• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.3
• /
• pp.79-89
• /
• 2011

The wasted corn stalk from Gangwon province is composed of 44.6 % glucan, 19.0 % xylan, 23.8 % lignin, 4.5 % ash and 8.1 % others. Statistical analysis, full factorial design, revealed that temperature was the most influential factor in the dilute sulfuric acid pretreatment and that the influence of temperature on xylose yield was 3.5 and 3.2 times higher than those of treatment time and acid concentration, respectively. Temperature was also the most influential factor for glucose yield in the pretreatment but it was less than 5 % throughout the pretreatment. Although minor sugar yield was observed when microwave or ultrasonication was solely introduced as a pretreatment method, the complex method incorporating microwave or ultrasonication into dilute sulfuric acid pretreatment enhanced sugar yield significantly. In particular, xylose yield was doubled when microwave and dilute sulfuric acid treatment was sequentially applied. The optimization of pretreatment and enzymatic hydrolysis as well as the investigation on the complex pretreatment in detail are left for further study.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.132-140
• /
• 2022

This study was conducted to identify the optimal lotion manufacturing conditions with decursin and decursinol angelate of Angelica gigas Nakai extraction. Lotion was confirmed that it had viscosity (5,208±112 cPs), assay (99.71±1.01%), and pH (5.62) for 3 months. The optimization of manufacturing conditions of mixing 4 for lotion formulation were made by 22+3 full factorial design. Mixing temperature (40-80℃) and mixing time (10-30 min) were used as independent variables with three responses(assay, pH, and weight variation) as critical quality attributes (CQAs). The model for assay and weight variation identified a proper fit having a determination coefficient of the regression equation (about 0.9) and a p-value less than 0.05. Estimated conditions for the optimal manufacturing process of lotion were 61.93℃ in mixing temperature and 15.85 min in mixing time. Predicted values at the mixing temperature (60℃) and mixing time (20 min) were 100.69% of assay, 5.57 of pH, and 98.07% of weight variation. In the verification of the actual measurement the obtained values showed 100.29±0.98% of assay, 5.57±0.02 of pH, and 98.27±0.89% of weight variation, respectively, in good agreement with predicted values.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1123-1129
• /
• 2015

A pair of two-way valves typically is used in automotive washing machines, where the water flow direction is frequently reversed and highly pressurized clean water is sprayed to remove the oil and dirt remaining on machined engine and transmission blocks. Although this valve system has been widely used because of its competitive price, its application is sometimes restricted by surging effects, such as pressure ripples occurring in rapid changes in water flow caused by inaccurate valve control. As an alternative, one three-way reversing valve can replace the valve system because it provides rapid and accurate changes to the water flow direction without any precise control device. However, a cavitation effect occurs because of the complicated bottom plug shape of the valve. In this study, the cavitation index and percent of cavitation (POC) were introduced to numerically evaluate fluid flows via computational fluid dynamics (CFD) analysis. To reduce the cavitation effect generated by the bottom plug, the optimal shape design was carried out through a parametric study, in which a simple computer-aided engineering (CAE) model was applied to avoid time-consuming CFD analysis and difficulties in achieving convergence. The optimal shape design process using full factorial design of experiments (DOEs) and an artificial neural network meta-model yielded the optimal waist and tail length of the bottom plug with a POC value of less than 30%, which meets the requirement of no cavitation occurrence. The optimal waist length, tail length and POC value were found to 6.42 mm, 6.96 mm and 27%, respectively.

• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1911-1920
• /
• 2022

Objective: This study was performed to determine the apparent metabolizable energy (AME_n) content of tannin-free red/bronze, white/tan and U.S. No. 2 varieties of grain sorghum for feeding Japanese quail and validate their nutrient profile by evaluating effects on performance and carcass traits with full-substitution of corn. Methods: Experiment 1 determined the AME_n content of red/bronze, white/tan, and U.S. No. 2 grain sorghum varieties fed to mixed-sex Japanese quail (Coturnix japonica) (n = 314) at 3 and 6-weeks of age. Analyses were based on a 2×4 factorial treatment design with age and grain types defining the treatments, and a randomized complete block experiment design with cage and trials defining the block. AME_n values were validated by evaluating the performance and carcass traits of Japanese quail (n = 644) from 1 to 40 days of age in Experiment 2 with birds were fed 1 of 4 complete diets. Statistical analyses were conducted on performance data and select individual carcass trait measurements. Results: Determined AME_n values at 3-weeks of age were 3,524±122.03 (red/bronze), 3,252±122.03 (white/tan), and 3,039±123.44 (U.S. No. 2) kcal/kg. At 6-weeks of age, determined AME_n were 3,373±297.35 (red/bronze), 3,279±297.35 (white/tan), and 2,966±298.64 (U.S. No. 2) kcal/kg. Carcass traits showed live body weight (p = 0.0409) and hot carcass weight (p = 0.0234) were greatest in U.S. No. 2; however, carcass yield (p<0.0001) was lowest. No significant differences were observed among treatments for feed intake, feed conversion ratio, breast weight and breast yield (p>0.05). Conclusion: These studies demonstrated that tannin-free grain sorghum varieties may be a potential alternative to corn in quail diets while maintaining growth performance and carcass parameters.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1729-1737
• /
• 2010

