Mutant rice cv. Goami2 (G2) and Baegjinjoo (BJJ) derived from a high-quality japonica rice cv. Ilpumbyeo (IP) were extruded under different feed moisture (20 and 30%) and barrel temperature (90, 110, and $130^{\circ}C$). Increasing feed moisture at fixed barrel temperature increased extrudate density (ED) in IP and BJJ. Whereas, G2 showed a varied ED depending on extrusion conditions; increasing barrel temperature decreased the ED of G2 extrudate with low feed moisture, but increased with high moisture. Results indicated a positive barrcl temperature effect on volume expansion in IP and G2, but a negative effect on 811, probably due to shrinkage of expanded products containing low-amylose contents. A significant increase of water absorption was found in G2 and BJJ extruded flour, while an increase of water solubility in those from IP. Non-digestible carbohydrates measured by total dietary fiber (TDF) indicated that extrusion increased slightly TDF in IP and BJJ extrudates, but decreased in G2 products, which might be variety-dependent.
한국작물학회 2017년도 9th Asian Crop Science Association conference
/
pp.245-245
/
2017
Heavy metal pollution of agricultural soils affects land productivity and has impact on the quality of surrounding ecosystem. Soil microbial community parameters are used as reliable indices for assessing quality of agricultural lands under metal stress. This study investigated bacterial community structure of polluted and undisturbed paddy soils to elucidate soil factors that are related to alteration of bacterial communities under conditions of metal pollution. No obvious differences in the richness or diversity of bacterial communities were observed between samples from polluted and control areas. The bacterial communities of three locations were distinct from one another, and each location possessed distinctive set of bacterial phylotypes. The abundances of several phyla and genera differed significantly between study locations. Variation of bacterial community was mostly related to soil general properties at phylum level while at finer taxonomic levels concentrations of arsenic and lead were significant factors. According to results of bacterial community functional prediction, the soil bacterial communities of metal polluted locations were characterized by more abundant DNA replication and repair, translation, transcription and nucleotide metabolism pathway enzymes while amino acid and lipid metabolism as well as xenobiotic biodegradation potential was reduced.Our results suggest that the soil microbial communities had adapted to the elevated metal concentrations in the polluted soils as evidenced by changes in relative abundances of particular groups of microorganisms at different taxonomic resolution levels, and by altered functional potential of the microbial communities.
Rice bran proteins from different cultivars(Youngan, Sindongjin, Suwon 511) were extracted with Xylanase using orthogonal analysis method and their functional properties were investigated. The optimum extraction conditions, based on protein content in the extract found to be at 1 wt% xylanase, pH 7 and 50:1, solvent to rice bran ratio(v/w %). Nitrogen solubility indices(NSI) of rice bran protein concentrates were shown a minimum value at pH 4 ranged 2~23%, varied with different cultivars and a maximum (NSI${\geq}$90% for all cultivars) at pH 10. As for water adsorption and fat adsorption capacity, rice bran protein concentrates were shown to be better than Na-caseinate and isolated soy protein, respectively. Emulsifying activities were observed high in order of Na-caseinate>Youngan rice bran protein>Shindongjin rice bran protein>Suwon 511 rice bran protein>isolated soy protein. In general, the surface tension of rice bran protein solution($10^{-3}$ wt%, 5 mM bis-tris, pH 7) was increased with increasing concentrations and found a minimum value near pI. On heating, it was decreased slightly with increasing temperatures up to $70^{\circ}C$ and then increased above $80^{\circ}C$. Addition of sodium chloride was made the surface tension decrease. In conclusion, with Xylanase, rice bran protein concentrate can be successfully extracted from the rice bran of different cultivars and the Youngan rice bran protein was thought to have best functionality among rice cultivars tested. It might be used as a milk protein substitute.
