• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.109-119
• /
• 2019

The purpose of this study is to examine fashion trends and the direction of the four fashion collections by analyzing the design key-words of the four major international fashion collections in 2018. The data of this study was collected by extracting the key-words from Marie Claire Korea in 2018, with the total of the collected data numbering 2,144. The data was analyzed by text mining using the R program and word-cloud, and a co-occurrence network analysis was conducted. The results of this study are as follows: First, the key-words of fashion collection designs in 2018 were fringe and ruffle detail, silk and denim fabric, vivid color, stripe and check pattern, pants suit item, and oversized silhouette, focusing on romanticism and sport. Second, seasonal characteristics of the fashion collections were pastel colors in S/S, primary and vivid colors in F/W. Details were embroidery and cutouts in S/S, patchwork and fringe in F/W. Third, the design trends of the four major fashion collections were presented in the Paris collection: stripes, check patterns, embroidery, lace, tailoring, draping, romanticism, and glamor. In the Milan collection, checks, prints, denim, and minidresses reflected sport and romanticism. The London collection included fringe, ruffles, floral patterns, flower patterns, and romanticism. The New York collections included vivid colors, neon colors, pastel colors, oversize silhouettes, bodysuits, and long dresses.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.40-49
• /
• 1995

This paper presents the performance and problems in analysis method and testing system of Electronic Speckle Pattern Interferometry (ESPI) method, in measuring two - dimensional in-plane displacement. The anyalysis result of measurement by ESPE is quite comparable to that tof measurement by strain gauge method. This implies that the method of ESPE is a very effective tool in non-contact two-dimensional in-plane strain analysis. But there is a controversal point, measurment error. This error is discussed to be affected not by ESPE method itself, but by its analysis scheme of the interference fringe, where the first-order interpolation has been applied to the points of strain measured. In this case, it is turned out that the more errors would be occurred in the large interval of fringe. And so this paper describes a computer method for drawing when the height is available only for some arbitrary collection of points. The method is based on a distance-weighted, last- squares approximation technique with the weight varying with the distance of the data points.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.237-248
• /
• 1998

Landcover has been largely influenced by human activities, especially in recent days. The analysis of the change of land use by urbanized development is useful for determining development plan hereafter. This study aimed to the quantitative analysis about the urban sprawl within 12 years from 1985 to 1996, at Chonan, and for extracting the characteristics of change. For this purpose, this study performed land cover classifications using Landsat TM data . A hybrid classification method was used to classify satellite images into seven types of land cover. Road network digitied from 1:25,000 topographic map was rasterized and overlaid on the landcover map. A result of this study showed that area of forest and paddy decreased due to urban sprawl. Especially from 1993 to 1996, the change of land use progressed rapidly because of merging a city and a country in Chonan. The size of patch in forest had been smaller and irregular form. It is a general progress that size of patch in forest had been smaller and irregular form. It is a general progress that the forest have changed the paddy and bare land paddy and bare land have changed low-density urban or high-density urban. This explained how urbanized Chonan was and applied the suggeston of plan in landuse with the result of this study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.162-162
• /
• 2009

Optical bounce which occurs by over twist of the liquid crystal (LC) director has a problem of response time in fringe-field switching (FFS) modes. After removing the electric field, effective birefringence ($d{\Delta}n_{eff}$) at the edge of pixel electrode meets the $\lambda/2$ phase instantly, since tilt angle of LC directors at that position suddenly decreases compared to twist angle. In this paper, based on the careful analysis, origin of optical bounce has been explained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1266-1269
• /
• 2004

This study focuses on the color characteristics of FFS (Fringe Field Switching). We use various methods to prove the high performance of color characteristics in the Fringe Field Switching mode. We have described a color performance of 15" XGA product by the viewing angle range using x, y parameters of CIE chromaticity diagram. And so we used the 2 dimensional analyzing to prove the color shift distribution by viewing angle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04a
• /
• pp.63-64
• /
• 2009

Optical bounce during switching in the fringe field switching (FFS) mode using a liquid crystal (LC) with positive dielectric anisotropy has been observed. According to the analysis, it occurs at two positions which are center and edge of the pixel electrode, which decreases decaying response time. The former is major and mainly associated with increase in twist angle instantaneously during switching off resulted from decrease in tilt angle near by LC molecules at center. This paper discusses the origin of such optical bounces.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.564-574
• /
• 1996

This paper describes as Electronic Speckle Pattern Interferometry system which has been designed for measuring vibration patterns and quantitative measurement of vibration amplitude fields by using the time average method on a object. Visbility of fringe patterns is more improved by using the phase stepping and frame average method to reduce speckle and electric noise. And a bias vibration is introduced into the reference beam to shift the $\frac{2}{0}$ fringes so that fringe shift algorithms can be used to determine vibration amplitude. The experimental results are compared to those of the FFT analyzer and the FEM model analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1810-1821
• /
• 1995

Photoelastic experiment has been used to analyze stress of structure and stress in the vicinity of crack tip etc.. Model experiment such as photoelastic experiment has been restricted by problem of residual stress in the photoelastic model material. They are generated by molding, cutting and time effects etc.. They produce some errors in the results of photoelastic experiment data. In this paper, stress optic law considering residual stress already developed by authors was applied to the stress concentration problem and fracture mechanics. Although the specimen was bad with residual stress, we could obtain good results by using the stress optic law considering residual stress. It was found that the stress optic law of photoelastic experiment could be applied to the stress analysis of bimaterial.

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.10-15
• /
• 2011

In this paper, we propose an auto-focusing algorithm which extracts a depth parameter by analyzing a selected part of a hologram, and we use experimental results to show that the algorithm is practical. First, we record a complex hologram using Optical Scanning Holography. Next we select some part of hologram and extract depth information through Gaussian low pass filtering, synthesizing a real-only hologram, power fringe-adjusted filtering and inverting to a new frequency axis. Finally, we reconstruct the hologram automatically using the extracted depth location.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.2
• /
• pp.130-133
• /
• 2011

A comparative study of two capacitance methods to measure the effective channel length in deep-submicron MOSFETs has been made in detail. Since the reduction of the overlap capacitance in the accumulation region is smaller than the addition of the inner fringe capacitance at zero gate voltage, the capacitance method removing the parasitic capacitance in the accumulation region extracts a more accurate effective channel length than the method removing that at zero gate voltage.