This study was conducted to establish the optimal medium condition for the animal probiotic Lactobacillus plantarum by using onion juice. Cell yield and antioxidant activity increased in proportion to high additive levels of onion juice in medium. Onion juice, sucrose and yeast extract were selected as media ingredient factors and the effects of their mixed ratio in medium were evaluated. The full factorial design consisted of 24 experimental runs and was employed to estimate the main effects of the factors and their interactions. Significant positive effects on cell yield and antioxidant activity was shown with yeast extract and onion juice, respectively. Significant interaction was found only between sucrose and yeast extract in antioxidant activity. Finally, we selected an optimal medium that was composed of (g/l) onion juice, 600; sucrose, 15; yeast extract, 5. The efficiency of this optimum medium was estimated by using a 5 l jar fermenter. As a result, the maximum cell yield was $9.7\;{\log}_{10}$ (CFU/ml) at 12 hr. Cell yield at the end of incubation (20 hr) was $8.9\;{\log}_{10}$ (CFU/ml) and it was very similar with the predicted value, $9.0\;{\log}_{10}$ (CFU/ml). Antioxidant activity of culture was maintained at about 60~65% during all incubation time, resulting in a higher-than-predicted activity of 47.1%.

• Korean Journal of Organic Agriculture
• /
• v.29 no.4
• /
• pp.613-623
• /
• 2021

This study was conducted to investigate the effect of addition levels of coffee and green tea by products extract including polyphenols through hot water extraction on rumen fermentation. The treatment groups consisted of coffee extract (CO), green tea extract (GR) and mixed extract (MIX), and the addition level was 10 µL, 20 µL and 30 µL of three levels. The experiment consisted of a total of 10 experimental groups including the control group, and a full factorial design was used. The effect of polyphenol addition in coffee and green tea by-products was analyzed through main and interaction effect of statistical analysis. The total polyphenol content of the extracts was 106.15, 79.10 and 185.25 ㎍ GAE/g DM for coffee by-product, green tea by-product and mixture, respectively. Total gas production was significantly lower in the treatment groups than in the control (114.00 mL/gDM) (p<0.05). Methane emission tended to decrease as the polyphenol addition level increased. Moreover, the MIX showed the lowest methane emission when 30 µL was added (p<0.05). Volatile fatty acids showed a significant difference compared to the treatment group as a control (98.06 mM) (p<0.05), but there was no change according to the level of polyphenols. As a result of the main effect and interaction, it is thought that the effect on methane reduction and improvement of rumen fermentation in MIX20 can be expected. In a series of studies, the addition of 20 µL of a blended extract of coffee and green tea by-products is thought to reduce methane to levels that do not inhibit rumen fermentation.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.344-357
• /
• 2020

Strain improvement and bioprocess development were undertaken to enhance hyaluronic acid(HA) production by Streptococcus zooepidemicus cells. Using a high-yielding mutant strain, statistical medium optimization was carried out in shake flask cultures, resulting in 52% increase in HA production (5.38 g/l) at the optimal medium composition relative to the parallel control cultures. For sufficient supply of dissolved oxygen (DO), which turned out to be crucial for enhanced production of HA, agitation system and speed were intensively investigated in 5 L bioreactor cultures. Increase in oxygen mass transfer coefficient (k_La) through increment of agitation speed (rpm) and 35% expansion of diameter of the newly-designed impellers showed significantly positive effects on HA production. By installing an expanded Rushton-turbine impeller for efficient break-down of sparged air, and an extended marine impeller above the Rushton-turbine impeller for efficient mixing of the air-born viscous fermentation broth, maximum amount of HA (9.79 g/l) was obtained at 450 rpm, 1.8 times higher level than that of the corresponding flask culture. Subsequently, the possibility of bioprocess scale-up to a 50 L bioreactor was investigated. Despite almost identical maximum HA production (9.11 vs 9.25 g/l), the average HA volumetric productivity (r_p) of the 50 L culture turned out only 74% compared to the corresponding 5 L culture during the exponential phase, possibly caused by shear damages imposed on the producing cells at the high stirring in the 50 L culture. The scale-up process could be successfully achieved if a scale-up criterion of constant oxygen mass transfer coefficient (k_La) is applied to the 50 L pilot-scale bioreactor system.