• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.133-134
• /
• 2014

The full transport equation approach for laminar non-premixed flame with detailed chemistry, soot and radiation has an advantage in accuracy and describing for emission pathway, but this approach requires the excessive computational cost especially for a higher-order hydrocarbon fuel flames. On the other hand, the standard flamelet model has an efficiency and accuracy for non-premixed flame, though this model is not suitable for simulating slow processor like soot and radiation in laminar non-premixed flame situation. To overcome this limitation, modified transient flamelet model is developed which coupled with two-equation soot model involved in soot formation and evolution mechanism such as nucleation, surface growth, oxidation and agglomeration.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.71-79
• /
• 2010

One of methods that accomplish fuel-efficient vehicle is to reduce the overall vehicle weight by using aluminum structure typically for cross members, rails and panels in body and chassis. For aluminum structures, the use of Self Piercing Rivet(SPR) is a relatively new joining technique in automotive manufacture. To predict SPR fatigue life, fatigue behavior of SPR connections needs to be investigated experimentally and numerically. Tests and simulations on lap-shear specimen with various material combinations are performed to obtain the joining strength and the fatigue life of SPR connections. A Finite element model of the SPR specimen is developed by using a FEMFAT SPR pre-processor. The fatigue lives of SPR specimens with the curvature are predicted using a FEMFAT 4.4e based on the liner finite element analysis.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.189-191
• /
• 2007

본 연구에서는 고분자전해질연료전지(PEFC)를 이용하여 보조전 원용으로 사용할 수 있는 계통연계 연료전지 시스템을 개발하였다. 또한 본 연구에서 DSP(Digital Signal Processor)를 이용한 계통연계형 전력변환장치(PCS, Power Conditioning System)와 시스템 제어기의 개발도 병행하여 수행되었다. 개발된 1kW급 보조전원용 연료전지 시스템은 다양한 조건에서의 스택 성능 실험 및 BOP 연계 시험을 통해 최적의 운전점을 도출할 수 있었으며, PID(Proportional, Integral, Differential) 운전제어 방식을 통하여 시스템의 안정적인 운전 특성을 확보하였다. 향후 본 시스템은 계통연계용은 물론 독립전원용으로도 사용이 가능할 수 있도록 전력변환장치를 설계하여 적용할 예정이다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.978-979
• /
• 2008

본 논문에서는 TMS320F2812를 이용하여 연료 전지 BOP(Balance of Plant) 내장 터보 블로어로 쓰이는 영구자석 동기전동기의 센서리스 공간 벡터 제어를 구현하였다. 고속으로 회전하는 회전자의 위치 및 속도는 측정하기가 어려우므로, 전류를 이용하여 위상 및 속도를 추정하였으며, 이 알고리즘을 Digital Signal Processor(DSP) 상에서 구현하였다. 전류 측정시 노이즈에 의한 영향을 최소화하기 위해 외부에 12bit급 AD컨버터인 AD7891을 장착하였다. 데드타임 보상 및 dc-link 전압 리플 보상을 적용하였고, 정격 속도 100,000rpm에서 영구자석 동기전동기를 구동하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.278-282
• /
• 2012

Photovoltaic systems have emerged to be one of the cleanest energy systems. Therefore, many large scale solar parks and PV farms have been built to prepare for the post fossil fuel ages. However, due to their large scale, to efficiently manage and operate PV systems, they need to be visually monitored within the range of infrared ray through the Internet. To satisfy this need, the efficient implementation of a high performance video compression standard is required. This paper therefore presents an implementation of H.264 motion estimation, which is one of the most data-intensive and complicated functions in H.264. To achieve this, this work implements vector instructions in hardware and incorporates them in a generic RISC processor architecture, thus increasing the processing speed while minimizing hardware and software design efforts. Extensive simulation results show that this proposed implementation can process motion estimations up to 13 times faster.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.40-45
• /
• 1983

The paper describes an experimental investigation of axisymmetric diesel spray and flame which is held in rapid compression machine (RCM) with electromagnetic single injection nozzle. The axisymmetric diesel spray and flame are taken with high speed photograph and analysis it with image processor. The data presented include fuel concentration of spray, flame temperature, soot concentration of flame in axial and radial direction at a moment and compared it with each other.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.115-122
• /
• 1998

For digital engine control timings, such as ignition, are based on the crank shaft angle. Therefore, it is very important that the angle of the crank shaft can be detected with accuracy for optimal ignition timing. Sequential multi-point injection(MPI) systems that have independent injection events for each cylinder, are used to inject an accurate quantity of fuel, and to cope with varying engine status promptly. In this study the distributorless ignition timing. A crankshaft position sensor has been installed such that it generates a number of pulses per crankshaft revolution to permit accurate detection of the crank shaft angle. An event detecting algorithm has been developed, which detects the crank shaft pulses generated by the position sensor, and the software outputs the required control signals at given crank angle values. We clarified that the hardware method is the best way to increase the performance of the control system, because the event detecting duration T(1+2)max becomes zero.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.389-403
• /
• 2019

Large amounts of concrete waste are likely to arise from the decommissioning of a Kori-1 nuclear power plant. Several studies have been conducted on decommissioning concrete waste in recent decades, however, they have been limited to contaminated concrete issues or were small pilot-scale experiments. This study constructed two industrial-scale models of on-site concrete waste management for clean as well as contaminated concrete. To evaluate the performance of both the models, simulations were conducted using the Flexsim software. The concrete particle size distribution of Kori-1 and concrete processor properties based on widely used construction equipment were used as sources of input data for the simulations. It was observed that it may take over two years to complete the on-site concrete management processes owing to the performance of existing processors. In addition, it was demonstrated that it is essential to identify bottlenecks in the system and enhance the performance of the relevant processors to avoid delays of the decommissioning schedule. Our results suggest that this novel approach can contribute to developing schedules or expediting delayed activities in the Kori-1 decommissioning project.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.336-339
• /
• 2009

In this paper, such as battery power or solar energy and fuel cells generated from Renewable energy sources, high voltage to low voltage DC-DC Converter for converting the design of the study. System consists of low voltage ($24{\sim}28$ [VDC]) and Boosts the voltage (270 [VDC]) for a 3 [kW] DC-DC converter and control circuit is configured as, Power switch the ST Tomson's Automotive low voltage high current MOSFET switches STE250NS10S (temperature 250A) was applied to the two parallel. Also, Controller's processor used ATMEGA128, and Gate Drive applies and composed Photo Coupler TLP250. development. Input voltage (24V) and output voltage (270V) for Conversion in the H-bridge converter topology of the circuit output side power and voltage to control the implementation of the Phase shift angle control applied. And, 3kW of power to pass appropriate specification of the secondary side as interpreted by the high frequency transformer, and the experimental production and analysis of the experiment