• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.825-832
• /
• 2012

GPS signal delay that caused by dry gases and water vapor in troposphere is a main error source of GPS point positioning and it must be eliminated for precise point positioning. In this paper, we implemented to generate tropospheric delay grid map over the Korean Peninsula based on post-processing method by using the GPS permanent station network in order to determine the availability of tropospheric delay generation algorithm. GIPSY 5.0 was used for GPS data process and nationwide AWS observation network was used to calculate the amount of dry delay and wet delay separately. As the result of grid map's accuracy analysis, the RMSE between grid map data and GPS site data was 0.7mm in ZHD, 7.6mm in ZWD and 8.5mm in ZTD. After grid map accuracy analysis, we applied the calculated tropospheric delay grid map to single frequency relative positioning algorithm and analyzed the positioning accuracy enhancement. As the result, positioning accuracy was improved up to 36% in case of relative positioning of Suwon(SUWN) and Mokpo(MKPO), that the baseline distance is about 297km.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.377-383
• /
• 2019

Naval ships that are navigating always have the possibility of colliding, but there is no clear maneuvering procedure for collision avoidance, and there is a tendency to depend entirely on the intuitive judgment of the Officer Of Watch (OOW). In this study, we conducted a questionnaire survey when and how to avoid collision for the OOW in a Constant Bearing, Decreasing Range (CBDR) situation wherein the naval ships encountered obstacles. Using the results of the questionnaire survey, we analyzed the CBDR situation of encountering obstacles, and how to avoid collision in day/night. The most difficult to maneuver areas were Pyeongtaek, Mokpo, and occurred mainly in narrow channels. The frequency appeared on average about once every four hours, and there were more of a large number of ships encountering situations than the 1:1 situation. The method of check of collision course confirmation was more reliable with the eye confirmation results, and priority was given to distance at closest point of approach (DCPA) and time at closest point of approach (TCPA). There was not a difference in DCPA between the give-way ship and stand-on ship, but a difference between day and night. Also, most navigators prefer to use maneuvering & shifting when avoiding collisions, and steering is 10-15°, shifting ±5knots, and the drift course was direction added stern of the obstacles to the direction of it. These results will facilitate in providing officers with standards for collision avoidance, and also apply to the development of AI and big data based unmanned ship collision avoidance algorithms.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.383-391
• /
• 2010

A Lifelog management system provides users with services to store, manage, and search their life logs. This paper proposes a fully-automatic collecting method of real world social contacts and lifelog search engine using collected social contact information as keyword. Wireless short-distance network devices in mobile phones are used to detect social contacts of their users. Human-Bluetooth relationship matrix is built based on the frequency of a human-being and a Bluetooth device being observed at the same time. Results show that with 20% of social contact information out of full social contact information of the observation times used for calculation, 90% of human-Bluetooth relationship can be correctly acquired. A lifelog search-engine that takes human names as keyword is suggested which compares two vectors, a row of Human-Bluetooth matrix and a vector of Bluetooth list scanned while a lifelog was created, using vector information retrieval model. This search engine returns more lifelog than existing text-matching search engine and ranks the result unlike existing search-engine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.249-257
• /
• 2017

Filtering the data for travel time records obtained from DSRC probes is essential for a better estimation of the link travel time. This study addresses the major deficiency in the performance of TRANSGUIDE in removing anomalous data. This algorithm is unable to handle unstable traffic flow conditions for certain time intervals, where fluctuations are observed. In this regard, this study proposes an algorithm that is capable of overcoming the weaknesses of TRANSGUIDE. If TRANSGUIDE fails to validate sufficient number of observations inside one time interval, another process specifies a new validity range based on the median absolute deviation (MAD), a common statistical approach. The proposed algorithm suggests the parameters, ${\alpha}$ and ${\beta}$, to consider the maximum allowed outlier within a one-time interval to respond to certain traffic flow conditions. The parameter estimation relies on historical data because it needs to be updated frequently. To test the proposed algorithm, the DSRC probe travel time data were collected from a multilane highway road section. Calibration of the model was performed by statistical data analysis through using cumulative relative frequency. The qualitative evaluation shows satisfactory performance. The proposed model overcomes the deficiency associated with the rapid change in travel time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.557-564
• /
• 2017

