• Structural Engineering and Mechanics
• /
• 제39권1호
• /
• pp.47-75
• /
• 2011

An accurate substructural synthesis method including random responses synthesis, frequency-response functions synthesis and mid-order modes synthesis is developed based on rigorous substructure description, dynamic condensation and coupling. An entire structure can firstly be divided into several substructures according to different functions, geometric and dynamic characteristics. Substructural displacements are expressed exactly by retained mid-order fixed-interfacial normal modes and residual constraint modes. Substructural interfacial degree-of-freedoms are eliminated by interfacial displacements compatibility and forces equilibrium between adjacent substructures. Then substructural mode vibration equations are coupled to form an exact-condensed synthesized structure equation, from which structural mid-order modes are calculated accurately. Furthermore, substructural frequency-response function equations are coupled to yield an exact-condensed synthesized structure vibration equation in frequency domain, from which the generalized structural frequency-response functions are obtained. Substructural frequency-response functions are calculated separately by using the generalized frequency-response functions, which can be assembled into an entire-structural frequency-response function matrix. Substructural power spectral density functions are expressed by the exact-synthesized substructural frequency-response functions, and substructural random responses such as correlation functions and mean-square responses can be calculated separately. The accuracy and capacity of the proposed substructure synthesis method is verified by numerical examples.

• ETRI Journal
• /
• 제27권5호
• /
• pp.647-650
• /
• 2005

A new configuration to realize the most general n-th order voltage transfer function is proposed. It employs only one operational transresistance amplifier (OTRA) as the active element. In the synthesis of the transfer function, the RC:-RC decomposition technique is used. To the best of author's knowledge, this is the first topology to be used in the realization of n-th order transfer function employing single OTRA.

• 한국소음진동공학회논문집
• /
• 제11권5호
• /
• pp.123-130
• /
• 2001

The purpose of this paper is to reduce the level of idling vibration on a steering wheel. In some cases, vibration on steering wheel is amplified due to the resonance between the first natural frequency of T-beam and engine idling speed. Using SDM(structural dynamic modification) technique, T-beam is redesigned to reduce its vibration. This paper used FRF(frequency response function) synthesis technique which is entirely dependent on experiment. But this method requires lots of test efforts to enhance its reliability of design. While combining this method with an analytic method. the experimental burden, the major drawback of FRP synthesis method, can be considerably relieved. Using ana1ytic sensitivity analysis, some effective modification regions are preliminarily chosen as candidate Positions where SDM can be applied to modify T-beam\`s dynamic characteristics.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.10-18
• /
• 2007

We synthesize and analyze the optical transfer function(OTF) of the modified triangular interferometer(MTI) using two-pupil synthesis method and we present the optimal MTI, which can obtain any bipolar function by combining a wave plate and a linear polarizer. Also, we analyze its potential phase error sources caused by polarization components.

• Bulletin of the Korean Chemical Society
• /
• 제29권7호
• /
• pp.1412-1414
• /
• 2008

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.57-65
• /
• 2006

An approximate function approach has been developed using the subsystem synthesis method for real-time multibody vehicle dynamics models. In this approach, instead of solving loop closure constraint equations of the suspension linkage, approximate functions are used. The approximate function represents the functional relationship between dependent coordinates and independent coordinates of the suspension subsystem. This kinematic relationship is also included in the suspension subsystem equations of motion. Different order of polynomial functions are tried to find out the best candidate functions. The proposed method is also compared with the conventional subsystem synthesis method to verify its efficiency and accuracy.

• 전기학회논문지P
• /
• 제54권1호
• /
• pp.34-40
• /
• 2005

This paper presents a frequency transfer function synthesis for simplifying a high-order model with time delay to a low-order model. A model reduction is based on minimizing the error function weighted by the numerator polynomial of reduced systems. The proposed method provides better low frequency fit and a computer aided algorithm. And in this paper, we present a design method of PID controller for achieving the desired specifications via the reduced model. The proposed method identifies the parameter vector of PID controller from a linear system that develops from rearranging the two dimensional input matrices and output vectors obtained from the frequency bounds.

• 전자공학회논문지SC
• /
• 제37권2호
• /
• pp.8-15
• /
• 2000

본 연구는 가중함수의 주파수 영역 해석에 의한 H∞ 최적 제어기를 설계하고 이를 대상 시스템에 적용하여 해석하였다. 이는 가중함수와 개 루프 전달함수에서 견실성을 만족하는 영역과 매개변수 γ의 최적 값이 존재하는 영역을 도시하고 H∞ 최적 제어기를 구성하기 위한 알고리즘을 간략화 시킬 수 있다. 또한 제안된 방법에 의해 설계된 제어기는 플랜트 불확실성의 변화에도 불구하고 어떠한 동작점에서도 원하는 사양과 성능을 만족하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.101-104
• /
• 2002

This paper propose that is algorithm of power dissipation reduction in the high level synthesis design for DSP(Digital Signal Processor), as the portable terminal system recently demand high power dissipation. This paper obtain effect of power dissipation reduction and switching activity that increase correlation of operands as input data of function unit. The algorithm search loop or repeatedly data to the input operands of function unit. That can be reduce the power dissipation using the new low power high level synthesis algorithm. In this Paper, scheduling operation search same nodes from input DFG(Data Flow Graph) with correlation coefficient of first input node and among nodes. Function units consist a multiplier, an adder and a register. The power estimation method is added switching activity for each bits of nodes. The power estimation have good efficient using proposed algorithm. This paper result obtain more Power reduction of fifty percents after using a new low power algorithm in a function unit as multiplier.

• Bulletin of the Korean Chemical Society
• /
• 제27권7호
• /
• pp.1053-1055
• /
• 2006