• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1229-1232
• /
• 2003

In this paper, The High-speed Low-power Analog-to-Digital Convener Archecture is proposed using the parallel S/H for High-speed operation. This technique can significantly reduce the sampling frequency per S/H channel. The Analog-to-Digital Converter is designed using 0.35${\mu}{\textrm}{m}$ CMOS technology. The simulation result show that the proposed Analog-to-Digital Converter can be operated at 40Ms/s with 8-bit resolution and INL/DNL errors are +0.4LSB~-0.6LSB / +0.9LSB~-1.4LSB , respectively.

• ETRI Journal
• /
• 제26권6호
• /
• pp.555-559
• /
• 2004

We propose an efficient digital IF down converter architecture for dual-mode WCDMA/cdma2000 based on the concept of software defined radio. Multi-rate digital filters and fractional frequency conversion techniques are adopted to implement the front end of a dual-mode receiver for WCDMA and cdma2000. A sub-sampled digital IF stage was proposed to support both WCDMA and cdma2000 while lowering the sampling frequency. Use of a CIC filter and ISOP filter combined with proper arrangement of multi-rate filters and common filter blocks resulted in optimized hardware implementation of the front end block in 292k logic gates.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.667-670
• /
• 2004

In this paper, we have presented the improved IF transceiver architecture and the implementation and experimental results on re-configurable transceiver based on digital IF for multiple wideband OFDM/TDD base stations for high-speed portable internet-service in which is issued Korea. The implemented IF transceiver has been designed to support multiple frequency allocations and multiple standards by only modifying the programmable software not its hardware like as the software-defined-radio concept. Also, the digital complex quadrature modulation technique has been used for the digital IF transmitter, which is able to combine multiple frequency bands in digital processing block not RF block and to reject the image frequency signals. And the bandpass sampling technique has been used for the digital IF receiver to reduce the sampling rate of ADC. This paper has shown the experiment results on the frequency response and constellation on the base-station implemented using the modified IEEE 802.16a/e physical layer channel structure based on OFDM/TDD.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.961-965
• /
• 2006

본 논문에서는 Digital IF(Intermediate Frequency) 기술을 이용한 Up/Down 변환기를 설계하고, 이에 대한 성능을 평가하였다. Digital IF 기술을 사용하는 이유는 passive 소자로 구성되어진 IF주파수 영역은 고정되어진 한 주파수 밖에 사용하지 못하지만, Digital IF로 구성되어지면 보드의 외형적인 변경 없이 다양한 통신 주파수 영역에서 유연성 있게 사용이 가능하게 된다. 이러한 구성은 기존의 아날로그 헤테로다인 방식에 비하여 높은 유연성을 가지며, 우수한 성능향상을 보여준다.

• 정보학연구
• /
• 제9권1호
• /
• pp.33-39
• /
• 2006

This study is for the contents of development to the hardware system and software driving algorithm to implement the frequency band of about 7KHz los pass digital filter which has the cut-off frequency of 392Hz by interfacing of a microprocessor with its peripheral analog-to-digital converter chip and digital-to-analog converter chip. The simplicity of digital filter design without difficulty and the implementation of programmed digital filter can be realized by providing the interfacing method to implement the law pass digital filter for the biological signals and the realization method of computer algorithm by a microprocessor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.45-48
• /
• 2000

By the use of he DSP and microprocessor controller many high power converter such as especially inverter and motor drive system may be enhanced resulting in the improved robustness of EMI the ability to communicate the operating conditions and the ease of adjusting the control parameters. However the digital controller using DSP or microprocessor has not been applied in the high frequency switching power supplies especially in full bridge dc/dc converters. this paper presents a promising solution to the dc bias control problem of high frequency transformer in high power full bridge converter.

