• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.99-100
• /
• 2007

ZnO films on $Al_2O_3$ substrates were grown using a pulsed laser deposition method. Through photoluminescence (PL) and X-ray diffraction (XRD) measurements, the optimum growth conditions for the ZnO growth were established. The results of the XRD measurements indicate that ZnO films were strongly oriented to the c-axis of the hexagonal structure and epitaxially crystallized under constraints created by the substrate. The full width half maximum for a theta curve of the (0002) peak was $0.201^{\circ}$. Also, from the PL measurements, the grown ZnO films were observed to give free exciton behaviour, which indicates a high quality of the epilayer. The Hall mobility and carrier density of the ZnO films at 293 K were estimated to be $299\;cm^2/V\;s$ and $8.27\;{\times}\;10^{16}\;cm^{-3}$, respectively. The absorption spectra revealed that the temperature dependance of the optical band gap on the ZnO films was $E_g(T)\;=\;3.439\;eV\;-\;(5.30\;{\times}\;10^{-4}\;ev/K)T^2(367\;+\;T)$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.278.2-278.2
• /
• 2013

그래핀은 우수한 전기적, 기계적, 광학적 특성들로 인하여 전자소자, 센서, 에너지 재료 등으로의 응용이 가능하다고 알려진 단 원자층의 탄소나노재료이다. 특히 그래핀을 전자소자로 응용하기 위해서는 캐리어 농도, 전하 이동도, 밴드갭 등의 전기적 특성을 향상시키거나 제어하는 것이 요구되며, 에너지 소재로의 응용을 위해서는 높은 전기전도도와 함께 기능화를 통한 촉매작용을 부여하여 효율을 향상시키는 것이 요구된다. 일반적으로 화학적 도핑은 그래핀의 전기적 특성을 제어하는 효율적인 방법으로 알려져 있다. 화학적 도핑의 방법으로 질소, 수소, 산소 등 다양한 이종원소를 열처리 또는 플라즈마 처리함으로써 그래핀을 구성하는 탄소원자를 이종원자로 치환하거나 흡착시켜 기능화 처리된 그래핀을 얻는 방법들이 제시되었다. 이중 플라즈마를 이용한 도핑방법은 저온에서 처리가 가능하고, 처리시간, 공정압력, 인가전압 등 플라즈마 변수를 변경하여 도핑정도를 비교적 수월하게 제어할 수 있다는 장점을 가지고 있다. 본 연구에서는 열화학기상증착법으로 합성된 그래핀을 직류 플라즈마로 처리함으로써 효율적인질소도핑 조건을 도출하고자 하였다. 그래핀의 합성은 200 nm 두께의 니켈 박막이 증착된 몰리브덴 호일을 사용하였으며, 원료가스로는 메탄을 사용하였다. 그래핀의 질소 도핑은 평행 평판형 직류 플라즈마 장치를 이용하여 암모니아($NH_3$) 플라즈마로 처리하였으며, 플라즈마 파워와 처리시간을 변수로 최적의 도핑조건 도출 및 도핑 정도를 제어하였다. 그래핀의 질소 도핑 정도는 라만 스펙트럼의 G밴드의 위치와 반치폭(Full width at half maximum; FWHM)의 변화를 통해 확인하였다. NH3 플라즈마 처리 후 G밴드의 위치가 장파장 방향으로 이동하며, 반치폭은 감소하는 것을 통해 그래핀의 질소도핑을 확인하였다.