The purpose of the thermal imaging observation device mounted on the K's tank in the Republic of Korea military is to convert infrared rays into visual information to provide information about the environment under conditions of restricted visibility. Among the various performance indicators of thermal observation devices, such as the view, magnification, resolution, MTF, NETD, and Minimum Resolvable Temperature Difference (MRTD), the MRTD is the most important, because it can indicate both the spatial frequency and temperature resolvable. However, the standard method of measuring the MRTD in NATO contains many subjective factors. As the measurement result can vary depending on subjective factors such as the human eye, metal condition and measurement conditions, the MRTD obtained is not stable. In this study, these qualitative MRTD measurement systems are converted into quantitative indicators based on a gray scale using imaging processing. By converting the average of the gray scale differences of the black and white images into the MRTD, the mean values can be used to determine whether the performance requirements required by the defense specification are met. The (mean) value can also be used to discriminate between detection, recognition and identification and the detectable distance of the thermal equipment can be analyzed under various environmental conditions, such as altostratus, heavy rain and fog.

• Geophysics and Geophysical Exploration
• /
• v.16 no.4
• /
• pp.211-216
• /
• 2013

In general, smoothing filters regularize functions by reducing differences between adjacent values. The smoothing filters, therefore, can regularize inverse solutions and produce more accurate subsurface structure when we apply it to full waveform inversion. If we apply a smoothing filter with a constant coefficient to subsurface image or velocity model, it will make layer interfaces and fault structures vague because it does not consider any information of geologic structures and variations of velocity. In this study, we develop a selective smoothing regularization technique, which adapts smoothing coefficients according to inversion iteration, to solve the weakness of smoothing regularization with a constant coefficient. First, we determine appropriate frequencies and analyze the corresponding wavenumber coverage. Then, we define effective maximum wavenumber as 99 percentile of wavenumber spectrum in order to choose smoothing coefficients which can effectively limit the wavenumber coverage. By adapting the chosen smoothing coefficients according to the iteration, we can implement multi-scale full waveform inversion while inverting multi-frequency components simultaneously. Through the successful inversion example on a salt model with high-contrast velocity structures, we can note that our method effectively regularizes the inverse solution. We also verify that our scheme is applicable to field data through the numerical example to the synthetic data containing random noise.

• Journal of Wetlands Research
• /
• v.18 no.1
• /
• pp.76-83
• /
• 2016

In recent, the series of extreme storm events were occurred by those continuous typhoons and the severe flood damages due to the loss of life and the destruction of property were involved. In this study, we call Mega flood for the Extreme flood occurred by these successive storm events and so we can have a hypothetical Mega flood by assuming that a extreme event can be successively occurred with a certain time interval. Inter Event Time Definition (IETD) method was used to determine the time interval between continuous events in order to simulate Mega flood. Therefore, the continuous extreme rainfall events are determined with IETD then Mega flood is simulated by the consecutive events : (1) consecutive occurrence of two historical extreme events, (2) consecutive occurrence of two design events obtained by the frequency analysis based on the historical data. We have shown that Mega floods by continuous extreme rainfall events were increased by 6-17% when we compared to typical flood by a single event. We can expect that flood damage caused by Mega flood leads to much greater than damage driven by a single rainfall event. The second increase in the flood caused by heavy rain is not much compared to the first flood caused by heavy rain. But Continuous heavy rain brings the two times of flood damage. Therefore, flood damage caused by the virtual Mega flood of is judged to be very large. Here we used the hypothetical rainfall events which can occur Mega floods and this could be used for preparing for unexpected flood disaster by simulating Mega floods defined in this study.

