• International Journal of Computer Science & Network Security
• /
• 제22권1호
• /
• pp.347-357
• /
• 2022

The aim of the study is to model demand for full-time Bachelor's Degree Programs in Hospitality and Catering, taking into account the influence of the main determinants in the COVID-19 pandemic. The research used methods of algorithms, correlation and regression analysis, ANOVA, graphical method, deduction and induction, abstraction, etc. It was found that the demand for full-time Bachelor's Degree Programs in Hospitality and Catering is price elastic. It has been argued that it is useful to consider both price and non-price determinants when modelling demand for full-time Bachelor's Degree Programs in Hospitality and Catering. It is proved that the main determinants of demand for full-time Bachelor's Degree Programs in Hospitality and Catering are full-time tuition fee, maximum government order, license volume and Consolidated Ranking of a higher education institution (HEI). In this case, the applicant decides to enrol in a full-time Bachelor's Degree Program in Hospitality and Catering, guided by the optimal ratio of tuition fee and the prestige of the HEI.

• 한국전산구조공학회논문집
• /
• 제23권4호
• /
• pp.343-351
• /
• 2010

도로교설계기준(건설교통부, 2005)에 따르면 바닥판 경간비(B/L)가 0.5이하인 박스거더교에서는 상부플랜지의 전폭이 휨 압축응력 또는 축압축응력에 대하여 유효한 것으로 볼 수 있다. 그러나 세그먼트 자중 등에 의한 휨모멘트와 케이블 수직압축력에 의한 합성응력이 발생되고 바닥판 경간비가 변하는 사장교의 시공단계에서는 전단지연의 영향범위가 다를 수 있다. 이 연구에서는 1면 케이블 콘크리트 박스 사장교를 대상으로 시공단계시 보강형에 고려되어야 할 합성응력에 의한 유효플랜 지폭을 분석하였다. 그 결과 바닥판 경간비가 0.38이하의 범위에서 보강형의 전폭을 유효플랜지폭으로 적용할 수 있는 것으로 해석되었다. 즉, 1면 케이블 박스 사장교의 경우 전단지연을 고려하여 할 범위가 박스거더교보다 커야할 것으로 분석되었다. 따라서 시공단계시 변화되는 바닥판 경간비의 크기에 관계없이 전폭을 유효플랜지폭으로 반영하는 실무관행은 안전측 설계가 되지 못할 수 가 있다. 또한 시공단계시 선단부를 제외한 영역의 합성응력에 대한 검토는 바닥판 경간비가 크게 나타나는 초기 시공단계에서는 단경간 구조계로 보고 산정한 유효플랜지폭을 적용할 경우 안전측 설계가 된다. 그러나 바닥판 경간비가 작아짐에 따라서는 전폭과 캔틸레버 구조계로 유효플랜지폭을 결정하는 것이 타당한 것으로 분석되었다.

