• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.357-362
• /
• 2010

The joint transform correlator (JTC) has been the best known technique for pattern recognition and identification. This paper proposes a new technique of fringe adjustment by adopting a sinusoidal amplitude-modulated iterative filter convolved with an interference fringe pattern in the joint power spectrum (JPS) domain. The comparison of our new technique and other techniques is presented to show that the newly proposed technique can successfully improve both the correlation peaks and the peak signal-to-noise ratio (PSNR). Simulated results of enhanced interference fringes are also presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.529-533
• /
• 1994

Atrains in microstain range are measured accurately by means of holographic interometric technique. Holographic fringes of the cantilever beam subjected to out-of-plane deflection and in-plane deflection respectively are obtained experimentally. Form these fringe patterns, 3rd order polynomial of displacements is induced using polynomial regression method. And strain stress distribution could be determined from the secound derivative of this polynomial. These results agree well with FEM.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 한국방송공학회 2015년도 추계학술대회
• /
• pp.182-184
• /
• 2015

We have developed a novel LED display architecture with RGGB 4sub-pixels rendering. LED light control filter algorithm is proposed in order to reduce color fringes by sub-pixel rendering which is a method of perceptual enhancement. The results show that it has 2 times higher perceptual resolution without artifacts.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1073-1075
• /
• 2003

We apply the radar interferometry technique to JERS-1 SAR data sets for detection of slow surface deformation occurred in Mt. Baekdu for a 6-year period (from 1992 to 1998). A series of interferograms has been constructed, and they indicated slow uplift deformation around the volcano. However, it is not conclusive because most interferometric fringes correlate with topographic elevation. It is necessary to remove trophospheric effects in the future works.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제27권1호
• /
• pp.15-22
• /
• 2007

A hybrid experimental-numerical method is presented for determining the stresses around a circular hole in a finite-width, tensile loaded plate. Measured fringe orders along straight lines provided the input information on the external boundary of the hybrid element. In order to see the effects of varying stress field, different numbers of terms in a power-series representation of the complex type conformal mapping stress function were tested. For qualitative comparison, actual isochromatic fringes were compared with reconstructed theoretical fringes using stress-optic law. For quantitative comparison, relative errors and standard deviations with respective to relative errors were analyzed for all measured points by changing the number of terms of stress function. The hybrid results are highly comparable with those predicted by FEA. The results show that this approach is effective and promising because isochromatic data along the straight lines in photoelasticity can be conveniently measured by use of phase shifting photoelasticity.

• Applied Microscopy
• /
• 제25권3호
• /
• pp.75-81
• /
• 1995

The microstructural characterization of ternary $ZnS_{x}Se_{1-x}$(x=0.085) on GaAs(001) substrate grown up to $2{\mu}m\;at\;300^{\circ}C$ by molecular beam epitaxy(MBE) which has a single growth chamber was investigated by high resolution transmission electron microscope (HRTEM) working at 300 kV with point resolution of 0.18nm. The interface in the ZnSSe/GaAs specimen maintains a pseudomorphism with the substrate, but the epilayer has high density of stacking faults and moire fringes. The pits which had formed along <111> direction were found at the interface of ZnSSe/GaAs. The pits were responsible for producing defects in both epilayer and substrate. The wavy interface which has the difference of 15nm in height was found to maintain the pseudomorphism with the substrate and no stacking faults were found around the interface. However there exists faint and fine moire fringes in the epilayer near interface.

• Korean Journal of Optics and Photonics
• /
• 제27권2호
• /
• pp.67-72
• /
• 2016

In projection moire topography, the investigation of fringe sensitivity, which means the change rate of fringe order according to object height, is important and necessary to reduce the measurement error of the shape of an object. Using the fringe sensitivity, the determination of the absolute orders of moire fringes can be performed very easily and rapidly. The important parameters in the determination of absolute orders of fringes are the positions of light source and object, and the grating period in projection moire topography. Among these parameters, the fringe sensitivity due to the transverse motion of the light source and the longitudinal motion of the object according to grating periods are analyzed and compared. As a result, whereas the fringe sensitivity in the transverse-motion method increases linearly and gradually as the distance between light source and imaging sensor increases, the fringe sensitivity due to the longitudinal-motion method decreases dramatically as the distance between imaging lens and object increases. In these methods, the fringe sensitivity and its change increase as the grating period increases.

• Spatial Information Research
• /
• 제19권6호
• /
• pp.75-86
• /
• 2011

This paper proposes a modified way to delimit the boundary of Busan metropolitan area and compares the empirical analysis with the existing metropolitan area boundary. More specifically, the present state of the metropolitan transportation network is reflected by service area analysis in our study area. The analysis of the linkage between the central city and its fringes considers various travel behaviors as well as commuting to work and school, based on origin-destination trip information. In addition, more diverse indices are applied to the analysis of urban characteristics, and the land cover map is used as well. Compared with the current Busan metropolitan area boundary, our empirical analysis captures the status quo of the undergoing spatial dynamics such as the newly form ed homogeneous sphere of living in our study area.

• Korean Journal of Optics and Photonics
• /
• 제24권6호
• /
• pp.318-323
• /
• 2013

Digital holographic microscopy allows optical path difference measurement. Optical path difference depends on both the refractive index and the morphology of the sample. When interference fringes are very closely spaced, the phase data contain high frequencies where $2{\pi}$ ambiguities cannot be resolved. The immersion testing method, which is a transmission test while the sample is immersed in liquid, is very effective in reducing high frequency fringes in transmission measurements so that large dynamic range testing is possible for a non-null configuration. We developed a digital holographic microscope using liquid that can measure the high numerical aperture aspheric morphology of a sample. This system provides highly precise three-dimensional information on the sample. By improving the experimental method, choosing liquids which have similar refractive index to the sample, we can measure more accurate three-dimensional information on the samples.

• Korean Journal of Oriental Medicine
• /
• 제1권1호
• /
• pp.273-287
• /
• 1995

Moire topography, a simple technique for three-dimensional quantitation, was used to provide interference fringe photographs of the human back with sufficient accuracy to be used for detecting patient with asymmetry due to scoliosis, the disease of cervix and lumbar, muscle dysfunction. Contour lines are a suitable and widely accepted method of describing a three-dimensional surface. In the moire technique, contour lines of an object are produced as interference fringes while the object is illuminated by a spotlight through a special grating. The fringe pattern is produced by the interference of the grating and its shadow on the object. A photograph of a moire pattern on the human back will permit an assessment of the overall body shape and the symmetry of the back. This study uses shadow moire topography. Moire topography provides a non-invasive technique for quantifying the shape of the human body. In the use of moire topography for the Oriental Medicine Diagnosis, the strength of moire lies in the ablility to detect change due to deformity of human body.