• 제목/요약/키워드: gNB

검색결과 308건 처리시간 0.029초

에티오피아 남부 켄티차 페그마타이트의 분화양상과 희유원소 광화작용 (Fractionation and Rare-Element Mineralization of Kenticha Pegmatite, Southern Ethiopia)

  • 김의준;김수영;문동혁;고상모
    • 자원환경지질
    • /
    • 제46권5호
    • /
    • pp.375-390
    • /
    • 2013
  • 켄티차(Kenticha) 희유원소(Ta-Li-Nb-Be) 광화대는 에티오피아 남부의 오피올라이트 습곡-쓰러스트 복합체내에 위치하고 있으며, 1980년대 에티오피아-구소련간 수행된 공동탐사 프로그램을 통해서 처음 발견되었다. 켄티차 희유원소 광화대는 남쪽에서 북쪽으로 덜미다마(Dermidama), 킬킬리(Kilkele), 슈니힐(Shuni Hill), 켄티차, 부포(Bupo) 페그마타이트를 포함한다. 켄티차 페그마타이트는 남북방향의 사문암과 활석-녹니석 편암층을 평행하게 관입하고 있으며, 대략 연장 2 km, 폭 400-700 m로 노출되어 있다. 켄티차 페그마타이트는 내부적으로 대상(zoning)을 이루고 있으며, 광물조합에 따라 하부 석영-백운모-조장석 화강암, 중부 백운모-석영-조장석-미사장석 페그마타이트, 상부 스포듀민-석영-조장석 페그마타이트로 세분된다. 주성분, 미량성분(Rb, Li, Nb, Ta, Ga), 원소비(K/Rb, Nb/Ta, Mg/Li, Al/Ga)는 페그마타이트의 분별작용과 고화작용이 하부에서 상부 페그마타이트로 진행되었음을 시사한다. 반면에 일반적인 페그마타이트 멜트의 분화양상과 달리 켄티차 페그마타이트의 Mg/Li 비는 상부 페그마타이트로 가면서 증가하는 양상을 보인다. 이러한 양상은 후기 마그마성 열수변질 또는 상부 초염기성암과의 반응 결과로 해석된다. 켄티차 페그마타이트의 희유원소 광화작용은 상부 페그마타이트에 집중되며, 최대 $Li_2O$ 3.0%, Rb 3,780 pm, Cs 111 ppm, Ta 1,320 ppm, and Nb 332 ppm을 함유하고 있다. 켄티차 페그마타이트에서 광석광물은 주로 탄탈라이트, 스포듀민, 레피돌라이트가 산출되며, 탄탈라이트는 거정의 석영-스포듀민과 상대적으로 세립의 당상 조장석과 함께 산출된다. 탄탈라이트는 $Mn^*$$Ta^*$ 값에 근거할 때 Mn-탄탈라이트로 분류된다. 거정질과 세립의 탄탈라이트는 조성($Mn^*$, $Ta^*$, Nb/Ta) 차이가 명확히 나타나며, 거정질 탄탈라이트는 세립의 탄탈라이트에 비해 Ta이 강하게 부화되며 Nb은 결핍되어 있다. 결론적으로 켄티차 페그마타이트에서 희유원소 광화작용은 마그마 멜트의 분별작용 최후기에 형성되었다.

Cu-Si 기지금속을 사용한 교류용 초전도선재 제조 및 특성 (Fabrication and characteristics of NbTi superconducting wires with Cu-Si matrix for AC use)

  • 하동우;오상수;오봉환;권영길;조전욱;류강식;한일용;백홍구
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 C
    • /
    • pp.1165-1167
    • /
    • 1995
  • The Cu-Si alloy has been proposed as a new matrix materal for filamentary Nb-Ti wires in AC use. The Cu-Si alloy shows approprite mechanical and electrical properties, and is economically more favourable than the Cu-Ni alloy matrix used currently. Moreover, the addition of Si to Cu prevents the formation of intermetallic compounds around the filaments. After we investigated resistivity and hardness of Cu-Si alloy as matrix materal, investigated CuSi/NbTi interface reactions and superconductivities of superconducting wires that were made by various heat treatment.

