• 제목/요약/키워드: frequency spectrum curve

검색결과 38건 처리시간 0.026초

음향현미경의 V(z)곡선을 이용한 재료의 특성에 관한 연구 (A study on the characteristic of material using V(z) curve of acoustic microscope)

  • 문건;고대식;전계석
    • 한국음향학회지
    • /
    • 제7권2호
    • /
    • pp.65-73
    • /
    • 1988
  • 본 논문에서는 음향현미경의 V(z)곡선을 해석하고 실험결과와 비교 고찰하였으며 V(z)곡선과 재료의 탄성 특성사이의 관계를 연구분석하였다. V(z)곡선의 이론적인 해석은 angular spectrum과 ray optics 이론을 사용하였고 실험은 동작주파수가 3MHz인 음향현미경을 구성하여 행하였다. 실험결과 V(z)곡선은 재료마다 고유의 형태를 나타내며 V(z) 곡선에서 극대치 사이의 간격은 재료에서 Rayleigh 파의 음향속도를 산출하는 데 이용될 수 있음을 보였다.

  • PDF

진동제어 콘크리트 개발에 관한 실험적 연구(I) (Experimental Study for the Development of Vibration-Controlled Concrete (I))

  • 정영수;이대형;최우성
    • 콘크리트학회지
    • /
    • 제8권5호
    • /
    • pp.123-133
    • /
    • 1996
  • 최근의 각종 사회시설의 확충에 따른 건설공사 및 교통시설 등은 많은 진동을 유발하여 사회적인 문제를 야기하고 있는 실정이다. 본 연구는 각종 제진재료를 이용하여 진동을 억제할 수 있는 콘크리트를 개발하여 각종 건설공사에서 흔히 발생할 수 있는 진동공해문제를 억제하고자 하며 아울러 폐기물의 재활용차원에서 폐자재를 이용하여 유용한 제진콘크리트를 개발하고자 하는데 그 목적이 있다. 우선, 제진재료를 이용한 압축강도 200kg/$\textrm{cm}^2$ 이상의 콘크리트 배합비를 찾기 위하여 Pilot실험을 수행하였으며, 선정된 적정배합비에 다른 진동시험제를 제작하여 재료의 동적특성 즉, 1차공명진동수, 동탄성계수 및 감쇠비를 측정하여 제진효과를 조사하였다. 제진재료로서는 Foam, Latex, Rubber Powder 그리고 Plastic Resin 등을 사용하였으며 진동의 감쇠효과가 있는 것으로 나타났다. 실험방법으로는 KS F 2437 규정과 진동파의 속도법을 사용하였으며, 감쇠비 측정은 Frequency Response Spectrum 곡선에 대한 Polynomial Curvefitting방법과 기하학적 해석방법을 이용하여 각각의 결과를 비교.분석하였다.

Cutoff Probe Analysis and Improvement

  • 김대웅;유신재;유광호;박민;김정형;성대진;장홍영
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.142-142
    • /
    • 2011
  • Microwave diagnostics method for plasma science and engineering is vigorous research area for its good characteristics such as high sensitivity, reliability, and broad measurement spectrum from low density plasma to high density. We investigate mechanism of microwave probes (hairpin, impedance and absorbtionf probe) and apply it for interpretation of full transmitted spectrum of cutoff probe. Mechanism of the spectrum having same key roles of I-V curve of Langmuir probe is not exactly revealed yet in spite of its importance. This study elucidates physics behind it using a circuit model and E/M wave simulation. Circuit model reveals exact cut-off peak frequency taking account of a collision frequency and a plasma frequency and it enable precise diagnostics of plasma densty from low pressure to high pressre. Cut-off like peaks have been obstacle for choosing cut-off peak is analyzed by E/M simulation and one of cutoff like peaks made by probe holder used for acquire plasma density with cutoff peak applying the hairpin relation. Furthermore, phase difference method for plasma density is conducted. This method uses a single microwave frequency source and it is low-priced.

