• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2003년도 제27회 추계학술대회
• /
• pp.72-72
• /
• 2003

Purpose: To prove feasibility of proton chemical shift imaging (lH CSI) during stereotactic procedure, authors performed IH CSI in combination with a stereotactic headframe and selected targets according to local metabolic information, evaluated the pathologic results. Methods: The 1H CSI directed stereotactic biopsy was performed in five patients. 1H CSI was performed before conventional stereotactic MRI with gadolinium enhancement for stereotactic coordinates. The metabolite images expressed as integral ratios, Cho/Cr and Lac/Cr, were displayed in different colors. The stereotactic target coordinates were correlated with the coordinates from the 1H CSI images. Results: The final pathologic results obtained were concordant with the local metabolic information from 1H CSI. We believe that 1H CSI-directed stereotatic biopsy has the potential to significantly improve the accuracy of stereotactic biopsy targeting. Conclusions : Metabolic signals derived from 1H CSI could give us more direct clues for stereotactic target selection during the subsequent conventional stereotactic MR imaging. 1H CSI was feasible with the stereotatic headframe in place. The final pathologic results obtained were concordant with the local metabolic information from 1H CSI. Acknowledgement: This study was supported by a grant of the Center for Functional and Metabolic Imaging Technology, Ministry of Health & Welfare, Republic of Korea (02-PJ3-PG6-EV07-0002).

• 전기학회논문지
• /
• 제63권7호
• /
• pp.976-986
• /
• 2014

In this paper, the problem of reliable control of linear systems with time-varying delays, randomly occurring disturbances, and actuator failures is investigated. It is assumed that actuator failures occur when disturbances affect to the systems. Firstly, by using a suitable Lyapunov-Krasovskii functional and some recent techniques such as Wirtinger-based integral inequality and reciprocally convex approach, stabilization criterion for nominal systems with time-varying delays is derived. Secondly, the proposed method is extended to the reliable $H_{\infty}$ controller design for linear dynamic systems with time-varying delays, randomly occurring disturbances, and actuator failures. Since nonlinear matrix inequalities (NLMIs) are involved in proposed results, the cone complementarity algorithm will be introduced. Finally, two numerical examples are included to show the effectiveness of the proposed criteria.

• Journal of Power Electronics
• /
• 제8권1호
• /
• pp.10-22
• /
• 2008

The wind-driven doubly fed induction generator (DFIG) is currently under pressure to be more grid-compatible. The main concern is the fault ride-through (FRT) requirement to keep the generator connected to the grid during faults. In response to this, the paper introduces a novel model and new control scheme for the DFIG. The model provides a means of direct stator power control and considers the stator transients. On the basis of the derived model, a robust linear quadratic (LQ) controller is synthesized. The control law has proportional and integral actions and takes account of one sample delay in the input owing to the microprocessor's execution time. Further, the influence of the grid voltage imperfection is mitigated using frequency shaped cost functional method. Compensation of the rotor current pulsations is proposed to improve the FRT capability as well as the generator performance under grid voltage unbalance. As a consequence, the control system can achieve i) fast direct power control without instability risk, ii) alleviation of the problems associated with the DFIG operation under unbalanced grid voltage, and iii) high probability of successful grid FRT. The effectiveness of the proposed solution is confirmed through simulation studies on 2MW DFIG.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1320-1327
• /
• 2004

An efficient boundary-based technique is developed for addressing shape design sensitivity analysis in supercavitating flow problem. An analytical sensitivity formula in the form of a boundary integral is derived based on the continuum formulation for a general functional defined in potential flow problems. The formula, which is expressed in terms of the boundary solutions and shape variation vectors, can be conveniently used for gradient computation in a variety of shape design in potential flow problems. While the sensitivity can be calculated independent of the analysis means, such as the finite element method (FEM) or the boundary element method (BEM), the FEM is used for the analysis in this study because of its popularity and easy-to-use features. The advantage of using a boundary-based method is that the shape variation vectors are needed only on the boundary, not over the whole domain. The boundary shape variation vectors are conveniently computed by using finite perturbations of the shape geometry instead of complex analytical differentiation of the geometry functions. The supercavitating flow problem is chosen to illustrate the efficiency of the proposed methodology. Implementation issues for the sensitivity analysis and optimization procedure are also addressed in this flow problem.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.601-613
• /
• 2017

An adjoint-based error estimation and mesh adaptation study is conducted for two-dimensional viscous flows on unstructured hybrid meshes. The error in an integral output functional of interest is estimated by a dot product of the residual vector and adjoint variable vector. Regions for the mesh to be adapted are selected based on the amount of local error at each nodal point. Triangular cells in the adaptive regions are refined by regular refinement, and quadrangular cells near viscous walls are bisected accordingly. The present procedure is applied to single-element airfoils such as the RAE2822 at a transonic regime and a diamond-shaped airfoil at a supersonic regime. Then the 30P30N multi-element airfoil at a low subsonic regime with a high incidence angle (${\alpha}=21deg.$) is analyzed. The same level of prediction accuracy for lift and drag is achieved with much less mesh points than the uniform mesh refinement approach. The detailed procedure of the adjoint-based mesh refinement for the multi-element airfoil case show that the basic flow features around the airfoil should be resolved so that the adjoint method can accurately estimate an output error.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.355-362
• /
• 2004

