• 교육녹색환경연구
• /
• 제9권2호
• /
• pp.1-8
• /
• 2010

This study is to present an engineering solution for the repair frequency and repair rates of a building. The existing data for the repair frequency and repair rates are used to draw the probability distribution for the generalized repair frequency and repair rate in a building. The suggested methodology can be widely used for most buildings to estimate the legal repair frequency and repair rates. Also, the methodology can be applied to resolve the risks on the maintenance costs in LC (Life Cycle) plans or LCC (Life Cycle Cost) analysis. As the future studies, there are the multiple regression analysis including the parameters on incurred costs and the decision methods on efficient repair and replacement.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.48-55
• /
• 2018

본 연구의 목적은 구조 시스템의 구조적 손상에 의한 고유주파수 감소율과 감쇠변수 증가율을 비교 분석하는 것이다. 이를 위하여 저주파 영역의 고유주파수와 비교적 높은 감쇠변수 특성을 갖는 2경간 H-Beam을 대상으로 실내실험과 수치해석을 수행하였으며, 충격하중에 대한 손상 전과 손상 후 응답신호를 각각 14개 위치에서 분석하였다. 각 위치에 대한 손상 전과 손상 후 응답신호는 푸리에 변환을 통하여 고유주파수 감소율을 분석하였으며, 감쇠변수 증가율은 웨이블릿 변환을 통하여 수행되었다. 웨이블릿 변환은 최대 웨이블릿 계수에 대응되는 스케일의 시간함수 분리가 가능하기 때문에 감쇠변수 평가에 대한 정확성을 높일 수 있다. 손상 전과 손상 후 계측된 응답신호에 대하여 고유주파수 감소율은 민감하지 못한 결과로 평가되었고, 감쇠변수 증가율은 비교적 큰 변화량을 보여 구조 시스템의 손상도 평가에 신뢰할 수 있는 결과를 보여주었다.

• 한국재료학회지
• /
• 제25권4호
• /
• pp.183-190
• /
• 2015

Fatigue crack growth rate tests were conducted as a function of temperature, dissolved hydrogen (DH) level, and frequency in a simulated PWR environment. Fatigue crack growth rates increased slightly with increasing temperature in air. However, the fatigue crack growth rate did not change with increasing temperature in PWR water conditions. The DH levels did not affect the measured crack growth rate under the given test conditions. At $316^{\circ}C$, oxides were observed on the fatigue crack surface, where the size of the oxide particles was about $0.2{\mu}m$ at 5 ppb. Fatigue crack growth rate increased slightly with decreasing frequency within the frequency range of 0.1 Hz and 10 Hz in PWR water conditions; however, crack growth rate increased considerably at 0.01 Hz. The decrease of the fatigue crack growth rate in PWR water condition is attributed to crack closure resulting from the formation of oxides near the crack tips at a rather fast loading frequency of 10 Hz.

• Journal of Biosystems Engineering
• /
• 제25권5호
• /
• pp.351-358
• /
• 2000

This study was conducted to develop a speed control system of a DC motor which drove a barley seeder mounted on a combine harvester. Barley seeder mounted on a combine has been known to reduce labor and cost of barley cultivation. However, development of the seeder has been unsuccessful because the combine, a dedicated rice and barley harvester has not enough space and proper power take-off for barley seeder. To develop a barley seeder, small powered motor speed controller was required. A proximity sensor for detecting working speed of the combine and a programmable one board microprocessor was used to develope a control system. Motor parameters and motor constant, relationship between seeding rate, motor speed, groove volumes of a tested roller, torque were measured. The proximity sensor sent a frequency signal to the microprocessor. In laboratory experiments, the excitation voltage of the motor was shown not to be proportional to the size of pulse width (duty ratio). A table transforming frequency signal, that represented for working speed to proper pulse width was developed from seeding rate experiments. However, seeding rate at low frequency signal was not proportional to the working speed. Seeding rate control proportional to the frequency signal was achieved by shifting of the frequency signal.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.49-55
• /
• 2020

In order to improve the electromagnetic shielding rate of Carbon Fiber (CF), it was produced using the nickel nano-powder impregnating method. Using two types of nickel powder having thicknesses of 50 ㎛ and 100 ㎛, and a thermoplastic elastomer resin, a compound containing 10-20% nickel content was mixed and then manufactured through an extruder. The CF coated with the compound was woven and manufactured using a 1-ply specimen. The final nickel content of the specimen was verified using TGA and the distribution of nickel powder on the CF surface was verified using SEM. The metal shows a high shielding rate in the low-frequency band, but the shielding rate decreases at higher-frequency bands. The CF improves at the higher frequency band, and metals reflect electromagnetic waves while carbon absorbs electromagnetic waves. The study of shielding materials, which are stronger and lighter than metal, by using CF lighter than metal and enabling the shielding rate from low-frequency band to high-frequency band, confirmed that the larger the area coated with nickel nano-powder, the better the electromagnetic shielding performance. In particular, CF coated with a thickness of 100 ㎛ has a shielding rate similar to that of copper and can also be used for EV/HEV automotive cables and other applications in the future.