  • PDF

SASW실험 분산곡선의 자동화 계산을 위한 주파수-파수 기법 (Frequency-Wave Number Method for the Automated Calculation of the Phase Velocities from the SASW Measurements)

  • 조성호;강태호
    • 한국지반공학회논문집
    • /
    • 제19권4호
    • /
    • pp.299-310
    • /
    • 2003
  • SASW 실험으로 지반의 전단강성 구조를 구하는 해석과정에 있어서 위상속도의 계산은 SASW 실험의 신뢰도를 좌우하는 매우 중요한 단계이다. 기존의 SASW 자료 분석기법 중 위상속도의 계산은 전문가적 경험을 이용한 위상각 스펙트럼의 분석이 선행되어야 하는데, 위상각 스펙트럼 분석 과정의 난해성은 SASW 기법의 일반화에 장애가 되어 왔었다. 본 연구에서는 SASW 기법에 적용가능하고, 위상속도 계산에 전문가적 경험을 배제할 수 있으며, 자동화함으로써 효율성을 제고할 수 있는 위상속도 계산 기법을 제안하였다. 본 연구에서 제안한 기법은 다층구조 지반에서의 표면파의 주파수파수 특성을 이용하였으며, 그 개념에 기초하여 주파수파수 기법(Frequency-Wave Number Technique)이라고 하였다. 본 연구에서 제안한 기법의 신뢰성을 검증하기 위하여, SASW 수치실험을 수행하였다. 그리고 SASW 수치실험에 의해 구한 이론 전달함수로부터 위상속도를 계산하여, 위상각전개법으로 구한 위상속도와 비교 검토하였다. 또한, 경기도$\bigcirc$$\bigcirc$ 지구에서 수행한 SASW 실험자료에 대해 본 연구에서 제안한 기법을 적용하여 현장적용성 및 실용성을 확인하였다.

2.75인치 로켓트 모터의 연소완료지표 계측기법 (Measuring Technique of Burn-out Indices for 2.75″ Rocket Motor)

  • 강규창;최주호;유준
    • 한국군사과학기술학회지
    • /
    • 제3권1호
    • /
    • pp.106-115
    • /
    • 2000
  • This paper presents the measuring technique of time and velocity when rocket motor is burnt out for 2.751" rocket. This technique use doppler effect, frequency spectrum analysis and curve fitting. In this study, we use muzzle velocity radar for doppler signal acquisition, short-time fourier transform for spectrum analysis and curve fitting for smoothing.

  • PDF

구조물 동적시스템 재현기법 (Structural Dynamic System Reconstruction)

  • 김형윤
    • 제어로봇시스템학회논문지
    • /
    • 제8권4호
    • /
    • pp.308-312
    • /
    • 2002
  • To determine the natural frequencies and damping ratios of composite laminated plates, we present an officient modal parameter estimation technique by developing residual spectrum based structural system reconstruction. The modal parameters can be estimated from poles and residues of the system transfer functions, derived from the state space system matrices. From vibration tests on cross-ply and angle-ply composite laminates, the natural frequencies and damping ratios can be estimated using the modal coordinates of the structural dynamic system reconstructed from the experimental frequency response functions. These results are compared with those of finite element analysis and single-degree-of-freedom curve fitting.

An Application of Hilbert-Huang Transform on the Non-Stationary Astronomical Time Series: The Superorbital Modulation of SMC X-1

  • Hu, Chin-Ping;Chou, Yi;Wu, Ming-Chya;Yang, Ting-Chang;Su, Yi-Hao
    • Journal of Astronomy and Space Sciences
    • /
    • 제30권2호
    • /
    • pp.79-82
    • /
    • 2013
  • We present the Hilbert-Huang transform (HHT) analysis on the quasi-periodic modulation of SMC X-1. SMC X-1, consisting of a neutron star and a massive companion, exhibits superorbital modulation with a period varying between ~40 d and ~65 d. We applied the HHT on the light curve observed by the All-Sky Monitor onboard Rossi X-ray Timing Explorer (RXTE) to obtain the instantaneous frequency of the superorbital modulation of SMC X-1. The resultant Hilbert spectrum is consistent with the dynamic power spectrum while it shows more detailed information in both the time and frequency domains. According to the instantaneous frequency, we found a correlation between the superorbital period and the modulation amplitude. Combining the spectral observation made by the Proportional Counter Array onboard RXTE and the superorbital phase derived in the HHT, we performed a superorbital phase-resolved spectral analysis of SMC X-1. An analysis of the spectral parameters versus the orbital phase for different superorbital states revealed that the diversity of $n_H$ has an orbital dependence. Furthermore, we obtained the variation in the eclipse profiles by folding the All Sky Monitor light curve with orbital period for different superorbital states. A dip feature, similar to the pre-eclipse dip of Her X-1, can be observed only in the superorbital ascending and descending states, while the width is anti-correlated with the X-ray flux.

