• The Journal of the Acoustical Society of Korea
• /
• v.34 no.3
• /
• pp.219-226
• /
• 2015

In this paper, derivation of the STL (Sound Transmission Loss) of a square plate installed in an impedance tube is discussed using an analytic method. Coupled motion of the plate vibration and acoustic field is considered. Vibration of the plate and pressure field inside the tube are expressed in terms of the infinite series of modal functions. Under the plane wave assumption, it is shown that consideration of the first few modes yields sufficiently accurate results. When the boundary of the plate is clamped, vibration mode is assumed as a multiplication of the beam modes corresponding to the crosswise directions. The natural frequencies of the clamped plate are calculated using the Rayleigh-Ritz method. It is found that the STL shows a dip at the lowest natural frequency of the plate, and increases as the frequency decreases below the natural frequency. Comparison of the result in this paper with the STL obtained by measurements and FE computations in the reference shows an excellent agreement.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.2
• /
• pp.5-11
• /
• 1974

Theoretical analysis is carried out for the beat frequency generation phenomena in the IMPATT diodes an4 the experimental studies are given in parrallel. The theory is based on the space charge modulation effect introduced to the multiplication process by the input signal. Computed results show that the beat frequency output power is linearly dependent upon the signal power and self oscillating power. Also the strong dependence of the output power with respect to the diode negative resistance is found and it turns out that the larger the negative resistance, the stronger the beat frequency output power. Experimental results show a good agreement with the theoretical values. Calculated conversion gain is about -0.4[db] at 10[GHz] and the experimental value shows -6.2[db] below this value. This difference between the theoretical and the experimental values is considered to be the results of the ineffective injection of signal power.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.777-784
• /
• 2004

In this paper, a new filter structure to improve frequency response characteristics in decimation filter using CIC(Cascaded Integrator-Comb) filters and half band filters is proposed. Conventional filters improve only passband characteristics, but we propose a new filter which can improve stop band and pass band characteristics simultaneously. Since proposed filter needs only two multiplication, additional implementation cost is not much. And overall linear phase characteristics are maintained since the proposed filter is also linear phase. Finally, filter coefficients quantization effects ate discussed after Verilog-HDL coding.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.2
• /
• pp.31-38
• /
• 2012

In this paper, a low area timing synchronization structure for the IEEE 802.11a OFDM MODEM SoC is proposed. The timing synchronization block of the IEEE 802.11a OFDM MODEM SoC requires large implementation area. In the proposed timing synchronization structure, it is shown that the number of multiplication can be reduced by using the transposed direct form filter. Furthermore, implementation area of the proposed structure can be more reduced using CSD(Canonic Signed Digit) and Common Sub-expression Sharing techniques. Through Verilog-HDL coding and synthesis, it is shown that the 22.7 % of implementation area can be reduced compared with the conventional one.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.3208-3229
• /
• 2017

Rectification is an essential procedure for simplifying the disparity extraction of stereo matching algorithms by removing vertical mismatches between left and right images. To support real-time stereo matching, studies have introduced several look-up table (LUT)- and computational logic (CL)-based rectification approaches. However, to support high-resolution images, the LUT-based approach requires considerable memory resources, and the CL-based approach requires numerous hardware resources for its circuit implementation. Thus, this paper proposes a multi-level accumulation-based rectification method as a simple CL-based method and its circuit implementation. The proposed method, which includes distortion correction, reduces addition operations by 29%, and removes multiplication operations by replacing the complex matrix computations and high-degree polynomial calculations of the conventional rectification with simple multi-level accumulations. The proposed rectification circuit can rectify $1,280{\times}720$ stereo images at a frame rate of 135 fps at a clock frequency of 125 MHz. Because the circuit is fully pipelined, it continuously generates a pair of left and right rectified pixels every cycle after 13-cycle latency plus initial image buffering time. Experimental results show that the proposed method requires significantly fewer hardware resources than the conventional method while the differences between the results of the proposed and conventional full rectifications are negligible.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.573-578
• /
• 2004

