrosion during their lifecycle.

키워드

참고문헌

  1. Almusallam, A.A., Al-Ghantani, A.S., Aziz, A.R. and Rasheeduzzafar. (1996), "Effect of reinforcement corrosion on bond strength", Construct. Build. Mater., 10(2), 123-129. https://doi.org/10.1016/0950-0618(95)00077-1
  2. Alonso, C., Andrade, C., Rodriguez, J. and Diez, J.M. (1998), "Factors controlling cracking of concrete affected by reinforcement corrosion", Mater. Struct., 31(7), 435-441. https://doi.org/10.1007/BF02480466
  3. Al-Sulaimani, G.J., Kaleemullah, M., Basanbul, I.A. and Rasheeduzzafar. (1990), "Influence of corrosion and cracking on bond behaviour and strength of reinforced concrete members", ACI Struct. J., 87(2), 220-231.
  4. Auyeung, Y.B., Balaguru, P. and Chung, L. (2000), "Bond behaviour of corroded reinforcement bars", ACI Mater. J., 97(2), 214-220.
  5. Banba, S., Abe, T., Nagaoka, K. and Murakami, Y. (2014), "Evaluation method for bond-splitting behavior of reinforced concrete with corrosion based on confinement stress of concrete against corrosion expansion", J. Adv. Concrete Tech., 12(1), 7-23. https://doi.org/10.3151/jact.12.7
  6. Bhargava, K., Ghosh, A.K., Mori, Y. and Ramanujam, S. (2007a), "Ultimate flexural and shear capacity of concrete beams with corroded reinforcement", Struct. Eng. Mech., 27(3), 347-363. https://doi.org/10.12989/sem.2007.27.3.347
  7. Bhargava, K., Ghosh, A.K., Mori, Y. and Ramanujam, S. (2007b), "Corrosion-induced bond strength degradation in reinforced concrete- analytical and empirical models", Nucl. Eng. Des., 237(11), 1140-1157. https://doi.org/10.1016/j.nucengdes.2007.01.010
  8. Cairns J., Du, Y. and Law, D. (2006), "Residual bond strength of corroded plain round bars", Mag. Concrete Res., 58(4), 221- 231. https://doi.org/10.1680/macr.2006.58.4.221
  9. Cairns, J. and Abdullah, R.B. (1996), "Bond strength of black and epoxy-coated reinforcement-a theoretical approach", ACI Mater. J., 93(4), 362-369.
  10. CEB-FIP (1990), CEB-FIP Model Code 1990, Comite Euro-International du Beton (CEB), Thomas Telford, London, UK.
  11. Chen, H.P. and Alani, A.M. (2012), "Reliability and optimised maintenance for sea defences", Proc. ICE: Marit. Eng. 165(2), 51-64. https://doi.org/10.1680/maen.2010.37
  12. Chen, H.P. and Alani, A.M. (2013), "Optimized maintenance strategy for concrete structures affected by cracking due to reinforcement corrosion", ACI Struct. J., 110(2), 229-238.
  13. Chen, H.P. and Bicanic, N. (2010), "Identification of structural damage in buildings using iterative procedure and regularisation method", Eng.Comput. 27(8), 930-950. https://doi.org/10.1108/02644401011082962
  14. Chen, H.P. and Xiao, N. (2012), "Analytical solutions for corrosion-induced cohesive concrete cracking", J.Appl.Math. Article ID 769132.
  15. Chen, H.P. and Xiao, N. (2015), "Symptom-based reliability analyses and performance assessment of corroded reinforced concrete structures", Struct. Mech. Eng., 53(6), 1183-1200. https://doi.org/10.12989/sem.2015.53.6.1183
  16. Coronelli, D. (2002), "Corrosion cracking and bond strength modelling for corroded bars in reinforced concrete", ACI Struct. J., 99(3), 267-276.
  17. Coronelli, D. and Gambarova, G. (2000), "A mechanical model for bond strength of corroded reinforcement in concrete", Proceedings of the 14th Engineering Mechanics Conference, Austin, Texas.
  18. Coronelli, D., Hanjari, K. and Lundgren, K. (2013), "Severely corroded RC with cover cracking", J. Struct. Eng., ASCE, 139(2), 221-232. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000633
  19. Eurocode 2 (2004), Design of Concrete Structure, European comitee for standardization, Brussels, Belgium.
  20. Fischer, C. (2010), "Experimental investigations on the effect of corrosion on bond of deformed bars", 8th fib PhD Symposium, Kgs, Lyngby, Denmark.
  21. Fan, Y., Hu, Z., Luan, H., Wang, D. and Chen, A. (2014), "A study of deterioration of reinforced concrete beams under various forms of simulated acid rain attack in the laboratory", Struct. Mech. Eng., 52(1), 35-49. https://doi.org/10.12989/sem.2014.52.1.035
  22. Frangopol, D.M., Kong, J.S. and Gharaibeh, E.S. (2001), "Reliability-based life-cycle management of highway bridges", J. Comput. Civil Eng., ASCE, 15(1), 27-34. https://doi.org/10.1061/(ASCE)0887-3801(2001)15:1(27)
  23. Giuriani, E., Plizzari, G. and Schumm, C. (1991), "Role of stirrups and residual tensile strength of cracked concrete on bond", J. Struct. Eng., ASCE, 117(1), 1-18. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(1)
