• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.131-135
• /
• 2000

본 논문에서는 고성능 고정 소수점 DSP (Digital Signal Processor) 코어인 Vincent6 코어 [1]를 이용하여 ITU-T C.728 음성 부호화기를 실시간으로 구현하였다 G.728 은 16 kb/s전송률의 ITU-T표준 음성 부호화기이며, 입력신호는 8 kHz로 샘플링되며 샘플 당 16 bit 로 양자화된 PCM 신호이다. G.728 은 LD-CELP(Low Delay Code Excited Linear Prediction)라고도 하며, 알고리 듬 delay는 0.625ms 이다. Vincent6 DSP core 는 VLIW (Very-Long Instruction Word) 특성을 가지므로 다중 명령 (multiple instruction)을 수행할 수 있다 이를 위해서 G.728 annex G를 이용하여 고정 소숫점 연산으로 코드를 작성한 후, 이를 vincent6 어셈블리 코드로 구현하였다. 최종적으로 구현된 코드는 ITU-T 의 test vector 에 대 해 bit exact 한 결과를 보이며 34 MCPS (Million Cycles Per Second)의 계산량을 가지며 사용 메모리크기는 데이터 메모리가 약 9KByte, 프로그램 메모리가 약 57 KByte 이다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.52-55
• /
• 1999

다중 전송율(16, 24, 32, 40kbps)을 제공하는 G.726 부호화기는 ADPCM (Adaptive Differential Pulse Code Modulation) 부호화법을 사용한다. 본논문에서는 G.726 ADPCM 알고리즘을 C&S Technology에서 개발한 음성 신호 처리를 위한 범용 DSP인 CSD17C00A 칩을 이용하여 실시간 응용이 가능하도록 구현하였다. G.726에 대한 양방향 평가는 Codec Loopback test을 통해 수행되었으며, W-T에서 제공한 테스트 절차에 따라 평가되었다. 본 논문에서 구현된 G.726 부호화기는 평균 11 MIPS의 계산 속도를 갖고, 프로그램 메모리 크기는 2.8K Words이고, 데이터 메모리 크기는 550 Words 를 필요로 하였다.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.182-188
• /
• 1999

The optimal joint maximum-likelihood sequence estima-for using an array of antennas is derived for synchronous direct sequence-code division multiple access (DS-CDMA) system. Each user employs a rate 1/n convolutional code for channel coding for the additive white Gaussian noise (AWGN) channel. The array re-ceiver structure is composed of beamformers in the users' direc-tions followed by a bank of matched filters. The decoder is imple-mented using a Viterbi algorithm whose states depend on the num-ber of users and the constraint length of the convolutional code. The asymptotic array multiuser coding gain(AAMCG)is defined to encompass the asymptotic multiuser coding gain and the spatial information on users' locations in the system. We derive the upper and lower bounds of the AAMCG. As an example, the upper and lower bounds of AAMCG are obtained for the two user case where each user employes the maximum free distance convolutional code with rate 1/2. The enar-far resistance property is also investigated considering the number of antenna elements and user separations in the space.

• Journal of computational fluids engineering
• /
• v.19 no.2
• /
• pp.24-29
• /
• 2014

In this study, a parallel performance of CUPID-code has been investigated for both Ethernet and Infiniband network system to examine the effect of cache memory and network-speed. Bi-conjugate gradient solver of CUPID-code has been parallelised by using domain decomposition method and message passing interface (MPI). It is shown that the parallel performance of Ethernet-network system is worse than that of Infiniband-network system due to the slow network-speed and a small cache memory. It is also found that the parallel performance of each system deteriorates for a small problem due to the communication overhead, but the performance of Infiniband-network system is better than Ethernet-network system due to a much faster network-speed. For a large problem, the parallel performance depends less on network system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.83-89
• /
• 2012

Recently, due to widespread use of smartphones, the number of applications of the QR code is increased rapidly. QR codes, a kind of 2-dimensional barcode, is used to encode information such as simple URLs or namecards, especially for corporates' advertisement. Users can get some information easily by taking picture of the target QR code, however, fake or altered QR codes can cause serious problems, e.g., URL hijacking or infringement of private information because no one can identify the buried information in the QR code by his naked eye. In this paper, I summarize threats to the QR code and present how to tackle these threats.