The most important effects on algae multiplication are coming from maintaining the growth environment such as necessary nutrients and proper temperature, but it is difficult to adjust for every species individually. In this study, therefore, the environment is obtained using the local water where target organisms live, and their growth is promoted by raising the water temperature. A sensor to count the organism population is developed here. Because the early stage of a sudden increase of the algae population is detected using the sensor, it is available to predict the sudden increase of algae, a source of red tide.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.151-156
• /
• 1995

This paper presents a methodology for real-time detecting and identifying the runout geometry of an end mill. Cutter runout is a common but undesirable phenomenon in multi-tooth machining such as end-milling process because it introduces variable chip loading to insert which results in a accelerated tool wear,amplification of force variation and hence enlargement vibration amplitude. Form understanding of chip load change kinematics, the analytical sutting force model was formulated as the angular domain convolution of three dynamic cutting force component functions. By virtue of the convolution integration property, the frequency domain expression of the total cutting forces can be given as the algebraic multiplication of the Fourier transforms of the local cutting forces and the chip width density of the cutter. Experimental study are presented to validata the analytical model. This study provides the in-process monitoring and compensation of dynamic cutter runout to improve machining tolerance tolerance and surface quality for industriql application.

• Journal of Biomedical Engineering Research
• /
• v.29 no.6
• /
• pp.502-511
• /
• 2008

This study was designed to develop a new algorithm to extract the voluntary EMG and the evoked EMG from a mixed EMG generated when the muscle is stimulated both voluntarily and by electrical stimulation in the FES system. The proposed parallel filter algorithm consists of three phases: (1) Fourier transform of the mixed EMG, (2) multiplication of the transformed signal to two frequency functions, and (3) inverse Fourier transform. Four incomplete spinal cord injured patients participated in the experiments to evaluate the algorithm by measuring the knee extensor torque and the EMG signals from the quadriceps. Two functions of the algorithms were evaluated: (1) extraction of the evoked EMG and (2) the voluntary EMG from the mixed EMG. The results showed that the algorithm enabled us to separate the two EMG components in real time from the mixed EMG. The algorithm can and will be used for estimating the voluntary torque and the evoked torque independently through an artificial neural network based on the two EMG components, and also for generating a trigger signal to control the on/off time of the FES system.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.133-139
• /
• 2011

The largest terms in the solid Earth body tide calculation are second degree spherical harmonic components due to the moon or the sun, and they compose about 98 percent of total contribution. Each degree harmonics of the tidal perturbation should be evaluated through multiplication with distinct Love numbers or their combinations. Correct evaluation of these terms in gravity tide is considered with re-calculated Love numbers. Frequency dependence of Love numbers for spherical harmonic tide upon the order number is discussed. Tidal displacement and tidally induced deviation of the vertical are also evaluated. Essential concepts underlying the body tide calculation are briefly summarized.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.6
• /
• pp.550-557
• /
• 2001

There are several applications and error analysis methods using GPS(Global Positioning System) In most analysis positioning and timing errors are represented as the multiplication of DOP(Dilution Of Precision) and measurement errors, which are affected by the receiver and measurement type. Therefore, lots of DOPs are defined and used to analyze and predict the performance of positioning and timing systems. In this paper, the relationships between these DOPs are investigated in detail, The relationships between GDOP(Geometric DOP), PDOP(Position DOP) and TDOP(Time DOP) in the absolute positioning are de-rived. Using these relationships, the affect of clock bias is analyzed. The relationships between RGDOP(Relative DOP) and PDOP are also derived in relative positioning where the single difference and double dif-ference techniques are used. From the results, it is expected that using the common clock will give better performance when the single difference technique is used while the effects of clock is eliminate when the double difference technique is used. Finally, the error analyses of dual frequency receivers show that the narrow lane measurements give more accurate results than wide line of or L1. L2 independent measurements.