  • PDF

$La_2O_3$ 첨가에 따른 (Ka,K)$NbO_3$ 세라믹스의 미세구조 및 압전 특성

  • 서병호;성금현;노정래;이상호;류주현;김인성;송재성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 춘계학술회의 초록집
    • /
    • pp.12-12
    • /
    • 2010
  • The piezoelecric properties of $(K_{0.5}Na_{0.5})(Nb_{0.96}Sb_{0.04})O_3$+$1.2mol%K_4CuNb_8O_{23}$+$xmol%La_2O_3$ lead-free piezoelecric ceramics were investigated as a function x. These ceramics were fabricated by conventional ceramics processing. Piezoelectric constant ($d_{33}$) and piezoelectric charge coefficient ($g_{33}$) of x=0.2 mol% composition exhibited good properties of 160.3pC/N and 37.4($10^{-3}Vm/N$), respectively.

  • PDF

하소온도가 $Ba[Mg_{1/3}(Nb_{0.2}Ta_{0.8})_{2/3}]O_3$ 세라믹스의 물리적 특성에 미치는 영향 (The Effect of Calcination Temperature on Physical Properties of $Ba[Mg_{1/3}(Nb_{0.2}Ta_{0.8})_{2/3}]O_3$ Ceramics)

  • 김재윤;김부근;김강언;정수태;조상희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 추계학술대회 논문집
    • /
    • pp.252-255
    • /
    • 1999
  • The effect of calcination temperature(1st and 2nd calcining at 110$0^{\circ}C$ , 120$0^{\circ}C$ and 130$0^{\circ}C$ respectively) on physical properties of BMNT Ceramics ware investigated. The optimum 1st and 2nd calcination temperature were 120$0^{\circ}C$ , and sintering temperature was 155$0^{\circ}C$. In this condition, the sintering density was 7.53 [g/㎤] and the dielectric constant, Q.f$_{0}$ and $\tau$$_{r}$ were 26, 80, 300[GHz] and +1.5[ppm/$^{\circ}C$] respectively in the microwave range.e.e.

  • PDF

Electron Spin Resonance Investigation of Fe3+ in Crystalline LiNbO3 Under the Polarized External Radiation

  • Park, Jung-Il;Cheong, Hai-Du
    • 한국자기공명학회논문지
    • /
    • 제17권2호
    • /
    • pp.92-97
    • /
    • 2013
  • We study the electron spin resonance line-width (ESRLW) of $Fe^{3+}$ in crystalline $LiNbO_3$ ; the ESRLW is obtained using the projection operator method (POM) developed by Argyres and Sigel. The ESRLW is calculated to be axially symmetric about the c-axis and is analyzed by the spin Hamiltonian with an isotopic g factor at a frequency of 9.5 GHz. The ESRLW increases exponentially as the temperature increases, and the ESRLW is almost constant in the high-temperature region (T>8000 K). This kind of temperature dependence of the ESRLW indicates a motional narrowing of the spectrum when $Fe^{3+}$ ions substitute the $Nb^{5+}$ ions in an off-center position. It is clear from this feature that there are two different regions in the graph of the temperature dependence of the ESRLW.

Synthesis and Characterization of Molecular Composite Prepared from Layered Perovskite Oxide, $HLa_2Ti_2NbO_{10}$

  • 홍영식;김시중
    • Bulletin of the Korean Chemical Society
    • /
    • 제18권6호
    • /
    • pp.623-628
    • /
    • 1997
  • A layered perovskite oxide, $RbLa_2Ti_2NbO_{10}$, was prepared and investigated for proton exchange and intercalation behaviors. Its protonated form, $Hla_2Ti_2NbO_{10}$, exhibits the Bronsted acidity and reacts with organic amines. Polyoxonuclear cation, 4Al_{13}$, was then introduced into the interlayer by refluxing octylamine-intercalated compound with an $Al_{13}$ pillaring solution. These layered oxides were characterized by X-ray diffractometer, thermogravimeter, FT-infrared spectrometer and elemental analyzer. It is observed that the polyoxonuclear cation-pillared material exhibits a bilayer structure and is thermally more stable than organic counterpart at higher temperatures. The surface area of the pillared material annealed at 400 ℃ was the value of 25.1 m²/g.

액체 연료의 분무를 위한 압전 세라믹 진동자의 설계 및 동작 특성 (The Design and Driving Characteristics of Piezoelectric Ceramic Oscillator for Spraying of Liquid Material)

  • 이수호;석정영;류기홍;김한근;김진규;류주현;사공건
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
    • /
    • pp.686-689
    • /
    • 2002
  • The application of the ultrasonic nozzle has been extended because it is possible atomization of liquid material. In this study, the characteristics of the ultrasonic nozzle and ceramic oscillator were investigated. The oscillator for the ultrasonic nozzle were made piezoelectric ceramic of $Pb[(Sb_{1/2}Nb_{1/2})_{0.035}-(Mn_{1/3}Nb_{2/3})_{0.065}-(Zr_{0.49}Ti_{0.51})_{0.90}]O_3$. The electromechanical coupling factor$(k_p)$ and mechanical quality factor$(Q_m)$ showed the values of 0.555, 1,214 respectively when the Zr/Ti ratio was 49/51. Moreover, this oscillator will have the temperature stability because it's curie temperature is $322[^{\circ}C]$. The driving current of ultrasonic nozzle showed the value of 80[mA] when the driving time was 10[min.]. Also, The surface temperature of ceramic oscillator showed $80[^{\circ}C]$ at driving time 10[min.] We knew that the ultrasonic nozzle had stabile driving above 10[min.].

