• 제목/요약/키워드: frequency-dependent

검색결과 1,819건 처리시간 0.025초

Frequency-dependent C-V Characteristic-based Extraction of Interface Trap Density in Normally-off Gate-recessed AlGaN/GaN Heterojunction Field-effect Transistors

  • Choi, Sungju;Kang, Youngjin;Kim, Jonghwa;Kim, Jungmok;Choi, Sung-Jin;Kim, Dong Myong;Cha, Ho-Young;Kim, Hyungtak;Kim, Dae Hwan
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권5호
    • /
    • pp.497-503
    • /
    • 2015
  • It is essential to acquire an accurate and simple technique for extracting the interface trap density ($D_{it}$) in order to characterize the normally-off gate-recessed AlGaN/GaN hetero field-effect transistors (HFETs) because they can undergo interface trap generation induced by the etch damage in each interfacial layer provoking the degradation of device performance as well as serious instability. Here, the frequency-dependent capacitance-voltage (C-V) method (FDCM) is proposed as a simple and fast technique for extracting $D_{it}$ and demonstrated in normally-off gate-recessed AlGaN/GaN HFETs. The FDCM is found to be not only simpler than the conductance method along with the same precision, but also much useful for a simple C-V model for AlGaN/GaN HFETs because it identifies frequency-independent and bias-dependent capacitance components.

광대역 신호의 주파수 영역 간섭 패턴을 이용한 해저면 음속 추정 연구 (A Study on Estimation of the Sound Speed of Seabed from the Frequency-dependent Interference Pattern of Broadband Signal)

  • 이성욱;한주영;김남수;나정열;박정수
    • 한국음향학회지
    • /
    • 제22권7호
    • /
    • pp.554-561
    • /
    • 2003
  • 음원과 수신기 사이의 거리가 고정된 상태에서 측정한 광대역 천이 신호의 스펙트럼에 나타나는 간섭 패턴으로부터 모드차단 주파수를 인식하고 이로부터 해저면 음속을 추정하기 위해 수치 모의 및 실험 결과 분석을 통해 고찰하였다. Pekeris 도파관 환경에 대한 수치 모의 결과는 주파수 변화에 따른 전달 손실 및 간섭 패턴 변화가 모드 차단 주파수와 밀접한 관련이 있으며 간섭 패턴의 변화로부터 모드 차단 주파수를 인식하는 것이 가능할 수 있음을 보여주었다. 수치 모의를 통해 고찰한 개념을 해상 실험을 통해 획득한 신호에 적용하여 모드 차단 주파수를 인식하고 해저면 음속을 추정하였다. 추정된 음속을 모델 입력 인자로 이용하여 예측한 전달 손실은 손실 수준 린 간섭 패턴에서 실험 결과 분석을 통해 산출한 것과 매우 유사한 결과를 나타내었다.

RF MOSFET의 주파수 종속 입력 저항에 대한 이론적 분석 (Theoretical Analysis of Frequency Dependent Input Resistance in RF MOSFETs)

  • 안자현;이성현
    • 전자공학회논문지
    • /
    • 제54권5호
    • /
    • pp.11-16
    • /
    • 2017
  • RF MOSFET에서 관찰된 입력 저항의 주파수 종속 특성이 단순화된 입력 등가회로로부터 유도된 pole과 zero 주파수 수식을 사용하여 자세히 분석되었다. 이러한 이론적 분석을 사용하여 저주파에서 입력저항의 감소현상이 포화영역에서 소스와 pinch-off 영역 사이의 채널저항으로부터 발생되는 것을 발견하였다. 이와 같이 저주파에서 입력저항이 감소하는 채널 저항 효과는 채널저항을 변화시키면서 소신호 등가회로 모델링을 수행하여 물리적으로 입증되었다.

${\beta}-Endorphin$의 내피세포의존성-세로토닌 유도-근 수축 억제와 저빈도-주파수 은침점전자극의 혈장 ${\beta}-endorphin$ 증가 (Inhibition of Endothelial Cell-dependent Serotonin-induced Contraction of ${\beta}-endorphin$ and Increment of Plasma ${\beta}-endorphin$ of Silver Spike Point Low Frequency Electrical Stimulation)

