• 대한기계학회논문집B
• /
• 제38권2호
• /
• pp.155-163
• /
• 2014

주유소에서 거래되는 액체 연료인 석유류는 온도 변화에 따라 팽창과 수축하게 된다. 석유류의 체적팽창계수는 약 $0.1%/^{\circ}C$이고, 우리나라의 기온은 겨울철에는 $-15^{\circ}C$, 여름철에는 $35^{\circ}C$까지 변한다. 온도 변화에 따른 체적의 변화가 석유류 거래에 미치는 영향을 조사하기 위해 주유소에 저장된 연료와 주유되는 연료의 온도 변화를 측정하였다. 또 우리나라의 지난 50 년간의 일간, 월간, 년간 온도 변화를 고찰하였다. 지하 저장탱크의 유류 온도는 계절에 관계없이 하루 중 안정되게 유지되었다. 주유소 주위의 환경 조건과 위치, 주유 빈도등이 주유되는 유류의 온도에 영향을 미치는 것을 알 수 있었다. 이러한 연구 결과는 건전한 석유류의 거래와 관련 법령의 제정에 활용될 것이다.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.391-399
• /
• 2022

Hydrogen is one of the energy carriers and has high energy efficiency relative to mass. It is an eco-friendly fuel that makes only water (H₂O) as a by-product after use. In order to use hydrogen conveniently and safely, development of production, storage and transfer technologies is required and attempts are being made to apply hydrogen as an energy source in various fields through the development of the technology. For transporting and storing hydrogen include high-pressure hydrogen gas storage, a type of storage technologies consist of cryogenic hydrogen liquid storage, hydrogen storage alloy, chemical storage by adsorbents and high-pressure hydrogen storage containers have been developed in a total of four stages. The biggest issue in charging high-pressure hydrogen gas which is a combustible gas is safety and the backfire prevention device is that prevents external flames from entering the tank and prevents explosion and is essential to use hydrogen safely. This study conducted a numerical analysis to analyze the performance of suppressing flame propagation of 2, 3 inch flame arrestor. As a result, it is determined that, where the flame arrestor is attached, the temperature would be lowered below the temperature of spontaneous combustion of hydrogen to suppress flame propagation.

• Tribology and Lubricants
• /
• 제37권5호
• /
• pp.164-171
• /
• 2021

Ultrasonic sensors show various reception characteristics based on the density of the measurement medium; hence, they are used in various fields to benefit from the characteristics of ultrasonic signals. In this study, the reception characteristics according to the thickness of the first matching layer are compared and analyzed for application to gas tank microleak detection. Accordingly, three types of sensors are manufactured with varying thicknesses of the first matching layer, namely 4.8 mm, 5.1 mm, and 5.5 mm; further, a direct measurement method is used wherein the sensor is attached to the inside of the chamber. Experiments are conducted to observe the phase change due to microleakage, which is the most linear in the sensor with the 4.8 mm thick first matching layer. This is assumed to be the result of stable signal transmission and reception with little phase deviations over time because the first matching layer is closest to the ultrasonic wavelength. The other sensors show nonlinear results with increasing thickness of the first matching layer. Through this study, it is found that appropriately selecting the thickness of the first matching layer of the ultrasonic sensor can greatly influence sensor reliability.

• 한국수소및신에너지학회논문집
• /
• 제5권2호
• /
• pp.81-90
• /
• 1994

The hydrogen fuel tanks having hydrogen storing capacity of about 300g and 1200g are manufactured using $MmNi_{4.7}Al_{0.25}V_{0.05}Fe_{0.001}$ alloy. They are composed of several unit reactor made of Cu-tube(outer diameter = 50.1mm, thickness = 2mm). In order to increase the heat and mass transfer property of the hydride bed, Al-plates are inserted perpendicular to axial direction at intervals of 5mm and three arteries of diameter 8mm are installed symmetrically in each unit reactor. Hydrogen absorption is proceeded about 80% within 30 minute and is completed within 60 minute at the conditions of charging hydrogen pressure of 25atm and temperature of $22^{\circ}C$. On desorbing hydrogen at a constant rate of 30 slm at $20^{\circ}C$, discharging hydrogen pressure is sustained at 3~5atm for 120 minutes. The discharging pressure is increased upto 5~8atm as the increase of the reactor temperature to $30^{\circ}C$. From the experimental results and the brief discussions about the hydrogen absorption and disorption behaviors of the hydrogen storage tank, it is suggested that the behaviors of hydrogen charging and discharging could be controlled by adjusting the operating parameters and the reactor design parameters.

• 한국가스학회지
• /
• 제15권1호
• /
• pp.30-34
• /
• 2011

본 논문은 104L의 저장용량과 70MPa의 사용압력을 갖는 수소연료탱크용 복합소재 압력용기에 관한 강도안전성을 해석한 평가연구이다. 탄소섬유 복합용기의 내측은 6061-T6의 알루미늄 라이너를 사용하고, 외경측은 원주방향을 따라서 탄소섬유 후프층을 형성하고, 또한 $12^{\circ}C$ 적층과 $70^{\circ}C$ 적층을 헤리컬방향으로 경사지게 감아서 제작하였다. 복합소재 연료탱크의 강도안전성에 대한 FEM 해석결과는 US DOT-CFFC와 KS B ISO 11119-2 규정에 따라 평가되었다. FEM 해석결과에 의하면, 104L의 복합용기로 제시된 설계모델을 US DOT-CFFC와 KS B ISO 11119-2 기준으로 평가할 때 모두 안전하다할 수 있다. 그렇지만, 탄소섬유 연료탱크에 대한 계산결과는 한국의 평가기준을 사용하기보다는 미국의 안전기준을 적용하는 것이 더 안전하다는 해석결과를 알 수 있다. 따라서 70MPa의 수소연료 압력용기의 강도안전성을 충분히 확보하기 위해서는 미국의 DOT-CFFC 안전기준에 의거 평가하고 설계하는 것이 바람직하다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.23-26
• /
• 2004

