• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1665-1669
• /
• 2014

Four multialkoxy-functionalized siloxane base-polymers (BP-1~4) were synthesized through either hydrosilylation or condensation reactions in order to prepare multi-networked siloxane polymers having appropriate physical properties for protective coating in fabrications of electronics. Formulations of 4 base-polymers gave coating materials A and B. Product A showed well-controlled flowing and leveling properties, and product A-2 was successfully applied to protective insulating coating for junction areas of connectors and chips in PDP controller. Tack free time, extrusion rate, dielectric breakdown voltage, hardness, thermal stability, water resistance and flame resistance of products A and B were examined.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권6호
• /
• pp.29-36
• /
• 2015

본 연구에서는 유황을 폴리머화하여 콘크리트 표면보호재로 활용가능성을 검토하기 위하여 내구성능 및 생물독성 평가를 실시하였다. 평가 결과, 콘크리트 표면보호재의 내화학성능은 산, 알칼리 용액에 대하여 화학저항성이 우수한 것으로 나타났다. 배합조건별 촉진내후성 실험 후 부착강도평가 결과 규사분말 및 플라이애시를 동시에 혼합한 배합에서 가장 우수한 강도특성을 나타내었다. 콘크리트용 표면보호재 시험체의 온냉반복 후에도 모든 배합조건에서 부착강도 1 MPa을 상회하였고, SFS배합에서 가장 높은 부착강도를 나타내었다. 표면보호재를 도포한 콘크리트의 촉진탄산화 및 염소이온침투저항성을 검토한 결과, 규사분말을 채움재로 사용한 표면보호재를 도포한 시험체에서 가장 우수한 내구성능을 나타내었다. 유황폴리머를 콘크리트 표면보호재로 사용시 생물독성 검토를 위해 어독성 실험을 수행한 결과, 유황폴리머는 생물에 미치는 영향은 없는 것으로 나타났다. 표면보호재의 내화학성, 동결융해저항성, 탄산화, 염소이온침투저항성 등을 모두 고려하여 볼 때, 본 연구범위에서는 유황폴리머에 채움재로서 규사분말과 플라이애시를 각각 20%씩 대체하는 것이 적절한 수준인 것으로 판단된다.

• 대한한방내과학회지
• /
• 제42권6호
• /
• pp.1199-1210
• /
• 2021

Objectives: The aim of this study was to analyze the correlation between patterns determined by pattern identification of functional dyspepsia (FD) and tongue features, including tongue coating and tooth marks, in FD patients. Methods: We reviewed the clinical records of 68 FD patients who visited the Department of Digestive Diseases of Kyung Hee University Korean Medicine Hospital from September 1, 2020 to August 31, 2021. The subjects were evaluated with a computerized tongue image acquisition system (CTIS) and by pattern identification of FD. Measurement included the percentage of tongue coating, tooth mark levels, and pattern scores. Results: Statistically significant negative correlations were noted between the scores of the pattern of 'spleen and stomach deficiency and cold' (SSDC) and the percentage of tongue coating in whole, center, and root of the tongue body. However, no other patterns were correlated with any parameter measured by CTIS. No significant difference was noted in the percentage of tongue coating and the tooth mark level between the patterns. Conclusions: This study demonstrated that the pattern of SSDC was significantly associated with the percentage of tongue coating. We suggest that the percentage of tongue coating could be a useful indicator for identifying the degree of patterning of SSDC in patients with FD.

• 월간포장계
• /
• 통권204호
• /
• pp.112-120
• /
• 2010

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2006년도 춘계학술발표회 초록집
• /
• pp.54-54
• /
• 2006

• 한국표면공학회지
• /
• 제52권2호
• /
• pp.84-89
• /
• 2019

We fabricated durable anti-reflective(AR) layer with silica globular coating on polymer by two steps. Firstly, nano-protrusions of polymer were formed by plasma etching known as R.I.E(reactive ion etching) process. Secondly, silica globular coating was deposited on polymer nano-protrusions for mechanically protective and optically enhancing AR layers by RF magnetron sputter. And then durable antireflective polymers were synthesized adjusting plasma power and time, working pressures of RIE and RF sputtering processes. Consequently, we acquired the average transmission (94.10%) in the visible spectral range 400-800 nm and the durability of AR layer was verified to sustain its transmission until 5,000 numbers by rubber test at a load of 500 gf.