면진구조물 내 층응답스펙트럼 작성을 위한 고려사항 (Considerations for the Generation of In-Structure Response Spectra in Seismically Isolated Structures)

  • 이승재;김정한
    • 한국지진공학회논문집
    • /
    • 제26권2호
    • /
    • pp.95-103
    • /
    • 2022
  • In order to evaluate the earthquake safety of equipment in structures, it is essential to analyze the In-Structure Response Spectrum (ISRS). The ISRS has a peak value at the frequency corresponding to the structural vibration mode, but the frequency and amplitude at the peak can vary because of many uncertain parameters. There are several seismic design criteria for ISRS peak-broadening for fixed base structures. However, there are no suggested criteria for constructing the design ISRS of seismically isolated structures. The ISRS of isolated structures may change due to the major uncertainty parameter of the isolator, which is the shear stiffness of the isolator and the several uncertainty parameters caused by the nonlinear behavior of isolators. This study evaluated the effects on the ISRS due to the initial stiffness of the bi-linear curve of isolators and the variation of effective stiffness by the input ground motion intensity and intense motion duration. Analyzing a simplified structural model for isolated base structure confirmed that the ISRS at the frequency of structural mode was amplified and shifted. It was found that the uncertainty of the initial stiffness of isolators significantly affects the shape of ISRS. The variation caused by the intensity and duration of input ground motions was also evaluated. These results suggested several considerations for generating ISRS for seismically isolated structures.

다양한 인공 신경망을 적용한 광대역 스펙트럼의 피로손상 예측 (Fatigue Damage Estimation of Wide Band Spectrum Considering Various Artificial Neural Networks)

  • 박준범;김성용
    • 한국해양공학회지
    • /
    • 제30권5호
    • /
    • pp.341-348
    • /
    • 2016
  • The fatigue damage caused by wide band loadings has generally been predicted using fatigue damage models in the frequency domain rather than a rain-flow counting method in the time domain because of its computation cost. This study showed that these fatigue damage models can be simplified in the form of normalized fatigue damage as a function of the S-N curve slope and bandwidth parameters. Based on numerical simulations of various wide band spectra, it was found that fatigue damage models in the form of normalized fatigue damage with one S-N curve slope and two bandwidth parameters( α1 , α2 ) provided less reasonable fatigue damage. Therefore, an additional bandwidth parameter needs to be considered based on a sensitivity study using various neural networks, which proved that α1-5 would be the dominant factor of a fatigue damage model as an additional bandwidth parameter.

^{87}Rb D_2$ 전이선에 대한 원편광 분광 연구 및 레이저 주파수 안정화 (Circular Polarization Spectroscopy in ^{87}Rb D_2$ line and Laser Frequency Stabilization)

  • 문한섭;김승일;김현아;김중복;이호성
    • 한국광학회지
    • /
    • 제6권4호
    • /
    • pp.317-323
    • /
    • 1995
  • 선폭 축소된 반도체 레이저를 이용하여 루비듐 원자의 $D_{2}$ 전이선에 대해 도플러 효과가 제거된 편광분광을 실시하고 광펌핑 편광 분광 이론과 비교하였다. 펌프광이 충분히 약했을 때 실험에서 얻어진 분산모양의 스펙트럼은 단일 주기 광펌핑 이론과 잘 일치하였다. 또한 편광 분광 신호를 직접 오차신호로 사용하여 공진기 길이를 보상한 결과, 주파수 변조를 하지 않고서도 레이저 주파수를 원자의 초미세 전이선에 안정화시킬 수 있었다.

  • PDF