• 센서학회지
• /
• 제28권4호
• /
• pp.240-245
• /
• 2019

Phase interpolation is widely adopted in frequency synthesizers and clock-and-data recovery systems to produce an intermediate phase from two existing phases. The intermediate phase is typically generated by combining two input phases with different weights. Unfortunately, this results in non-uniform phase steps. Alternatively, the intermediate phase can be generated by successive approximation, where the interpolated phase at each approximation stage is obtained using the same weight for the two intermediate phases. As a proof of concept, this study presents a 2-GHz 8-bit successive approximation digital-to-phase converter that is designed using 65-nm CMOS technology. The converter receives an 8-phase clock signal as input, and the most significant bit (MSB) section selects four phases to create two sinusoidal waveforms using a harmonic rejection filter. The remaining least significant bit (LSB) section applies the successive approximation to generate the required intermediate phase. Monte-Carlo simulations show that the proposed converter exhibits 0.46-LSB integral nonlinearity and 0.31-LSB differential nonlinearity with a power consumption of 3.12 mW from a 1.2-V supply voltage.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.694-701
• /
• 2018

This paper proposes a new single-phase power converter topology for changing the frequency of AC voltage. The proposed single-phase frequency converter (SFC) includes a T-type multi-level power converter (TMPC), a frequency decoupling transformer (FDT) and a digital signal processor (DSP). The TMPC can convert a 60 Hz AC voltage to a DC voltage and then convert the DC voltage to a 50 Hz AC voltage. Therefore, the output currents of the two T-type power switch arms have 50 Hz and 60 Hz components. The FDT is used to decouple the 50 Hz and 60 Hz components. The salient feature of the proposed SFC is that only one power electronic converter stage is used since the functions of the AC-DC and DC-AC power conversions are integrated into the TMPC. Therefore, the proposed SFC can simplify both the power circuit and the control circuit. In order to verify the functions of the proposed SFC, a hardware prototype is established. Experimental results verify that the performance of the proposed SFC is as expected.

• 한국정보통신학회논문지
• /
• 제14권12호
• /
• pp.2628-2635
• /
• 2010

본 논문에서는 차량용 FMCW(Frequency Modulated Continuous Wave) 레이더의 도플러 주파수와 아날로그-디지털 변환기 비트 수에 따른 탐지 성능 분석 및 신호처리부 개발을 진행하고자 한다. 성능 평가를 위한 FMCW 레이더의 시스템 모델은 송신부와 수신부로 구성되어 있으며 채널은 가우시안 잡음 환경을 사용한다. 이론과 시뮬레이션을 통해서 시스템 모델을 검증한다. 수신부에서는 수신 신호와 기준 신호사이의 부정합으로 인한 주파수 오차가 발생하게 된다. 75cm의 분해능를 갖는 FMCW 레이더에서 도플러 주파수가 약 38KHz이하인 경우 탐지 성능의 열화가 발생하지 않음을 알 수 있다. 아날로그-디지털 변환기 비트에 따른 탐지 성능은 6비트가 최소의 비트로 결정될 수 있음을 알 수 있다. 그리고 FPGA를 이용하여 디지털 송신 파형 발생기를 위한 집적 디지털 신디사이저(Direct Digital Synthesis) 칩을 기반한 FMCW 레이더 신호처리부를 설계 및 구현을 진행한다.

• 한국정보통신학회논문지
• /
• 제18권1호
• /
• pp.129-134
• /
• 2014

본 논문은 디지털-아날로그 변환기(DAC: digital-to-analog converter), SAR 로직, 그리고 비교기로 구성된 10-bit 10-MS/s 비동기 축차근사형(SAR: successive approximation register) 아날로그-디지털 변환기(ADC: analog-to-digital converter)를 제안한다. Rail-to-rail의 입력 범위를 가지는 설계된 비동기 축차근사형 아날로그-디지털 변환기는 샘플링 속도를 향상시키기 위해 MOM(metal-oxide-metal) 커패시터를 이용한 바이너리 가중치 기반의 디지털-아날로그 변환기를 사용하여 구현한다. 제안하는 10-bit 10-MS/s 비동기 축차근사형 아날로그-디지털 변환기는 0.18-${\mu}m$ CMOS 공정에서 제작되고 면적은 $0.103mm^2$를 차지한다. 1.1 V의 공급전압에서 전력소모는 0.37 mW를 나타낸다. 101.12 kHz와 5.12 MHz의 아날로그 입력 신호에 대해 측정된 SNDR은 각각 54.19 dB와 51.59 dB이다.