An efficient boundary-based technique is developed for addressing shape design sensitivity analysis in various problems. An analytical sensitivity formula in the form of a boundary integral is derived based on the continuum formulation for a general functional defined in problems. The formula, which is expressed in terms of the boundary solutions and shape variation vectors, can be conveniently used for gradient computation in a variety of shape design problems. While the sensitivity can be calculated independent of the analysis means, such as the finite element method (FEM) or the boundary element method (BEM), the FEM is used for the analysis in this study because of its popularity and easy-to-use features. The advantage of using a boundary-based method is that the shape variation vectors are needed only on the boundary, not over the whole domain. The boundary shape variation vectors are conveniently computed by using finite perturbations of the shape geometry instead of complex analytical differentiation of the geometry functions. The supercavitating flow problem and fillet problem are chosen to illustrate the efficiency of the proposed methodology. Implementation issues for the sensitivity analysis and optimization procedure are also addressed in these problems.

• 말소리와 음성과학
• /
• 제5권3호
• /
• pp.83-93
• /
• 2013

Vocal hygiene education is an indirect training approach to improve vocal function by educating all facets of optimal vocal health. Satisfaction levels of participants might be an important component of this indirect therapy for voice disorders. The authors aimed to investigate the satisfaction levels of vocal hygiene education in 51 patients with voice problems. We classified voice disorders of the participants according to three etiological categories (subgroups): organic, neurogenic, and functional. The survey consisted of three parts: 1) a condition of vocal hygiene education, 2) a degree of satisfaction of the present education, and 3) a request for future education. Participants responded to each item of the survey using a five-point Likert scale of 1 to 5 (1 being not at all and 5 being extremely). They also wrote down personal comments of improvement. Participants scored the vocal hygiene education offered by the speech-language pathologists between '3' and '4'. Specifically, the participants were highly satisfied with the specific and comprehensible explanation/instruction given by their speech-language pathologists. However, they were less satisfied with the tuition fee for the therapy sessions. Vocal hygiene education is offered individually to people in a clinical setting. Our results support the notion that vocal hygiene education can be an integral aspect of the treatment of voice problems in most cases.

• Advances in concrete construction
• /
• 제9권6호
• /
• pp.569-576
• /
• 2020

Employment of the wave propagation approach with the combination of Pasternak foundation equation gives birth to the shell frequency equation. Mathematically, the integral form of the Lagrange energy functional is converted into a set of three partial differential equations. A cylindrical shell is placed on the elastic foundation of Pasternak. For isotropic materials, the physical properties are same everywhere, whereas the laminated and functionally graded materials, they vary from point to point. Here the shell material has been taken as functionally graded material. The influence of the elastic foundation, wave number, length and height-to-radius ratios is investigated with different boundary conditions. The frequencies of length-to-radius and height-to-radius ratio are counter part of each other. The frequency first increases and gain maximum value in the midway of the shell length and then lowers down for the variations of wave number. It is found that due to inducting the elastic foundation of Pasternak, the frequencies increases. It is also exhibited that the effect of frequencies is investigated by varying the surfaces with stainless steel and nickel as a constituent material. MATLAB software is utilized for the vibration of functionally graded cylindrical shell with elastic foundation of Pasternak and the results are verified with the open literature.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.29-34
• /
• 2008

The efforts of reflecting the system's uncertainties in design step have been made and robust optimization or reliability-based design optimization are examples of the most famous methodologies. In their formulation, the mean and standard deviation of a performance function and constraints expressed by probability conditions are involved. Therefore, it is essential to effectively and accurately calculate them and, in addition, the sensitivity results are required to obtain when the nonlinear programming is utilized during optimization process. We aim to obtain the new and efficient sensitivity formulation, which is based on integral form, on statistical moments such as the mean and standard deviation, and probability constraints. It does not require the additional functional calculation when statistical moments and failure or satisfaction probabilities are already obtained at a design point. Moreover, some numerical examples have been calculated and compared with the exact solution or the results of Monte Carlo Simulation method. The results seem to be very satisfactory.

• 한국도서관정보학회지
• /
• 제28권
• /
• pp.61-91
• /
• 1998

In contemporary education, a school library is considered and valued as a vital and integral component of a school's instructional program. Especially, school library materials should contribute to execution of school curriculums through wide provision of resources. The results of the study are as follows. 1. The term 'library materials' should be changed into 'library resources' with a broad meaning. And, the scope of school library materials should include printed materials, audio-visual materials, electronic materials, associated equipment and other library resources. 2. It is desirable that the minimal standards of total collection is 5 books and 3 AV for a student in elementary schools, 7 books and 5 AV for a student in middle schools, 10 books and 7 AV for a student in high schools. 3. Annual growth is 0.5 for a student in elementary schools, 1 for a student in middle schools and 1.5 copy for a student in high schools. And, the number of minimal serials is 20 titles in elementary schools, 30 titles in middle schools and 50 tides in high schools. 4. Besides, basic collection, with the advances of technology, the school library collection should include new formats and delivery systems such as CD, video discs, videotex, computer software, satellite transmission etc. 5. The recommendable annual ratio of withdrawl is 3 to 5% for update and functional materials.