  • PDF

Analysis of the IP Spoofing Attack Exploiting Null Security Algorithms in 5G Networks

  • Park, Tae-Keun;Park, Jong-Geun;Kim, Keewon
    • 한국컴퓨터정보학회논문지
    • /
    • 제27권9호
    • /
    • pp.113-120
    • /
    • 2022
  • 본 논문에서는 5G 네트워크에서 Null 보안 알고리즘 (Null Security Algorithm)을 악용한 IP 스푸핑 공격 (IP Spoofing Attack)의 실현 가능성을 3GPP 표준 규격에 근거하여 분석한다. 3GPP 표준 규격에 따르면, 초기 Registration Request 메시지는 암호화 및 무결성 보호를 받지 못한다. IP 스푸핑 공격은 피해자 UE (User Equipment)의 초기 Registration Request 메시지의 내용을 악의적인 gNB (next generation Node B)가 수정한 뒤 AMF (Access and Mobility Management Function)에게 전송할 수 있다는 취약점을 활용하는 공격이다. 공격이 성공하면, 피해자 UE는 5G 네트워크에서 연결이 끊어지고 악의적인 UE가 인터넷 서비스를 사용하지만 5G 사업자는 피해자 UE에게 요금을 청구한다. 본 논문에서는 IP 스푸핑 공격을 구성하는 각각의 시그널링 메시지가 3GPP Rel-17 표준 규격에서 허용되는 것인지 여부를 분석함으로써 IP 스푸핑 공격의 실현 가능성을 분석한다. 분석 결과, 3GPP Rel-17 표준 규격에 따라 구현된 5G 시스템에서 IP 스푸핑 공격은 실현 불가능한 공격으로 판단된다.

카본슬러리 연료의 분산안정성 개선 및 scale up 제조 연구 (Research on the Dispersion Stability and Scale up of Carbon Slurry Fuel)

  • 조민호;양문규;이익모;조준현;권태수;정병훈;한정식
    • 한국추진공학회지
    • /
    • 제13권3호
    • /
    • pp.34-40
    • /
    • 2009
  • 카본슬러리 연료 제조 시 카본의 분산안정성에 미치는 공정변수의 영향을 조사하였다. 카본슬러리연료의 분산안정성은 위치별 입도분석, 카본함량 분석, 그리고 원심분리 후 분산상태 관찰을 통해서 측정하였다. 여러 종류의 첨가제를 적용한 결과, NB463S84 사용시 분산성과 분산안정성이 가장 우수한 것을 알 수 있었다. NB463S84와 비슷한 작용기를 가지는 PIBSI를 합성하였으며, 이를 카본슬러리 연료에 적용하여 유사한 분산안정도를 얻었다. 끝으로 g 규모에서 얻은 제조 조건을 kg 규모 제조에 적용하여 카본슬러리 연료의 실용화 가능성을 확인하였다.

Evaluation and Identification of Promising Bivoltine Hybrids of Silk-worm, Bombyx mori L., for Tropics

  • Rao, P.Sudhakara;Singh, Ravindra;Kalpana, G.V.;Naik, V.Nishitha;Basavaraja, H.K.;Swamy, G.N.Rama;Datta, R.K.
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제3권1호
    • /
    • pp.31-35
    • /
    • 2001
  • Ten newly evolved bivoltine hybrids of silkworm (Bombyx mori L) were evaluated with control hybrid KA${\pm}$NB4D2 during three seasons of a year for their seasonal performance. Analysis of variance and other statistical methods were employed and the performance was observed in respect of 10 quantitative traits. The results showed significant genotype${\pm}$environment interaction with respect to four quantitative characters viz. fecundity, yield/10,000 larvae, filament length and raw silk (%). Environmental effects were significant for nine characters out of ten characters evaluated. A 105${\pm}$J2 and B${\pm}$NB4D2 were considered as highly adaptable hybrids to local conditions with high mean for maximum characters studied and found suitable to rear in all seasons.

  • PDF