반도체 공정의 미세화 및 마이크로 시스템 기술의 발전 그리고 소형 무선PAN 및 이동통신 장치들의 급증으로 인하여 전자부품들의 소형화와 직접화에 대한 요구가 지속적으로 증가되고 있다. 본 연구에서는 휴대형 무선PAN 및 이동통신용 전자회로 설계에 다양한 목적으로 널리 사용되고 있는 기저대역의 수동소자들 중 미세 커패시터의 안정성과 전기적 특성을 확보하기 위하여, 유전체인 AIN을 사용하여 MIM구조로 제작된 미세 박막 커패시터 소자의 전기적인 특성을 분석하고 기저대역에서의 성능을 평가한다. 또한 제작된 미세 박막형 커패시터의 용량제어 방법을 제시함으로서 기저대역에서 범용으로 사용할 수 있는 미세 박막 커패시터의 모델을 제시하고자 한다. 또한, 주파수 대역에 따른 MIM구조의 AIN 커패시터 특성을 분석함으로서 향후 임베디드 소자와 집적화를 위한 고정밀의 미세수동 소자로서의 활용방안을 제시하고자한다.
As the 4th industrial age approaches, the demand for semiconductors is increasing enough to be used in all electronic devices. At the same time, semiconductor technology is also developing day by day, leading to ultraprecision and low power consumption. Semiconductors that keep getting smaller generate heat because the energy density increases, and the generated heat changes the shape of the semiconductor package, so it is important to manage. The temperature change is not only self-heating of the semiconductor package, but also heat generated by external damage. If the package is deformed, it is necessary to manage it because functional problems and performance degradation such as damage occur. The package burn in test in the post-process of semiconductor production is a process that tests the durability and function of the package in a high-temperature environment, and heat dissipation performance can be evaluated. In this paper, we intend to review a new material formulation that can improve the performance of the adapter, which is one of the parts of the test socket used in the burn-in test. It was confirmed what characteristics the basic base showed when polyamide, a high-molecular material, and alumina, which had high thermal conductivity, were mixed for each magnification. In this study, functional evaluation was also carried out by injecting an adapter, a part of the test socket, at the same time as the specimen was manufactured. Verification of stiffness such as tensile strength and flexural strength by mixing ratio, performance evaluation such as thermal conductivity, and manufacturing of a dummy device also confirmed warpage. As a result, it was confirmed that the thermal stability was excellent. Through this study, it is thought that it can be used as basic data for the development of materials for burn-in sockets in the future.
상호에스테르 교환반응에 의한 폴리(에틸렌 나프탈레이트)/폴리(부틸렌 테레프탈레이트) (PEN/PBT) 블렌드의 물성 변화에 대하여 살펴보았다. PBT를 PEN에 블렌딩하는 경우 상대적으로 낮은 PBT의 용융점도에 의하여 PEN의 용융점도가 감소됨을 확인할 수 있었으며 PEN과 PBT의 상호에스테르 교환반응에 의하여 추가적인 용융점도 감소가 있음을 알 수 있었다. 윤활제로 calcium stearate(CaST)를 첨가하면 CaST는 윤활제로서의 역할과 함께 PEN과 PBT의 상호에스테르 교환반응을 촉진하는 역할을 하여 용융점도가 현저하게 감소됨을 확인하였다. 상호에스테르 교환반응을 이용한 반응 용융가공은 PEN과 PBT그리고 이들 블렌드의 분자량을 감소시키며 그 결과 기계적 물성 감소를 초래함을 확인할 수 있었다.
Cost-effective functional phosphor nanoparticles are prepared by introducing low-cost $SiO_2$ spheres to rare-earth phosphor ($YVO_4:Eu^{3+}$, $YVO_4:Er^{3+}$, and $YVO_4:Nd^{3+}$) shells using a sol-gel synthetic method. These functional nanoparticles are characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and general photoluminescence spectra. The $SiO_2$ sphere occupying the interior of the conventional phosphor is advantageous in significantly reducing the cost of expensive rare-earth phosphor nanoparticles. The sol-gel process facilitates the core-shell structure formation; the rare-earth shell phosphor has strong interactions with chelating agents on the surfaces of $SiO_2$ nanoparticles and thus forms layers of several nanometers in thickness. The photoluminescence wavelength is simply tuned by replacing the active materials of $Eu^{3+}$, $Er^{3+}$, and $Nd^{3+}$. Moreover, the photoluminescent properties of the core-shell nanoparticles can be optimized by manipulating the specific contents of active materials in the phosphors. Our simple approach substitutes low-cost $SiO_2$ for expensive rare-earth-based phosphor materials to realize cost-effective phosphor nanoparticles for various applications.