• 대한건축학회논문집:계획계
• /
• 제34권2호
• /
• pp.59-66
• /
• 2018

The purpose of this study is to investigate the method on improving the frequency of use and satisfaction rate of the community facilities and to evaluate relation between improving the frequency of use and satisfaction rate of the community facilities and improving the sense of community in apartments. The research subjects of this study is the four public lease apartments which is built around same period with same design guide. The survey method is a questionnaire survey, a experimental study, focus group interview, an analysing drawing. The result of study is as follows. The first, the frequency of use and satisfaction rate have been effected by the operation management system as well as the physical circumstance. The second, The frequency of use and satisfaction rate of the community facilities have had positive correlation with sense of community. The third, multimedia room and conference room with low usability need to change a multipurpose space such as cafe, classroom for learning on artistic topic with high demand from occupant. Finally, a mindset shift is required for architects to inspire community facilities as an important mediated space improving the sense of community by suggesting spaces for leisure and hobby activities.

• 한국통신학회논문지
• /
• 제36권2A호
• /
• pp.127-132
• /
• 2011

본 논문은 Chirp 신호가 변조된 UWB frequency slope를 이용한 거리 측정 기술 및 통신 시스템을 제안하였다. 오직 up-chirp 만 사용하거나 혹은 (주파수 간) 동일한 주파수 변화도(frequency sweeping rate)를 가진 down-chirp 만 사용하는 대신에, 제안된 시스템은 주파수 도약을 이용하여 서로 다른 주파수 변화도를 가지는 여러 Chirp 신호를 사용한다. 제안된 시스템은 데이터 전송 속도를 증가시킬 수 있고 동시에 사용자들이 사용한 sequence 간에 간섭도 줄일 수 있기 때문에 기존 통신 거리 측정 전략보다도 성능이 좋다. 본 논문에서는 연구의 타당성을 보이기 위해 MATLAB을 이용한 UWB 통신 시스템의 시뮬레이션을 제시한다.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1571-1577
• /
• 2013

Electrical tree structure is one of the most important influencing factors for electrical treeing characteristics in polymers. In this paper, we focused on the structure characteristics of electrical treeing in epoxy resins (original) insulation under different high-frequency voltages (60, 500, 1000Hz). Effects of voltage frequency on the ac electrical treeing phenomena in an epoxy resins were carried out in needle-plate electrode arrangement. To measure the treeing initiation and propagation, and the breakdown rate, constant AC of 10 kV with three different voltage frequencies (60, 500 and 1,000 Hz) was applied to the specimen in needle-plate electrode specimen at $30^{\circ}C$ of insulating oil bath. At 60 Hz, the treeing initiation time was 360 min and the propagation rate was $6.85{\times}10^{-4}mm/min$, and the morphology was dense branch type. As the voltage frequency increased, the treeing initiation time decreased and the propagation rate increased. At 1,000 Hz, the treeing initiation time was 0 min and the propagation rate was $7.81{\times}10^{-2}mm/min$, and the morphology was dense bush type.

• The Korean Journal of Ecology
• /
• 제20권6호
• /
• pp.423-438
• /
• 1997

The structure and variation of the mating call in Rana nigromaculata was studied in a population at Da-rak, Chong-won, Chung-buk (36$\circ$ 37' latitude, 127$\circ$ 21' longitude) in Korea. The mating call consists of 3 to 8 pulse groups divided by clear silent intervals. Each pulse group is also composed of fine pulses. Temperature and body size affect the temporal and spectral characteristics of the mating call. Pulse, pulse group repetition rate and dominant frequency rise with increasing temperature, whereas pulse grouprepetition rate and dominant frequency decrease with increasing body size. A playback experiment was designed to establish the effect of a potential intruder on male calling. During the stimulus periods, resident males markedly decreased the pulse repetition rate, and icreased the rate of pulse groups, dominant frequency, and the number of call groups. This results indicate that this species responds in a graded fashion when interacting with other individuals.

• Transactions on Electrical and Electronic Materials
• /
• 제14권5호
• /
• pp.278-281
• /
• 2013

The effects of electric field frequency on the AC electrical treeing phenomena in an epoxy/layered silicate (1.5 wt%) were investigated in a needle-plate electrode arrangement. A layered silicate was exfoliated in an epoxy-base resin with AC electric field apparatus. To measure the treeing initiation and propagation- and the breakdown rate, a constant alternating current (AC) of 10 kV with three different electric field frequencies (60, 500, and 1,000 Hz) was applied to the specimen in the needle-plate electrode specimen in an insulating oil bath at $130^{\circ}C$. At 60 Hz, the treeing initiation time was 12 min, the propagation rate was $0.24{\times}10^{-3}$ mm/min, and the morphology was a dense branch type. As the electric field frequency increased, the treeing initiation time decreased and the propagation rate increased. At 1,000 Hz, the treeing initiation time was 5 min, the propagation rate was $0.30{\times}10^{-3}$ mm/min, and the morphology was a dense bush type.