  24. Gu, X., Zhang, W., Shang, D. and Wang, X. (2010), "Flexural behaviour of corroded reinforced concrete beams", Earth and Space 2010, ASCE, 3545-3552.
  25. Hillerborg, A., Modeer, M. and Petersson, P.E. (1976), "Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements", Cement Concrete Res., 6(6), 773-782. https://doi.org/10.1016/0008-8846(76)90007-7
  26. Huang, T.L. and Chen, H.P. (2013), "Symptom-based reliability analysis and remaining service life prediction of deteriorating RC structures", Key Eng. Mater., 569, 151-158.
  27. Khan, I., Francois, R. and Castel, A. (2014), "Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams", Cement Concrete Res., 56, 84-96. https://doi.org/10.1016/j.cemconres.2013.11.006
  28. Law, D.W., Tang, D., Molyneaux, T.K.C. and Gravina, R. (2011), "Impact of crack width on bond: confined and unconfined rebar", Mater. Struct., 44(7), 1287-1296. https://doi.org/10.1617/s11527-010-9700-y
  29. Li, F. and Yuan, Y. (2013), "Effects of corrosion on bond behavior between steel strand and concrete", Construct. Build. Mater., 38, 413-422. https://doi.org/10.1016/j.conbuildmat.2012.08.008
  30. Lundgren, K. (2002), "Modelling the effect of corrosion on bond in reinforced concrete", Mag. Concrete Res., 54(3), 165-173. https://doi.org/10.1680/macr.2002.54.3.165
  31. Nepal, J., Chen, H.P. and Alani, A.M. (2013), "Analytical modelling of bond strength degradation due to reinforcement corrosion", Key Eng. Mater., 569, 1060-1067.
  32. Nepal, J. and Chen, H.P. (2014), "Evaluation of residual strength of corrosion damaged reinforced concrete structures", 4th International Symposium on Life-Cycle Civil Engineering, Tokyo, Japan.
  33. Pantazopoulou, S. and Papoulia, K. (2001), "Modeling cover-cracking due to reinforcement corrosion in RC structures", J. Eng. Mech., ASCE, 127(4), 342-351. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:4(342)
  34. Rodriguez, J., Ortega, L.M. and Casal, J. (1994), "Corrosion of reinforcing bars and service life of reinforced concrete structures: corrosion and bond deterioration", Proceedings of International Conference on Concrete across Borders, Odense, Denmark.
  35. Shetty, A., Venkataramana, K. and Narayan K.S. B. (2014), "Flexural bond strength behaviour in OPC concrete of NBS beam for various corrosion levels", Struct. Mech. Eng., 49(1), 81-93. https://doi.org/10.12989/sem.2014.49.1.081
  36. Tee, K.F., Khan, L.R. and Chen, H.P., (2013), "Probabilistic failure analysis of underground flexible pipes", Struct. Mech. Eng., 47(2), 167-183. https://doi.org/10.12989/sem.2013.47.2.167
  37. Torres-Acosta, A.A., Navarro-Gutierreza, S. and Teran-Guillen J. (2007), "Residual flexure capacity of corroded reinforced concrete beams", Eng. Struct., 29(6), 1145-1152. https://doi.org/10.1016/j.engstruct.2006.07.018
  38. Val, D.V., Stewart, M.G. and Melchers, R.E. (1998), "Effect of reinforcement corrosion on reliability of highway bridges", Eng. Struct., 20(11), 1010-1019. https://doi.org/10.1016/S0141-0296(97)00197-1
  39. Van Noortwijk, J.M. (2009), "A survey of the application of gamma processes in maintenance", Reliab. Eng. Syst. Saf., 94(1), 2-21. https://doi.org/10.1016/j.ress.2007.03.019
  40. Van Noortwijk, J.M. and Frangopol, D.M. (2004), "Two probabilistic life-cycle maintenance models for deteriorating civil infrastructures", Probab. Eng. Mech., 19(4), 345-359. https://doi.org/10.1016/j.probengmech.2004.03.002
  41. Vidal, T., Castel, A. and Francois, R. (2004), "Analyzing crack width to predict corrosion in reinforced concrete", Cement Concrete Res., 34(1), 165-174. https://doi.org/10.1016/S0008-8846(03)00246-1
  42. Wang, X.H. and Liu, X.L. (2004), "Modelling effects of corrosion on cover cracking and bond in reinforced concrete", Mag. Concrete Res., 56(4), 191-199. https://doi.org/10.1680/macr.2004.56.4.191
  43. Xia, J., Jin, W.L. and Li, L.Y. (2012), "Effect of chloride-induced reinforcing steel corrosion on the flexural strength of reinforced concrete beams", Mag. Concrete Res., 64(6), 471-485. https://doi.org/10.1680/macr.10.00169
  44. Zhang, R., Castel, A. and Francois, R. (2010), "Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process", Cement Concrete Res., 40(3), 415-425. https://doi.org/10.1016/j.cemconres.2009.09.026
  45. Zhao, Y., Lin, H., Wu, K. and Jin, W. (2014), "Bond behaviour of normal/recycled concrete and corroded steel bars", Construct. Build. Mater., 48, 348-359.