• 한국재료학회지
• /
• 제15권9호
• /
• pp.604-607
• /
• 2005

Dependence of the crystallinity, surface roughness, carrier concentration, carrier mobility, electrical resistivity and transmittance of Al-doped ZnO films deposited on glass substrates by RF-magnetron sputtering on effects of the ratio of the RF power for AlZnO to that for ZnO (R) have been investigated. X-ray diffraction spectra show strong preferred orientation along the c-axis. The full width at half maximum (FWHM) of the ZnO (002) peak decreases slightly as R increases in the range of R<1.0, whereas it increases substantially in the range of R>1.0. Scanning electron micrographs (SEM) show that the ZnO film surface becomes coarse as R increases. The carrier concentration and the carrier mobility in the ZnO thin film are maximal for R=1.5 and 1.0, respectively. The electrical resistivity is minimal for R=1.0 The transmittance of the ZnO:Al film tends to increase, but to decrease slightly in the range of R>0.5. It may be concluded that the optimum R value is 1.0, considering all these analysis results. The cause of the changes in the structure and physical properties of ZnO thin films with R are also discussed.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.243-244
• /
• 2012

산화아연 나노구조를 금을 금속촉매로 사용하여 실리콘 기판위에 기상이동법으로 성장하였다. 성장할 때 소스(source)와 기판 사이의 거리는 5에서 50 mm로 변화를 주며 아르곤과 산소 분위기에서 $900^{\circ}C$로 성장하였다. 산화아연 나노구조의 구조적 및 광학적 특성을 조사하기 위해 field-emission scanning electron microscopy, X-ray diffraction (XRD), 그리고 photoluminescence (PL)를 이용하였다. 산화아연 나노구조는 나노선과 나노입자의 형태로 성장하였다. 산화아연 나노구조의 광학적 특성은 소스와 기판사이의 거리가 가까울수록 향상되었다. 특히, 소스와 기판사이의 거리가 5 mm 일 때, 산화아연 나노선이 관찰되었으며 XRD 와 PL 분석에서 나타난 반가폭 (full width at half maximum)은 $0.061^{\circ}$ 와 96 meV로써 가장 작았다. 산화아연 나노선은 산화아연 나노입자와 비교하여, 결정성 및 광학적 특성이 우수하였다.

• Advances in Energy Research
• /
• 제3권2호
• /
• pp.117-124
• /
• 2015

In this paper, we have reported an enhancement in thermoelectric properties of un-doped zinc oxide (ZnO) grown by molecular beam epitaxy (MBE) on silicon (001) substrate by annealing treatment. The grown ZnO thin films were annealed in oxygen environment at $500^{\circ}C-800^{\circ}C$, keeping a step of $100^{\circ}C$ for one hour. Room temperature Seekbeck measurements showed that Seebeck coefficient and power factor increased from 222 to $510{\mu}V/K$ and $8.8{\times}10^{-6}$ to $2.6{\times}10^{-4}Wm^{-1}K^{-2}$ as annealing temperature increased from 500 to $800^{\circ}C$ respectively. This observation was related with the improvement of crystal structure of grown films with annealing temperature. X-ray diffraction (XRD) results demonstrated that full width half maximum (FWHM) of ZnO (002) plane decreased and crystalline size increased as the annealing temperature increased. Photoluminescence study revealed that the intensity of band edge emission increased and defect emission decreased as annealing temperature increased because the density of oxygen vacancy related donor defects decreased with annealing temperature. This argument was further justified by the Hall measurements which showed a decreasing trend of carrier concentration with annealing temperature.

• 한국재료학회지
• /
• 제31권1호
• /
• pp.54-59
• /
• 2021

In this work, narrow-band green-emitting CsPbBr3 particles are embedded in commercialized glass composites by a facile dry process. By optimizing the method through sintering in glass frit (GF) composites including CsBr and PbBr2, used as precursors, the encapsulation of CsPbBr3 particles made them waterproof with green fluorescence. To improve the fluorescent properties by reducing aggregation of CsPbBr3, fumed silica (FS) is additionally used to help particles avoid bulking up in the glass matrix. The CsPbBr3 perovskite/glass composites are characterized using scanning electron microscopy (SEM) images and energy-dispersive X-ray spectroscopy (EDS) maps, which support the existence of CsPbBr3 particles in the glass matrix. The photoluminescence (PL) properties demonstrate that the emission spectrum peak, full width at half maximum (FWHM), and photoluminescence quantum yield (PLQY) values are 519 nm, 17 nm, and 17.7 %. We also confirm the water-resistant properties. To enhance water/moisture stability, the composite sample is put directly into water, with its PLQY monitored periodically under UV light.

