• Journal of Korean Society for Quality Management
• /
• v.50 no.4
• /
• pp.647-664
• /
• 2022

Purpose: The purpose of this study is to derive major policies that domestic small and medium-sized manufacturing companies should consider to maximize productivity and quality improvement by utilizing manufacturing data and AI, and to find priorities and implications. Methods: In this study, domestic and international issues and literature review by country were conducted to derive major considerations such as manufacturing AI technology, manufacturing AI talent, manufacturing AI data and manufacturing AI ecosystem. Additionally, the questionnaire survey targeting 46 experts of manufacturing data and AI industry were conducted. Finally, the major considerations and detailed factors importance were derived by applying the Analytic Hierarchy Process (AHP). Results: As a result of the study, it was found that 'manufacturing AI technology', 'manufacturing AI talent', 'manufacturing AI data', and 'manufacturing AI ecosystem' exist as key considerations for domestic manufacturing AI. After empirical analysis, the importance of the four key considerations was found to be 'manufacturing AI ecosystem (0.272)', 'manufacturing AI data (0.265)', 'manufacturing AI technology (0.233)', and 'manufacturing AI talent (0.230)'. The importance of the derived four viewpoints is maintained at a similar level. In addition, looking at the detailed variables with the highest importance for each of the four perspectives, 'Best Practice', 'manufacturing data quality management regime, 'manufacturing data collection infrastructure', and 'manufacturing AI manpower level of solution providers' were found. Conclusion: For the sustainable growth of the domestic manufacturing AI ecosystem, it should be possible to develop and promote manufacturing AI policies in a balanced way by considering all four derived viewpoints. This paper is expected to be used as an effective guideline when developing policies for upgrading manufacturing through domestic manufacturing data and AI in the future.

• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.332-335
• /
• 2017

The national competency standards (NCS) is the national standard for standardizing the skills needed to successfully carry out the duties of industrial sites. It consists of competency units and their sub units. Two standards were developed for the manufacturing of Korean rubber products: rubber compounding and rubber product manufacturing. Each standard consists of ten competency units and their elements. Learning modules will be developed in the near future. It is expected that researchers and workers in the Korean rubber industry will utilize these standards.

• International Journal of Advanced Culture Technology
• /
• v.1 no.1
• /
• pp.19-22
• /
• 2013

The basic principle of the product manufacturing technology using the 3D printing technique materializes the material including the high molecular substance or plastic and metallic dust, and etc. the product into the laminate additive manufacturing according to the design diagram gradually. It is applied to the various industrial field including the field of food division, field of home appliances, field of medicine, field of mechanical department and construction, etc.. The global development case of 3D printing technique is the next. This study described global technology and market trends. Afterward, 3D printing technique manages the important role when it exceeds the product manufacturing view just and is grafted with the various technology including the biotechnology, nanotechnology, and etc. and it improves the quality of the human life.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.2
• /
• pp.5-15
• /
• 2004

A telecooperation system supports synchronous cooperation among all the product development partners and enables compensation of deficits concerning traditional information/communication technologies. By analyzing the product development processes and communication scenarios of a company manufacturing automobile parts, the specifications for the suitable telecooperation system were defined. An integrated telecooperation platform that combines the commercial softwares with the new developed modules for customer-oriented functionalities was created as a product development guideline. Future work is strongly required in order to define the best way to improve the integrated platform, based on the functionality of ERP and PDM systems.

• Journal of Korea Technology Innovation Society
• /
• v.6 no.4
• /
• pp.429-446
• /
• 2003

The status of microfactory or microfactory-related research in some advanced countries are investigated. Under the financial support of government, Japan has accomplished the Microfactory Project, the United States has pursued the Micro/Meso mMf project, and European countries have been studying micro assembly systems. In Korea, several universities and some large manufacturers have participated in the development of micro-components or micrcrdevices based on MEMS technology since the late 1990's. Microfactory is a process which achieves an integrated micro-manufacturing system in a production system, which is followed by the steps of micro-technology of machine parts based on micro-system technology. In addition, this process is a new concept of manufacturing system that renovates the existing manufacturing system It is sure that the research of micro- manufacturing technology must lead to nano-technology in the near future, with intensive financial supports of government for this technology.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.345-346
• /
• 2006

In the future, a machine will be more improved in the form of advanced concept with collaborative ability in M2M(Machine to Machine, Mobile to Machine) environment for u-Manufacturing system. This paper tried to standardize M2M and design advanced concept machine. The M2M is front-end system for implementing autonomous ubiquitous environment. The advanced machine in M2M will be a collaborative machine with knowledge-evolutionary ability such as u-Machine(Ubiquitous machine), Vortal(Vertical Portal) machine and P2P(Peer to Peer) machine. Such advanced concept machines will be the key subject for M2M cooperation.

• Journal of Information Technology Applications and Management
• /
• v.24 no.4
• /
• pp.133-152
• /
• 2017

Smart factory has been regarded as a big opportunity for manufacturing industries. However, little literature has been studied for the current status of Korean smart factory. Our paper tries to find gaps between research and real world by summarizing the recent literature and cases in Korean context. As the present level of smart factory introductions in Korean small manufacturing firms is lower than what a variety of literature says, our study points out that more efforts, investments and government support are required to catch up with the knowhow and technologies of developed countries although real-time control, enhanced productivity have been obtained. In future research, we will continue the smart factory study with the accumulated real data.

• Journal of Korean Institute of Industrial Engineers
• /
• v.13 no.2
• /
• pp.117-128
• /
• 1987

A major problem in the adoption of advanced manufacturing systems such as F.M.S. (Flexible Manufacturing Systems) is the prerequisite economic justification process because of high investment needed for the acquisition and installation of F.M.S. While some of the benefits expected are readily quantifiable, others are very difficult or even impossible, using conventional method. Thus the investment in F.M.S. should be considered as a strategic decision rather than a tactical decision which concerns with only financial implications. In this paper we review papers on major justification techniques developed during thelast decade and identify the benefits of F.M.S. and describe the considerations in the justification of F.M.S. Also, we deal with the current and future research directions in justifying F.M.S.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.111-116
• /
• 2018

Recently, shape manufacturing method has been changed to a 3D printer. Since lamination type manufacturing method is the basis for forming a three-dimensional shape by repeated lamination, the horizontal accuracy of the lamination layer is very important. In the current paper, we have proposed a new leveling system to be installed in a large 3D printer. The light source was reflected from the water surface contained in the measuring device, and the inclination of the measuring device was measured from the light that entered into four regions of a quarter photodetector. The electrical signals generated differently according to the position of the beam spot incident on the quarter photodetector was acquired and compensated to be horizontal by using a motor mounted at the corner. Compared to a digital leveler, the newly developed leveling system gave errors of only 2 to 3%. This new device can be applied to various fields including the 3D printer in future.

• The Journal of the Korean dental association
• /
• v.57 no.9
• /
• pp.534-543
• /
• 2019

Digital technology has changed various aspects of the clinical dentistry. The intraoral scanner and Computer-aided design / Computer-aided manufacturing (CAD-CAM) technology are widely used in fabricating fixed prostheses and in implant surgery. These technologies greatly improved the efficiency of clinical and laboratory procedures. With all newly introduced software, devices, and clinical studies, digital technology has been actively applied in removable prostheses. It is now possible to fabricate the removable prostheses more quickly and easily through subtractive and additive manufacturing. Various clinical and laboratory protocols were introduced by many manufacturers. The purpose of this review is to summarize the literature on digital technology for fabricating complete denture with current status and future perspectives.