• Research in Plant Disease
• /
• v.21 no.4
• /
• pp.290-296
• /
• 2015

This study was conducted to establish an efficient screening system for resistant tomato to bacterial wilt caused by Ralstonia solanacearum. Under several conditions such as inoculation methods, growth stages of tomato seedlings, inoculum concentrations, and incubating temperatures after inoculation, development of bacterial wilt on nine resistant or susceptible cultivars of tomato was investigated. To inoculate by drenching the non-cut roots with the bacterial suspension was better to distinguish resistance and susceptibility of tomato cultivars than by drenching the cut roots using scalpel. And 'Hawaii7996' a resistant tomato to R. solanacearum showed high resistance at all the tested conditions including growth stages (3-, 6-, 8-, 10-leaf stages), inoculum concentrations ($OD_{600}=0.1-0.4$) and incubation temperatures (25, 30, $35^{\circ}C$). On the other hands, susceptible cultivars represented disease index of 3.7 and 3.9 at 6- and 8-leaf stages, respectively. At 3- and 10-leaf stages, the cultivars demonstrated lower disease severity of 2.1 and 0.5, respectively, than at 6- and 8-leaf stages. When the inoculated seedlings were incubated in growth chambers of 25, 30 and $35^{\circ}C$, disease severity of susceptible cultivars was significantly greater at 30 and $35^{\circ}C$ than at $25^{\circ}C$. In addition, the level of resistance of the tomato cultivars was not significantly affected by inoculum concentrations of $OD_{600}=0.1-0.4$. On the basis of the results, we suggest an efficient screening method to measure resistance level of tomato cultivars to bacterial wilt. The eight-leaf stage seedlings transplanted 7 days before inoculation, are inoculated with R. solanacearum by drenching the non-cut roots with a bacterial suspensions ($OD_{600}=0.4$) to give inoculum volume of 50 ml/soil l. The inoculated plants are incubated in a growth room at $30^{\circ}C$ for 12-13 days with 12-hour light a day.

• Research in Plant Disease
• /
• v.21 no.3
• /
• pp.201-207
• /
• 2015

This study was conducted to establish a simple mass-screening method for resistant melon to Fusarium wilt caused by Fusarium oxysporum f. sp. melonis (FOM). Root-dipping inoculation method has been used to investigate resistance of melon plants to Fusarium wilt. However, the inoculation method requires a lot of labor and time because of complicate procedure. To develop a simple screening method on melon Fusarium wilt, occurrence of Fusarium wilt on susceptible and resistant cultivars of melon according to inoculation method including root-dipping, soil-drenching, tip, and scalpel methods was investigated. Scalpel and tip methods showed more clear resistant and susceptible responses in the melon cultivars than root-dipping inoculation method, but tip method represented slightly variable disease severity. In contrast, in the case of soil-drenching inoculation method, disease severity of the susceptible cultivars was very low. Thus we selected scalpel method as inoculation method of a simple screening method for melon Fusarium wilt. By using the scalpel inoculation method, resistance degrees of the cultivars according to incubation temperature after inoculation (25 and $30^{\circ}C$) and inoculum concentration ($1{\times}10^6$ and $1{\times}10^7conidia/ml$) were measured. The resistance or susceptibility of the cultivars was hardly affected by all the tested conditions. To look into the effectiveness of scalpel inoculation methods, resistance of 22 commercial melon cultivars to FOM was compare with root-dipping inoculation method. When the melon cultivars were inoculated by scalpel method, resistance responses of all the tested cultivars were clearly distinguished as by root-dipping method. Taken together, we suggest that an efficient simple mass-screening method for resistant melon plant to Fusarium wilt is to sow the seeds of melon in a pot (70 ml of soil) and to grow the seedlings in a greenhouse ($25{\pm}5^{\circ}C$) for 7 days, to cut the root of seedlings with a scalpel and then pour a 10 ml-aliquot of the spore suspension of $1{\times}10^6conidia/ml$ on soil. The infected plants were cultivated in a growth room at 25 to $30^{\circ}C$ for about 3 weeks with 12-hr light a day.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.34-45
• /
• 2016

Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.