  • 최영덕;이준희;김중환
    • The Journal of Korean Physical Therapy
    • /
    • 제16권3호
    • /
    • pp.22-31
    • /
    • 2004
  • The purpose of this study was to demonstrate the effects of silver spike point (SSP) low frequency electrical stimulation on plasma ${\beta}-endorphin$ activities measured by radio- immunoassay from normal volunteer and the effects of ${\beta}-endorphin$ on 5-hydroxytryptamine (5-HT, serotonin)-induced contraction investigated by isometric tension methode in rats. The current of 3 Hz continue type, but not 100 Hz continue type, of SSP low frequency electrical stimulation significantly increased in plasma ${\beta}-endorphin$ from normal volunteer. The endothelial cell-dependent 5-HT-induced contractions were inhibited by ${\beta}-endorphin$ $1{\mu}M$. These results suggest that the ${\beta}-endorphin$ regulates nociceptive-like substance, such as 5-HT, in part and that the SSP low frequency electrical stimulation, specifically current of low frequency of 3 Hz continue type, significantly increases plasma ${\beta}-endorphin$ from normal volunteer.

  • PDF

Prewarping법을 이용한 SCF의 주파수 #곡 보상에 관한 연구 (A Study on compensation of Frequency Distortion of SCF by Using Prewarping Procedure)

  • 최민호;김도현
    • 대한전자공학회논문지
    • /
    • 제22권5호
    • /
    • pp.69-74
    • /
    • 1985
  • 본 논문에서는 먼저 Sensitivity가 가장 낮은 LC Ladder 필터로 부터 FDNR frequency dependent negative resists.) 방식을 이용하여 5차 Butterworth 저역 통과 능동 RC필터를 설계하였으며 능동 RC 필터를 SCF(switched capacito, filter)로 변조하는 과정에서 Bilinear Z변환을 이용하였다. Bilinear Z 변환으로 설계된 SCF에서 aliasing 현상은 피할수 있으나 주파수 대곡이 발생한다. 아나로그 필터를 디지틀 릴터로 변환하면 이러한 영향으로 속단 주파수 영역이 일치하지 않으므로 이것을 적게 하기 위하여 Prewarping을 해준다. 그 결과 Prewarping된 SCF는 Bilinear Z 변환된 SCF보다 각파수 이유이 현저하게 개선됨을 확인하였다.

  • PDF

Implementation of DYLAM-3 to Core Uncovery Frequency Estimation in Mid-Loop Operation

  • Kim, Dohyoung;Chang hyun Chung;Moosung Jae
    • Nuclear Engineering and Technology
    • /
    • 제30권6호
    • /
    • pp.531-540
    • /
    • 1998
  • The DYLAM-3 code which overcomes the limitation of event tree/fault tree was applied to LOOP (Loss of Off-site Power) in the mid-loop operation employing HEPs (Human Error Probabilities) supplied by the ASEP (Accident Sequence Evaluation Program) and the SEPLOT (Systematic Evaluation Procedure for Low power/shutdown Operation Task) procedure in this study. Thus the time history of core uncovery frequency during the mid-loop operation was obtained. The sensitivity calculations in the operator's actions to prevent core uncovery under LOOP in the mid-loop operation were carried out. The analysis using the time dependent HEP was performed on the primary feed & bleed which has the most significant effect on core uncovery frequency. As the result, the increment of frequency is shown after 200 minutes duration of simulation conditions. This signifies the possibility of increment in risk after 200 minutes. The primary feed & bleed showed the greatest impact on core uncovery frequency and the recovery of the SCS (Shutdown Cooling System) showed the least impact. Therefore the efforts should be taken on the primary feed & bleed to reduce the core uncovery frequency in the mid-loop operation. And the capability of DYLAM-3 in applying to the time dependent concerns could be demonstrated.

  • PDF

주파수 대역별 잔향시간 추정을 위한 변형된 AWSSDR 방식 (Modified AWSSDR method for frequency-dependent reverberation time estimation)

  • 김민식;김형순
    • 말소리와 음성과학
    • /
    • 제15권4호
    • /
    • pp.91-100
    • /
    • 2023
  • 잔향시간(reverberation time, T60)은 대표적인 음향 매개 변수로서, 잔향에 대한 정보를 제공한다. 동일한 공간이라도 주파수 대역에 따라 잔향이 미치는 영향은 다르기 때문에, 주파수 대역별(frequency-dependent, FD) T60은 음향환경에 대한 세부적인 정보를 제공하여 유용하게 사용될 수 있다. 하지만 음성신호로부터 T60을 추정하는 기존의 블라인드 T60 추정 방식들은 대부분 전 대역 T60 추정에 집중되어 있으며, 소수의 블라인드 FDT60 추정 방식들은 공통적으로 저주파 대역에서 열악한 성능을 보인다. 본 논문은 블라인드 FDT60 추정을 위해, 이전에 제안한 주의 집중 풀링 기반 스펙트럼 감쇠율의 가중 합(Attentive pooling based Weighted Sum of Spectral Decay Rates, AWSSDR) 방식을 변형하여 목표를 전 대역 T60에서 FDT60으로 확장하였다. 본 논문에서 제안한 방식은 ACE challenge의 평가데이터 셋에 대한 성능 평가 결과, 기존의 블라인드 FDT60 추정 방식들보다 우수한 성능을 달성하였으며, 특히, 모든 주파수 대역에서 일관성 있는 우수한 추정 성능을 보였다. 이는, 잔향의 물리적인 특성과 관련된 스펙트럼 감쇠율을 주파수 대역별로 처리하여, 음성신호로부터 FDT60에 대한 정보를 취합하는, AWSSDR 방식의 매커니즘이 주파수에 따라 변하는 잔향의 영향을 반영하여 FDT60 추정에 유용함을 보여준다.