피인용 문헌

  1. Stochastic modelling and optimum inspection and maintenance strategy for fatigue affected steel bridge members vol.18, pp.3, 2016, https://doi.org/10.12989/sss.2016.18.3.569
  2. Modeling Residual Flexural Strength of Corroded Reinforced Concrete Beams vol.115, pp.6, 2018, https://doi.org/10.14359/51702232
  3. Stochastic modelling fatigue crack evolution and optimum maintenance strategy for composite blades of wind turbines vol.63, pp.6, 2015, https://doi.org/10.12989/sem.2017.63.6.703
  4. Bond deterioration of corroded steel in two different concrete mixes vol.63, pp.6, 2017, https://doi.org/10.12989/sem.2017.63.6.725
  5. Optimal inspection frequency to mitigate the risk of building system failure vol.64, pp.3, 2017, https://doi.org/10.12989/sem.2017.64.3.347
  6. Effect of cover cracking on reliability of corroded reinforced concrete structures vol.20, pp.5, 2015, https://doi.org/10.12989/cac.2017.20.5.511
  7. Flexural Capacity Prediction of Corroded Prestressed Concrete Beams Incorporating Bond Degradation vol.32, pp.4, 2015, https://doi.org/10.1061/(asce)as.1943-5525.0001022
  8. Stochastic damage model for bond stress-slip relationship of reinforcing bar embedded in concrete vol.194, pp.None, 2015, https://doi.org/10.1016/j.engstruct.2019.05.053
  9. Design charts for consolidation settlement of marine clays using finite strain consolidation theory vol.24, pp.3, 2015, https://doi.org/10.12989/gae.2021.24.3.295