• Advances in materials Research
• /
• v.2 no.1
• /
• pp.65-75
• /
• 2013

Heterogeneous photocatalysis is a rapidly developing field in environmental engineering. It has a great potential to cope with the increasing pollution in the air. The addition of a photocatalyst to ordinary building materials such as tiles, concrete, paints, creates environmental friendly materials by which air pollution or pollution of the surface itself can be controlled and diminished. This work reports the results of the laboratory research, especially carried out towards air purifying action and self-cleaning measurements. In particular the research was focused on the study of the photocatalytic behavior of industrially prepared tiles produced starting from commercial micro-sized $TiO_2$. Air purification action has been investigated through NOx degradation tests. On the contrary, the degradation of pollution at the surface, also called as self-cleaning action, is verified by the degradation of two different organic dyes: Rhodamine B (red color) and Metanil yellow (yellow).

• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.249-256
• /
• 2017

The history of polyurethane is relatively shorter compared to that of the other polymers, though its importance has grown rapidly. Due to its unique properties, polyurethanes are widely applied in various fields. In particular, the automotive industry is one of the important application fields. To date, polyols and isocyanates used in the polyurethane industry are generally of petrochemical origin. Recently, owing to the oil crisis, legislation, and growing awareness towards environmental preservation, the demand for more sustainable and eco-friendly raw materials has increased. In this paper, the latest research and development trends in polyurethane applications were reviewed, with a focus on the automobile industry in areas such as seat comfort, noise reduction, light weight, biomass-based polyurethane, and recycling.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1370-1376
• /
• 2010

In this study, usability and stability in the caisson filling material were reviewed that copper salg(one million tons per one-year) were produced by smelter. In order to complete these studies, chemical and physical comparing analyses were performed by sea-sand materials as to the materials suitability, After construction, the structural displacement of caisson was measured by the instrument and was examined for stability. As a result of analysis, it was determined that copper slag is eco-friendly, and can be used as recycled alternative to aggregates materials.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.676-686
• /
• 2010

Damage Cases of variously type are reported that the ground subsidence is caused by the underground cavities at structure and construction works in lime stone or abandoned zone. A underground cavities by direct for zone having an effect on structure have been filled with cement agents. But this measure is urgently needed in materials and work methods, because ground water pollution at water down fillings and flow out, ground disturb at high participle, damage of farms and fishery. The research confirm application of filling method and filling materials of environmentally friendly and economical by Hi-FA new materials have both liquidity and viscosity from case reinforcement in APT site, Gunsan.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.3 s.76
• /
• pp.58-64
• /
• 2007

New artificial fishing reefs are developed using modified sulfur concrete. Modified sulfur concrete, which is made of by-product aggregates and modified sulfur binder, has good properties, including high density, less water absorption, high strength, high salt resistance, and good affinity for living organisms. This paper shows the mechanical properties of modified sulfur concrete and its field tests under the sea. We have found that the pH-neutral materials attach microalgae and seaweed more readily, compared to the pH-high materials.

• East Asian mathematical journal
• /
• v.26 no.2
• /
• pp.115-140
• /
• 2010

The purpose of this paper was to develop manipulative materials to teach the angle concepts and construct a teaching-learning program by using that. Furthermore, this study analyzed how does the program affect students understanding of the angle concepts. To check the effects of learning activities with manipulative materials on the understanding of an angle concepts, applied observation during class and write a mathematics journal writing, a description of students impressions at the end of the class and analyzed before and after test paper. We find that students approached the subject more friendly and knew well about the mathematical concepts by using materials. Furthermore, this activity helped that way to solve add and subtract of the angle, estimate ability, round angle concept, positive response in mathematics learning.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.63-64
• /
• 2019

Due to the rapid deterioration of the domestic atmosphere, people are suffering from inconveniences such as wearing fine dust masks all the time during outdoor activities. In this study, light transmitting concrete, LEFC(Light Emotion Friendly Concrete), using TiO2 photocatalyst was produced. Since the characteristics of LEFC where acrylic rods are inserted require self-consolidating performance, the purpose was to utilize UHPC(Ultra High Performance Concrete) materials to obtain high-flowability. Further, the compressive strength and flexural strength were evaluated to prevent the reduction of epidemiological performance by utilizing UHPC materials. As such, a basic study was carried out to develop LEFC materials using photocatalyst that can purify the air and stimulate human sensibility.