• Advances in aircraft and spacecraft science
• /
• v.6 no.1
• /
• pp.51-67
• /
• 2019

AMOSC (Automatic Margin Of Safety Calculation) is a SW tool which has been developed to calculate the failure index of layered composite structures by referring to the cutting edge state-of-the-art LaRC05 criterion. The stress field is calculated by a finite element code. AMOSC allows the user to calculate the failure index also by referring to the classical Hoffman criterion (which is commonly applied in the aerospace industry). When developing the code, particular care was devoted to the computational efficiency of the code and to the automatic reporting capability. The tool implemented is an API which has been embedded into Femap Siemens SW custom tools. Then, a user friendly graphical interface has been associated to the API. A number of study-cases have been solved to validate the code and they are illustrated through this work. Moreover, for the same structure, the differences in results produced by passing from Hoffman to LaRC05 criterion have been identified and discussed. A number of additional comparisons have thus been produced between the results obtained by applying the above two criteria. Possible future developments could explore the sensitivity of the failure indexes to a more accurate stress field inputs (e.g. by employing finite elements formulated on the basis of higher order/hierarchical kinematic theories).

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.13-30
• /
• 2019

This paper presents the recent improvements in the DeCART code for HTGR analysis. A new 190-group DeCART cross-section library based on ENDF/B-VII.0 was generated using the KAERI library processing system for HTGR. Two methods for the eigen-mode adjoint flux calculation were implemented. An azimuthal angle discretization method based on the Gaussian quadrature was implemented to reduce the error from the azimuthal angle discretization. A two-level parallelization using MPI and OpenMP was adopted for massive parallel computations. A quadratic depletion solver was implemented to reduce the error involved in the Gd depletion. A module to generate equivalent group constants was implemented for the nodal codes. The capabilities of the DeCART code were improved for geometry handling including an approximate treatment of a cylindrical outer boundary, an explicit border model, the R-G-B checker-board model, and a super-cell model for a hexagonal geometry. The newly improved and implemented functionalities were verified against various numerical benchmarks such as OECD/MHTGR-350 benchmark phase III problems, two-dimensional high temperature gas cooled reactor benchmark problems derived from the MHTGR-350 reference design, and numerical benchmark problems based on the compact nuclear power source experiment by comparing the DeCART solutions with the Monte-Carlo reference solutions obtained using the McCARD code.

• International journal of steel structures
• /
• v.18 no.4
• /
• pp.1397-1409
• /
• 2018

Stiffened plates with high slenderness parameters show large out-of-plane deflections, due to elastic buckling, which may occur before the plates reach their ultimate strength. From a serviceability point of view, restriction of out-of-plane deflections exceeding the fabrication tolerance is of primary importance. Compressive strength at the serviceability limit state (SLS) for slender stiffened plates under uniaxial stress was investigated through nonlinear elasto-plastic finite element analysis, considering both geometric and material nonlinearity. Both normal and high-performance steel were considered in the study. The SLS was defined based on a deflection limit and an elastic buckling strength. Probabilistic distributions of the SLS strengths were obtained through Monte Carlo simulations, in association with the response surface method. On the basis of the obtained statistical distributions, partial safety factors were proposed for SLS. Comparisons with the ultimate strength of different design codes e.g. Japanese Code, AASHTO, and Canadian Code indicate that AASHTO and Canadian Code provide significantly conservative design, while Japanese Code matches well with a 5% non-exceedance probability for compressive strength at SLS.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4460-4473
• /
• 2022

The behaviour of the fission gas plays an important role in the fuel rod performance. In a previous work, we presented a physics-based model describing intra- and inter-granular behaviour of radioactive fission gas. The model was implemented in SCIANTIX, a mesoscale module for fission gas behaviour, and assessed against the CONTACT 1 irradiation experiment. In this work, we present the multi-scale coupling between the TRANSURANUS fuel performance code and SCIANTIX, used as mechanistic module for stable and radioactive fission gas behaviour. We exploit the coupled code version to reproduce two integral irradiation experiments involving standard fuel rod segments in steady-state operation (CONTACT 1) and during successive power transients (HATAC C2). The simulation results demonstrate the predictive capabilities of the code coupling and contribute to the integral validation of the models implemented in SCIANTIX.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.85-93
• /
• 2013

In order to make a more reasonable evaluation on the stiffness of the high-strength mortar-filled sleeve bar splices under cyclic loading, we investigated and analyzed the existing experiment data of 106 full-sized reinforcing bar splices with test variables such as compressive strength of mortar, development length of reinforcement and sleeve type, etc. The following were found: 1) If mortar and the reinforcement development length with $f_{g^*}$(L/d) of more than 340 is used, the cast iron sleeve bar splices for SD350 and SD400 will have the stiffness of higher than A class of the AIJ code. 2) If mortar and the reinforcement development length with $f_{g^*}$(L/d) of more than 400 is used, the cast iron sleeve splices and pipe sleeve splices for SD500 will have the stiffness of higher than A class of the AIJ code.