• 센서학회지
• /
• 제30권1호
• /
• pp.56-60
• /
• 2021

In this study, the relationship between the transmitted light intensity and full-width-at-half-maximum (FWHM) of a Fabry-Perot filter was investigated. The measured refractive indices and absorption coefficients of the fabricated thin films were applied to the Fabry-Perot filter via simulations using optical software. Although considerable research has been conducted on Fabry-Perot filters, this study focused on the usefulness of 4.26-㎛ infrared filtering in carbon dioxide detection. Optical analysis was performed considering the effects of the thickness, refractive indices, and number of thin films in a distributed Bragg reflector. Ultimately, a clear trade-off relationship was observed wherein the transmitted light intensity decreased as the number of multilayers increased; however, the FWHM was observed to be narrower.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.1982-1990
• /
• 2022

The purpose of this study was to verify the possibility of fuel rod pattern analysis in a fresh fuel assembly using the Yonsei single-photon emission computed tomography (YSECT) system. The YSECT system consisted of three main parts: four trapezoidal-shaped bismuth germanate scintillator-based 64-channel detectors, a semiconductor-based multi-channel data acquisition system, and a rotary stage. In order to assess the performance of the prototype YSECT, tomographic images were obtained for three representative fuel rod patterns in the 6 × 6 array using two representative image-reconstruction algorithms. The fuel-rod patterns were then assessed using an in-house fuel rod pattern analysis algorithm. In the experimental results, the single-directional projection images for those three fuel-rod patterns well discriminated each fuel-rod location, showing a Gaussian-peak-shaped projection for a single 10 mm-diameter fuel rod with 12.1 mm full-width at half maximum. Finally, we successfully verified the possibility of the fuel rod pattern analysis for all three patterns of fresh fuel rods with the tomographic images obtained by the rotational YSECT system.

• 센서학회지
• /
• 제31권5호
• /
• pp.353-359
• /
• 2022

This study investigated via computational analysis the application utility of series-cascaded ring resonators based on silicon-on-insulator (SOI) slot optical waveguides in integrated optical biochemical sensors. The radii of the two rings in the series-cascaded ring resonators were 59.4 ㎛ and 77.6 ㎛ respectively, and the coupling distance was 0.5 ㎛. The series-cascaded ring resonators were computationally analyzed using FIMMProp and PICWave numerical software. The free spectral range (FSR), full width at half maximum (FWHM), sensitivity, and quality-factor (Q-factor) of the series-cascaded ring resonators were 12.2 nm, 0.134 nm, 4100 nm/RIU, and 11580, respectively, and the measurement range was calculated to be slightly smaller than 3×10^-3 RIU. Although the measurement range was smaller than that of the single ring resonator, upon considering other characteristic parameters, the series-cascaded ring resonators are found to be more effective as integrated sensors than single ring resonators.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2567-2571
• /
• 2023

Scintillator materials are widely used in the medical and industrial fields for imaging systems using gamma cameras. In this study, image evaluation is performed by modeling a gamma camera system based on a lutetium-yttrium oxyorthosilicate (LYSO) scintillation detector using a pinhole collimator that can improve the spatial resolution. A LYSO detector-based gamma camera system is modeled using a Monte Carlo simulation tool. The geometric concept of the pinhole collimator is designed using various magnification factors, and the spatial resolution is measured using the acquired source image. To evaluate the resolution, the full width at half maximum (FWHM) and natural image quality assessment (NIQE), a no-reference-based parameter, are used. We confirm that the FWHM and NIQE values decrease simultaneously when the diameter of the pinhole collimator increases. Additionally, we confirm that the spatial resolution improves as the magnification factor increases under the same pinhole diameter condition. Particularly, a 0.57 mm FWHM value is obtained using the modeled gamma camera system with a LYSO scintillation detector. In conclusion, our results demonstrate that a pinhole collimator with a LYSO scintillation detector is a promising gamma camera imaging system.