Methyl Tertiary-Butyl Ether is one of several fuel oxygenates added to gasoline to improve fuel combustion and reduce tile resulting concentration of hydrocarbon. Thus, MTBE transfer readily to groundwater from gasoline leaking from Underground Storage Tank. Therefor, there are significant risks and costs associated with the water contamination. MTBE is far more water soluble than gasoline hydrocarbon. The purpose of the this study is to test the ability of ground tire with facultative bacteria. Bacillus brevis, to sorb MTBE. The process is consisted both batch and column experiment to determine the sorption capacity. And Biofilm is observed by SEM in the column. Finally, it is clear that ground tire represent an attractive and relatively inexpensive sorption medium for a MTBE. The authors can surmise that to determine the economic cost of ground tire utilization, tile cost to sorb a given mass of contaminant by ground tire will have to be compared to currently accepted sorption media. and Bacillus brevis strain was eliminated on MTBE, too. The biobarrier that ground tire with bacteria, has potential for use in the remediation of MTBE-contaminated environments.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.368-371
• /
• 2003

Accidental release of petroleum products from underground storage tank(USTs) is one of the most common causes of groundwater contamination. BTEX is the major components of fuel oils, which are hazardous substances regulated by many nations. In addition to BTEX, other gasoline consituents such as MTBE(methyl-t-buthyl ether), anphthalene are also toxic to humans. Natual attenuation processes include physic, chemical, and biological trasformation. Aerobic and anaerobic biodegradation are believed to be the major processes that account for both containment of the petroleum-hydrocarbon plum and reduction of the contaminant concentrations. Aerobic bioremediation has been highly effective in the remediation of many fuel releases. However, Bioremediation of aromatic hydrocarbons in groundwater and sediments is ofen limited by the inability to provide sufficient oxygen to the contaminated zones due to the low water solubility of oxygen. Anaerobic processes refer to a variety of biodegradation mechanisms that use nitrate, ferric iron, sulfate, and carbon dioxide as terminal electron accepters. The objectives of this study was to conduct laboratory-scale microcosm studies in assessing enhanced bioremediation potential of BTEX and MTBE under various electron accepters(aerobic, nitrate, ferric iron, sulfate) in contaminated Soil. these results suggest that, presents evidence and a variety pattern of the biological removal of aromatic compounds under enhanced nitrate-, Fe(III)-, sulfate-reducing conditions.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.328-333
• /
• 1996

Boric acid concentrations of the refueling water storage tank (RWST) and the accumulators for Ulchin 1&2 (UCN 1&2) are increased to meet the post loss of coolant accident (post-LOCA) shutdown requirement for the extended fuel cycles from 12 months to 18 months. To maintain long term cooling (LTC) capability following a LOCA, the switchover tine is examined using BORON code to prevent the boron precipitation in the reactor core with the increased boron concentrations. The analysis results show that, at 8 hours after the initiation of LOCA. the emergency core noting system (ECCS) should be manually realigned to the simultaneous recirculation mode from the cold leg recirculation mode.

• 대한설비공학회지:설비저널
• /
• 제15권3호
• /
• pp.292-298
• /
• 1986

The new f-chart capable of estimating long-term thermal performance of solar space and water heating systems was developed. The system comprise a flat plate solar collector, heat exchanger, storage tank filled with water, auxiliary fuel fired heater, and a house structure. The information obtained from many simulations of solar heating systems has been used to develop this f-chart. Actual hourly meteorological data collected in Seoul, Daejeon, Kwangju and Daegu, Korea from 1979 to 1983 have been utilized in these simulations. The new f-equation is as follows: $$f=1.034Y_{-}0.0968X_{-}0.2235Y^2+0.0043X^2+0.0144Y^3$$. The system performance estimates obtained from the developed f-chart are in close agreement with the results of experiment.

• 한국융합학회논문지
• /
• 제7권6호
• /
• pp.13-21
• /
• 2016

본 논문은 현재 진행 중인 대한민국 남부지역에 위치한 대학 내 스마트에너지캠퍼스 마이크로그리드에서 대학 내 빌딩에 설치될 수소전기분해 이용 연료전지 시스템 운용을 위한 선행 연구로써 고분자전해질막 전기분해(PEMWE)과 고분자전해질막 연료전지(PEMFC) 장치에서 동시에 온도변화 효과를 연구하고자 한다. 전반적으로 실험실에서 50W 고분자전해질막 연료전지(PEMFC)을 사용하여 수행하였다. 모니터링 프로세스는 무선 로라 노드와 게이트웨이 네트워크를 구성하여 실행하였다. 그리고 PEMWE와 PEMFC에 대한 수학적 모델링과 운전 알고리즘을 제안하였으며 제안한 모델에서 PEMWE는 낮은 발열 기준에서 효율이 더 높음을, 반면에 PEMFC는 높은 발열기준에서 효율이 더 높음을 을 알 수 있었다. 향후 대학 구내 빌딩에 설치될 실증시스템 성능을 높이기 위해 PEMWE와 PEMFC의 온도와 압력을 모니터링, 통신 및 제어 등 연구개발을 통하여 구현할 예정이다.