• Journal of Korea Water Resources Association
• /
• v.49 no.4
• /
• pp.275-282
• /
• 2016

The objective of this study is to propose a new method to determine the drought event and the design drought severity. In order to define a drought event from precipitation data, theory of run was applied with the cumulative rainfall deficit. When we have a large amount of rainfall over the threshold level, in this study, we compare with the previous cumulative rainfall deficit to determine whether the drought is relieved or not. The recurrence characteristics of the drought severity on the specific duration was analyzed by the conditional bivariate copula function and confidence intervals were estimated to quantify uncertainties. The methodology was applied to Seoul station with the historical dataset (1909~2015). It was observed that the past droughts considered as extreme hydrological events had from 10 to 50 years of return period. On the other hand, the current on-going drought event started from 2013 showed the significantly higher return period. It is expected that the result of this study may be utilized as the reliable criteria based on the concept of return period for the drought contingency plan.

• Current Optics and Photonics
• /
• v.4 no.1
• /
• pp.31-43
• /
• 2020

The feasibility of the application of terahertz electromagnetic waves in the diagnosis of prostate cancer was examined. Four samples of incomplete cancerous prostatic paraffin-embedded tissues were examined using terahertz spectral imaging (TPI) system and the results obtained by comparing the absorption coefficient and refractive index of prostate tumor, normal prostate tissue and smooth muscle from one of the paraffin tissue masses examined were reported. Three hundred and sixty cases of absorption coefficients from one of the paraffin tissues examined were used as raw data to classify these three tissues using the Principal Component Analysis (PCA) and Least Squares Support Vector Machine (LS-SVM). An excellent classification with an accuracy of 92.22% in the prediction set was achieved. Using the distribution information of THz reflection signal intensity from sample surface and absorption coefficient of the sample, an attempt was made to use the TPI system to identify the boundaries of the different tissues involved (prostate tumors, normal and smooth muscles). The location of three identified regions in the terahertz images (frequency domain slice absorption coefficient imaging, 1.2 THz) were compared with those obtained from the histopathologic examination. The tissue tumor region had a distinctively visible color and could well be distinguished from other tissue regions in terahertz images. Results indicate that a THz spectroscopy imaging system can be efficiently used in conjunction with the proposed advanced computer-based mathematical analysis method to identify tumor regions in the paraffin tissue mass of prostate cancer.

• Journal of Magnetics
• /
• v.11 no.4
• /
• pp.195-207
• /
• 2006

The recently published and new results on design and fabrication of magnetophotonic crystals of different dimensionality are surveyed. Coupling of polarized light to 3D photonic crystals based on synthetic opals was studied in the case of low dielectric contrast. Transmissivity of opals was demonstrated to strongly depend on the propagation direction of light and its polarization. It was shown that in a vicinity of the frequency of a single Bragg resonance in a 3D photonic crystal the incident linearly polarized light excites inside the crystal the TE- and TM-eigen modes which passing through the crystal is influenced by Brags diffraction of electromagnetic field from different (hkl) sets of crystallographic planes. We also measured the faraday effect of opals immersed in a magneto-optically active liquid. It was shown that the behavior of the faraday rotation spectrum of the system of the opal sample and magneto-optically active liquid directly interrelates with transmittance anisotropy of the opal sample. The photonic band structure, transmittance and Faraday rotation of the light in three-dimensional magnetophotonic crystals of simple cubic and face centered cubic lattices formed from magneto-optically active spheres where studied by the layer Korringa-Kohn-Rostoker method. We found that a photonic band structure is most significantly altered by the magneto-optical activity of spheres for the high-symmetry directions where the degeneracies between TE and TM polarized modes for the corresponding non-magnetic photonic crystals exist. The significant enhancement of the Faraday rotation appears for these directions in the proximity of the band edges, because of the slowing down of the light. New approaches for one-dimensional magnetophotonic crystals fabrication optimized for the magneto-optical Faraday effect enhancement are proposed and realized. One-dimensional magnetophotonic crystals utilizing the second and the third photonic band gaps optimized for the Faraday effect enhancement have been successfully fabricated. Additionally, magnetophotonic crystals consist of a stack of ferrimagnetic Bi-substituted yttrium-iron garnet layers alternated with dielectric silicon oxide layers of the same optical thickness. High refractive index difference provides the strong spatial localization of the electromagnetic field with the wavelength corresponding to the long-wavelength edge of the photonic band gap.