• 임산에너지
• /
• 제21권1호
• /
• pp.65-75
• /
• 2002

본 연구는 주요 활엽수종을 대상으로 인위적으로 광선의 강도를 달리한 유묘의 생장과 물질생산량에 대한 수목의 생장패턴을 구명하기 위하여 실시되었다. 연구대상 수종은 자작나무, 박달나무, 느티나무, 고로쇠나무, 산벚나무, 쥐똥나무 등이며, 자연전광을 100%, 38-62%, 22-28%, 7-20%, 2-6%로 조절된 피음포지를 조성후 2년간 실시한 결과는 다음과 같았다. 일반적으로 양수로 분류되는 수종으로서 전광에서의 묘고와 근원경의 상대생장율이 자작나무와 박달나무는 피음 강도가 강한 투광을 2-6% 처리구보다 약 2배 이상 우수한 생장율을 나타냈다. 내음성이 상대적으로 강하다고 분류되는 수종의 묘고와 근원경 생장율은 투광을 38∼62% 피음 처리구에서 고로쇠나무와 쥐똥나무는 다른 처리구에 비해 양호한 생장을 보였다. 대부분의 수종에서 피음처리 수준에 따른 광량 감소와 함께 총물질생산량이 급격히 감소하였고, 잎과 줄기의 비율이 뿌리에 비해 증가하는 경향을 보였다. 유묘의 T/R율은 대부분의 수종이 피음의 강도가 강할수록 T/R율이 높아지는 경향으로 전광처리구 0.6∼3.2보다 투광을 2-6% 피음 처리구가 1.1∼5.0으로 높게 나타냈다. 전체적으로 비교할 때 조사 대상의 모든 활엽수 묘목에서 피음처리에 의한 광량이 감소할수록 SLA가 증가하는 경향으로, LAR과 LWR에서도 유사한 경향을 보여 광환경의 변화에 따른 피음의 강도가 강할수록 통계적으로 유의적인 차이를 보이며 증가하였다. 그러나 자작나무의 경우에는 LWR이 점진적으로 증가하다가 투광을 6% 미만의 최강피음 처리구에서 급격히 감소하는 경향을 보였다. 이러한 결과는 강한 피음에 의한 식물테의 물질생산 저하가 엽면적 및 엽량의 감소등 수체 내의 생리적 특성에 영향을 미친 것으로 생각된다.향상되었음을 알 수 있다. 이상의 결과에서 다양한 개입활동들이 환자의 치료순응도를 향상시키는 데 기여할 수 있음을 제시할 수 있다. 그러나 계량적 메타분석 기준에 부합되는 연구의 논문 수가 제한적이라는 한계점이 있으며, 연구에 사용되는 개입방법의 시도가 더욱 다양화될 필요성이 제시되고 있어 향후 이와 관련된 많은 연구들이 활성화되기를 기대한다.bscessation은 수술 후 4개월에서 7개월 사이에 발생하므로 follow-up 은 8개월까지 이루어져야 한다.장 싫어하는 것으로 나타났으며, 갈색란(Brown)과 난각색이 갈색에 가까운 시료(Trt-Brown)사이와 백색란(White)과 백색에 가까운 시료(Trt-White) 사이에는 통계적으로 유의차가 없었다. 난각색과 영양이 상관이 없다는 것을 교육한 후 실시한 두 번째 설문에서는 갈색에 가까운 계란(Tn-Brown)을 가장 좋아하여 1순위와 2순위가 바뀐 것 이외에는 첫 번째 질문의 결과와 같았다. 결론적으로 현재 우리나라에서는 갈색 정도의 차이 문제이지 갈색란을 좋아함을 알 수 있었고, 교육에 의해 조금씩은 고정 관념을 바꿀 수 있는 가능성을 확인할 수 있었다.ique impact at 0.70 km/s and 0.91 km/s were compared with experimental results and Eulerian hydrocode CTH simulation results. The Lagrangian code NET3D is superior to Eulerian code CTH in the computational accuracy. Agreement with the experimentally obtained final deformed cross-sections of the projectile is

• 한국식생활문화학회지
• /
• 제25권3호
• /
• pp.285-295
• /
• 2010

The purpose of this study was to compare the awareness of dietary patterns and health of full-time and employed housewives. The investigation gathered information on general characteristics, dietary lifestyle, nutritional status, and health by questionnaire as well as anthropometric measurements. The subjects included housewives living in Seoul and Gyeonggi Province (86 full-time and 127 working housewives) during November 2009 to January 2010. The average age, height, and weight of the housewives were $45.8{\pm}7.6\;yr$, $161.0{\pm}8.4\;cm$, and $55.7{\pm}6.3\;kg$, respectively. The average monthly income of the households was 3 million to 5 million won (31.4% full-time and 37.0% working housewives), and their average food expense was 200,000 to 500,000 won (46.5% full-time and 48.1% working housewives). More than 90% of the studied homes were nuclear families and the most common number of children was 2 to 3 (79.1% full-time and 76.4% working housewives). The ratio of employed housewives who ate regular meals was 35.4%, but that of the full-time housewives was 48.2% (p<0.05). Of the working housewives, 7.1% never ate breakfast and the primary reason for skipping breakfast was 'busy in the morning' (61.1%). The type of food that the housewives preferred when eating out was Korean food, both for the full-time and employed housewives (76.0%). All the housewives overate calories and the full-time housewives ate more protein, fat, vitamin A, vitamin B1, vitamin B6, niacin, vitamin C, vitamin E, folic acid, and cholesterol than the employed housewives (p<0.05). Both the full-time and employed housewives were more satisfied with supper than with other meals. About 30.6% of the full-time and 33.9% of the working housewives had no interest in health, but answered that regular exercise was very important for health (33.3% full-time and 39.7% working housewives). In conclusion, working housewives have poor dietary habits and nutrient intakes, thus substantial measures to improve these problems are urgently needed.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.49-63
• /
• 2008