Current interest in the regioselective N-functionalization of tetraazacycloalkanes (cyclen and cyclam) stems mainly from their complexes with radioactive metals for applications in diagnostic ($^{64}Cu,\;^{111}In,\;^{67}Ga$) and therapeutic ($^{90}Y$) medicine, and with paramagnetic ions for magnetic resonance imaging ($Gd^{+3}$). Selective methods for the N-substitution of cyclen and cyclam is a crucial step in most syntheses of cyclen and cyclam-based radiometal complexes and bifunctional chelating agents. In addition, mixing different pendent groups to give hetero-substituted cyclen derivatives would be advantageous in many applications for fine-tuning the compound's physical properties. So far, numerous approaches for the regioselective N-substitution of tetraazacycloalkanes and more specifically cyclen and cyclam are reported. Unfortunately, none of them are general and every strategy has its own strong points and drawbacks. Herein, we categorize numerous regioselective N-alkylation methods into three strategies, such as 1) direct substitution of the macrocycle, 2) introductiou of the functional groups prior to cyclization, and 3) protection/iunclionallrationideproteclion. Our discussion is also split into the methods of mono- and tri-functionalization and di-functionalizataion based on number of substituents. At the end, we describe new trials for the new macrocycles which iorm more stable metal complexes with various radiometals, and briefly mention the commercially available tetraazacycloalkanes which are used for the biconjugation of biomolecules.
As the clothing materials have been more functional and advanced, the cotton fabrics for dress shirts or blouses have been more qualified and the sewability for high degree of completion has been required. This study aims to identify the seam strength depending on the change of stitch density of fine cotton fabrics by fabric and thread and so the general seam performance of fine cotton fabrics by analyzing the seam efficiency and breaking mode of seams. For an experiment, 3 kinds of fine cotton fabrics and 2 kinds of threads were selected and the sample was made by changing the stitch density by four steps. Then, the seam strength was measured. Next, the seam efficiency and breaking mode of seams were analyzed on the basis of the results of seam strength measurement. The results are as follows: All fabrics showed the similar tendency in seam strength. The seam strength is related to the tensile strength and thread strength, it increased only to a certain stitch density. When the stitch density exceeded a certain level, fabrics were destroyed or threads were cut. Then, the seam strength didn't increase. Furthermore, the more the seam strength increased, the more the seam efficiency increased. For increasing the maximum stitch density, it was required to use the fabrics and threads which had similar properties, in other words, the high thread strength for the high tensile strength and the low thread strength for the high tensile strength.
Shen, Amy Q.;Hamlington, B.D.;Knoblauch, Michael;Peters, Winfried S.;Pickard, William F.
Smart Structures and Systems
/
제2권3호
/
pp.225-235
/
2006
With the discovery in plants of the proteinaceous forisome crystalloid (Knoblauch, et al. 2003), a novel, non-living, ATP-independent biological material became available to the designer of smart materials for advanced actuating and sensing. The in vitro studies of Knoblauch, et al. show that forisomes (2-4 micron wide and 10-40 micron long) can be repeatedly stimulated to contract and expand anisotropically by shifting either the ambient pH or the ambient calcium ion concentration. Because of their unique abilities to develop and reverse strains greater than 20% in time periods less than one second, forisomes have the potential to outperform current smart materials as advanced, biomimetic, multi-functional, smart sensors or actuators. Probing forisome material properties is an immediate need to lay the foundation for synthesizing forisomebased smart materials for health monitoring of structural integrity in civil infrastructure and for aerospace hardware. Microfluidics is a growing, vibrant technology with increasingly diverse applications. Here, we use microfluidics to study the surface interaction between forisome and substrate and the conformational dynamics of forisomes within a confined geometry to lay the foundation for forisome-based smart materials synthesis in controlled and repeatable environment.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.