펄스압축기법을 이용한 활어 개체어에 대한 광대역 음향산란신호의 분석 및 식별 (Analysis and Classification of Broadband Acoustic Echoes from Individual Live Fish using the Pulse Compression Technique)

  • 이대재;강희영;곽민선
    • 한국수산과학회지
    • /
    • 제48권2호
    • /
    • pp.207-220
    • /
    • 2015
  • This study identified the species-specific, frequency-dependent characteristics of broadband acoustic scattering that facilitate classifying fish species using the pulse compression (PC) technique. Controlled acoustic scattering laboratory experiments were conducted with nine commercially important fish species using linear chirp signals (95-220 kHz) over an orientation angle range of ${\pm}45^{\circ}$ in the dorsal plane at approximately $1^{\circ}$ increments. The results suggest that the angular-dependent characteristics of the broadband echoes and the frequency-dependent variability in target strength (TS) were useful for inferring the fish species of interest. The scattering patterns in the compressed pulse output were extremely complex due to morphological differences among fish species, but the x-ray images strongly suggested that spatial separation correlated well with scattering for the head, skeleton, bone, otoliths, and swim bladder within each specimen.

Electro-mechanical vibration of nanoshells using consistent size-dependent piezoelectric theory

  • Ebrahimi, Narges;Beni, Yaghoub Tadi
    • Steel and Composite Structures
    • /
    • 제22권6호
    • /
    • pp.1301-1336
    • /
    • 2016
  • In this paper, the free vibrations of a short cylindrical nanotube made of piezoelectric material are studied based on the consistent couple stress theory and using the shear deformable cylindrical theory. This new model has only one length scale parameter and can consider the size effects of nanostructures in nanoscale. To model size effects in nanoscale, and considering the nanotube material which is piezoelectric, the consistent couple stress theory is used. First, using Hamilton's principle, the equations of motion and boundary condition of the piezoelectric cylindrical nanoshell are developed. Afterwards, using Navier approach and extended Kantorovich method (EKM), the governing equations of the system with simple-simple (S-S) and clamped-clamped (C-C) supports are solved. Afterwards, the effects of size parameter, geometric parameters (nanoshell length and thickness), and mechanical and electric properties (piezoelectric effect) on nanoshell vibrations are investigated. Results demonstrate that the natural frequency on nanoshell in nanoscale is extremely dependent on nanoshell size. Increase in size parameter, thickness and flexoelectric effect of the material leads to increase in frequency of vibrations. Moreover, increased nanoshell length and diameter leads to decreased vibration frequency.

링발진기를 이용한 CMOS 온도센서 설계 (Design of CMOS Temperature Sensor Using Ring Oscillator)

  • 최진호
    • 한국정보통신학회논문지
    • /
    • 제19권9호
    • /
    • pp.2081-2086
    • /
    • 2015
  • 링 발진기를 이용한 온도센서를 공급전압 1.5volts를 사용하여 0.18㎛ CMOS 공정으로 설계하였다. 온도센서는 온도가 변화하더라도 일정한 출력주파수를 가지는 링 발진기와 온도가 증가하면 출력주파수가 감소하는 링 발진기를 이용하여 설계하였다. 온도를 디지털 값으로 변환하기 위해 온도에 무관한 링 발진기의 출력 신호는 카운터의 클럭 신호로 사용하였으며, 온도에 따라 변화하는 링 발진기의 출력신호는 카운터의 인에이블 신호로 사용하였다. 설계된 회로의 HPICE 시뮬레이션 결과 회로의 동작온도가 -20℃에서 70℃까지 변화할 때 온도 에러는 -0.7℃에서 1.0℃ 이내였다.