The objectives of this research were to evaluate the pressurized/the main inlet water flowrate ratio which have been used as the most important parameter for operating the pump diffusion mixer until now, to suggest the alternative operating parameter and the relating criteria if the flowrate ratio was not inadequate. For the objectives of this research, computational fluid dynamics (CFD) simulation was conducted for 21 cases of flowrate ratio in full-scaled pump diffusion mixer. From the results of CFD simulation, the local velocity gradient values were calculated in each case in order to analyze the simulation results in more detail. For verifying CFD simulation, wet test was conducted. The wet test was to measure the factual coagulant dispersion distribution at a distance of 5.4m from deflector. From both results of CFD simulation and wet test, flowrate ratio was inadequate as operating parameter or criteria, on the other hand the pressurized/the main inlet velocity ratio(dimensionless) was useful in predicting the performance of pump diffusion mixer. Also, the injected coagulant could be dispersed evenly in overall cross section on the condition that pressurized/the main inlet velocity ratio(dimensionless) is over at least 20.

• 한국연소학회지
• /
• 제12권3호
• /
• pp.24-32
• /
• 2007

A theoretical model was developed for rotary kiln and computational study was conducted to find the effect of feeding characteristics. One dimensional model with the variations of heating distribution, length of heating zone, excess air ratio and revolution was considered. The comparison of parallel-flow rotary kiln with that of counter-flow was conducted. For parallel-flow type, it is found that the variation of temperature of solid is not great for the zone that is following flame-heating zone. This zone is good to take the special treatment because thermal deviation is small and contacting time is enough for another treatment. Increase of excess air ratio have the effect of decreasing solid temperature. But this effect of decreasing solid temperature goes small for the great excess air ratio. The heating is efficient for the flame which has the maximum heating at the central region of the full length.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.218-221
• /
• 2006

The past Korean Bridge Design Specifications have no limitation on the amount of lap splices of longitudinal bars in the plastic hinge zone of piers. A majority of bridge piers which have been non-seismically designed might have some lap splices in plastic hinge zone. Also a number of those piers in Korea have a low aspect ratio(height/section area). So, some problems such as low ductility behavior may happen. In this study, the real pier which was non-seismically designed and has a low aspect ratio was selected for the quasi-static tests. Two groups of full scaled RC pier models of which aspect ratios are about 2.26 and about 2.67 were fabricated. And then, quasi-static tests according to the drift level history method were implemented. From the test results, the failure of these test specimens have been shown in the complex shear-flexural or shear modes. The low aspect ratio and the lap splice have largely influenced on the seismic performance of bridge piers.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.239-246
• /
• 2017

A compact plasmonic switching scheme, based on the phase change of a thin-film chalcogenide material ($Ge_2Sb_2Te_5$), is proposed and numerically investigated at optical-communication wavelengths. Surface plasmon polariton modal analysis is conducted for various thicknesses of dielectric and phase-change material layers, and the optimized condition is induced by finding the region of interest that shows a high extinction ratio of surface plasmon polariton modes before and after the phase transition. Full electromagnetic simulations show that multiple reflections inside the active region may conditionally increase the overall efficiency of the on/off ratio at a specific length of the active region. However, it is shown that the optimized geometrical condition, which shows generally large on/off ratio for any length of active region, can be distinguished by observing the multiple-reflection characteristic inside the active region. The proposed scheme shows an on/off switching ratio greater than 30 dB for a length of a few micrometers, which can be potentially applied to integrated active plasmonic systems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1110-1115
• /
• 2002

The purpose of this study is to analyze the effects of the parameters of the suspension system in railway rolling-stock for KT-23 type passenger vehicle. According to the results of simulation and the small scale vehicle test. Optimal condition was obtained for the stiffness ratio of the primary spring and secondary spring of the suspension system. When the stiffness ratio was Increased, the vortical vibration was increased on the car body for empty and weight car. The result of this study are stable to use of the optimum parameter of the ride duality of KT-23 type vehicle. Also, it is usefull to development of full scale vehicle dynamomer

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.120-122
• /
• 2015

This study presents a new, simple method for improving the front-to-back (F/B) ratio of a microstrip patch antenna (MSA) based on surface wave suppression. The back radiation of the MSA is significantly reduced by using the meandered ground plane edges and placing split-ring resonators (SRRs) in the middle of the meandered slots. By loading SRRs near the center of the meandered ground plane edges, some parts of the diffracted back-lobe power density can be reduced further. Compared to the F/B ratio of a conventional MSA with a full ground plane of the same size, an improved F/B ratio of 18 dB has been achieved experimentally for our proposed MSA.