• 대한금속재료학회지
• /
• 제46권5호
• /
• pp.321-327
• /
• 2008

Cu based amorphous ($Cu_{54}Zr_{22}Ti_{18}Ni_6$) coating was produced by cold spraying as a new fabrication process. The microstructure and macroscopic properties of amorphous coating layer was investigated and compared with those of cold sprayed pure Cu coating. Amorphous powders were prepared by gas atomization and Al 6061 was used as the substrate plate. X-ray diffraction results showed that Cu based amorphous powder could be successfully deposited by cold spraying without any crystallization. The Cu based amorphous coating layer ($300{\sim}400{\mu}m$ thickness) contained 4.87% porosity. The hardness of Cu based amorphous coating represented $412.8H_v$, which was correspond to 68% of the hardness of injection casted bulk amorphous material. The wear resistance of Cu based amorphous coating was found to be three times higher than that of pure Cu coating. The 3-point bending test results showed that the adhesion strength of Cu based amorphous coating layer was higher than that pure Cu coating. It was also observed that hard Cu base amorphous particle could easily deform soft substrate by particle collisions and thus generated strong adhesion between coating and substrate. However, the amorphous coating layer unexpectedly represented lower corrosion resistance than pure Cu coating, which might be resulted from the higher content of porosity in the cold sprayed amorphous coating.

• 생명과학회지
• /
• 제23권7호
• /
• pp.879-885
• /
• 2013

유아용 파우더는 유아의 기저귀 발진을 방지하거나 기타 다른 화장용 파우더의 원료로 사용되고 있고 그 주성분은 일반적으로 광물질인 탈크 분말이 주로 이용되고 있다. 탈크 분말은 사용에 있어 호흡기로 흡입하게 되면 심각한 폐 손상 등을 야기하여 위험하다고 알려져 있다. 쌀 분말을 이용한 유아용 파우더를 개발하기 위하여 3종류의 쌀 품종이 사용되었고, 곱게 분쇄하였다. 최적의 유아용 파우더를 얻기 위해 몇 단계의 분쇄과정을 거쳤고, 파우더에 대한 오일과 실리콘 코팅 처리 전후의 파우더 입자크기, 생리활성, 색차, 수분 흡수율 등의 파우더 특성을 검정하였다. 분말의 색택과 입자 크기 등의 특성에서 고아미 품종의 파우더가 우수한 특성을 보였고, 전자현미경 관찰결과 오일과 실리콘 오일 코팅한 쌀 파우더가 탈크에 비해 둥글고 부드러운 모양을 나타내었다. 또한 오일과 실리콘 코팅에 의해 평균 입자크기가 줄어드는 현상을 나타내었으며 쌀 분말의 단점인 수분흡수를 차단하여 파우더로서 우수한 특성을 유지함을 보였다.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.182-186
• /
• 2015

We investigated that effects of annealing ambient on the characteristics of functional nano thin film synthesized on glass substrate. The functional nano thin films were annealed by using rapid thermal annealing (RTA) equipment in vacuum, oxygen and nitrogen ambient, respectively. The hardness of the functional nano thin films were measured by a standard hardness testing method (ASTM D3363) such as a H-9H, F, HB and B-6B pencil (Mitsubishi, Japan). Also, the adhesion of the functional nano thin films were measured by a standard adhesion testing method (ASTM D3359) using scotch tape (3M, Korea). The contact angle of the functional nano thin films was measured by a contact angle analyzer (Phoenix 300 Touch, S.E.O.). The optical property of functional nano thin films was measured via UV-visible spectroscopy (S-3100, Scinco).

• Corrosion Science and Technology
• /
• 제14권2호
• /
• pp.64-75
• /
• 2015

Single $TiO_2$ coating prepared by sol-gel process usually experiences cracks in coating layer. In order to prevent cracks, an inorganic-organic hybrid $TiO_2-SiO_2$ coating was synthesized by combining precursors with an organic functional group. Five different coatings with various ratios of (1:8, 1:4, 1:1, 1:0.25 and 1:0.125) titanium alkoxide (TBOT, Tetrabutylorthotitanate) to organo-alkoxysilane (MAPTS, ${\gamma}$-Methacryloxy propyltrimethoxysilane) on carbon steel substrate were made by sol-gel dip coating. The prepared coatings were analyzed to study the coating properties (surface crack, thickness, composition) by scanning electron microscope (SEM), focused ion beam (FIB), and Fourier transform infrared spectroscopy (FT-IR). Potentiodynamic polarization tests and electrochemical impedance spectroscopy (EIS) were also performed to evaluate the corrosion characteristics of the coatings. Crack free $TiO_2-SiO_2$ hybrid coatings were prepared with the optimization of the ratio of TBOT to MAPTS. The corrosion rates were significantly decreased in the coatings for the optimized precursor ratio without cracks.