• Asia pacific journal of information systems
• /
• v.19 no.3
• /
• pp.125-150
• /
• 2009

RFID(Radio Frequency IDentification) is a wireless frequency of recognition technology that can be used to recognize, trace, and identify people, things, and animals using radio frequency(RF). RFID will bring about many changes in manufacturing and distributions, among other areas. In accordance with the increasing importance of RFID techniques, great advancement has been made in RFID studies. Initially, the RFID research started as a research literature or case study. Recently, empirical research has floated on the surface for announcement. But most of the existing researches on RFID adoption have been restricted to a dichotomous measure of 'adoption vs. non-adoption' or adoption intention. In short, RFID research is still at an initial stage, mainly focusing on the research of the RFID performance, integration, and its usage has been considered dismissive. The purpose of this study is to investigate which factors are important for the RFID adoption and implementation with organizational resources. In this study, the organizational resources are classified into either finance resources or IT knowledge resources. A research model and four hypotheses are set up to identify the relationships among these variables based on the investigations of such theories as technological innovations, adoption stage, and organizational resources. In order to conduct this study, a survey was carried out from September 27, 2008 until October 23, 2008. The questionnaire was completed by 143 managers and workers from physical distribution and manufacturing companies related to the RFID in South Korea. 37 out of 180 surveys, which turned out unfit for the study, were discarded and the remaining 143(adoption stage 89, implementation stage 54) were used for the empirical study. The statistics were analyzed using Excel 2003 and SPSS 12.0. The results of the analysis are as follows. First, the adoption stage shows that perceived benefits, standardization, perceived cost savings, environmental uncertainty, and pressures from rival firms have significant effects on the intent of the RFID adoption. Further, the implementation stage shows that perceived benefits, standardization, environmental uncertainty, pressures from rival firms, inter-organizational cooperation, and inter-organizational trust have significant effects on the extent of the RFID use. In contrast, inter-organizational cooperation and inter-organizational trust did not show much impact on the intent of RFID adoption while perceived cost savings did not significantly affect the extent of RFID use. Second, in the adoption stage, financial issues had adverse effect on both inter-organizational cooperation and the intent against the RFID adoption. IT knowledge resources also had a deterring effect on both perceived cost savings and the extent of the RFID adoption. Third, in the implementation stage, finance resources had a moderate effect on environmental uncertainty and extent of RFID use while IT knowledge resources had also a moderate effect on perceived cost savings and the extent of the RFID use. Limitations and future research issues can be summarized as follows. First, it is difficult to say that the sample is large enough to be representative of the population. Second, because the sample of this study was conducted among manufacturers only, it may be limited in analyzing fully the effect on the industry as a whole. Third, in consideration of the fact that the organizational resources in the RFID study require a great deal of researches, this research may deem insufficient to fulfill the purpose that it initially set out to achieve. Future studies using performance research are, therefore, needed to help better understand the organizational level of the RFID adoption and implementation.

• Journal of Wetlands Research
• /
• v.6 no.3
• /
• pp.71-81
• /
• 2004

In recent, the heavy rainfall is frequently occurred and the damage tends to be increased. So, more careful hydrologic analysis is required for the designs of the hydraulic or disaster prevention structures. The time distribution of a rainfall is one of the important factors for the estimation of peak flow in hydrologic and hydraulic designs. This study is to suggest a methodology for the estimation of a rainfall time distribution which can reflect the meteorologic and topographical characteristics of Daejeon area. We collect the 34 years' rainfall data recorded in the range of 1969 to 2002 for Daejeon area and we performed the rainfall analysis with the data in between May and October of each year. According to the Huff method, the collected data corresponds to the first quartile which the rainfall is concentrated in the primary stage but the suggested method shows the different rainfall distribution with the Huff method in time. The reason is that the Huff method determines the quartile in each storm event while the suggested one determines it by estimating the dimensionless distribution of rainfall in duration after the accumulation of rainfall in time. The rainfall distributions estimated by two methodologies were applied to the Gabcheon basin in Daejeon area for the estimation of flood flow. Here we use the SCS method for the effective rainfall and unit hydrograph for the flood discharge. As the results, the peak flow for 24-hour of 100-year frequency was estimated as a $3421.20m^3/sec$ by the Huff method and $3493.38m^3/sec$ by the suggested one. We can see the difference of $72.18m^3/sec$ in between two methods and thus we may carefully determine the rainfall time distribution and compute the effective rainfall for the estimation of the peak flow.

• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.481-493
• /
• 2016

The statistical analysis to the torrential rainfall data that is defined as a rainfall amount more than 80 mm/day is performed with Daegu and Busan rainfall data which is collected during 384 months. The number of occurrence of the torrential rainfall events can be simulated usually using Poisson distribution. However, the Poisson distribution can be frequently failed to simulate the statistical characteristics of the observed value when the observed data is zero-inflated. Therefore, in this study, Generalized Poisson distribution (GPD), Zero-Inflated Poisson distribution (ZIP), Zero-Inflated Generalized Poisson distribution (ZIGP), and Bayesian ZIGP model were used to resolve the zero-inflated problem in the torrential rainfall data. Especially, in Bayesian ZIGP model, a informative prior distribution was used to increase the accuracy of that model. Finally, it was suggested that POI and GPD model should be discouraged to fit the frequency of the torrential rainfall data. Also, Bayesian ZIGP model using informative prior provided the most accurate results. Additionally, it was recommended that ZIP model could be alternative choice on the practical aspect since the Bayesian approach of this study was considerably complex.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.251-257
• /
• 2012

Human body communication means transmitting and receiving data through human body medium or through free space along with the human body skin. Electric field distribution around the human body between the transmitter and the receiver were calculated at five different frequencies with 5 MHz interval between 10 MHz and 30 MHz. Commercial electromagnetic simulation tool was used for the calculation of E-field distributions applying the Korean standard male model including 29 different kinds of human tissues. After calculating specific absorption rate(SAR) values on back of the hand, it was compared with International Commission on Non-Ionizing Radiation Protection(ICNIRP) human protection guideline. While conductivities(${\sigma}$) and relative permittivities(${\varepsilon}_r$) of the human tissues for each frequency were input as the analyzing parameters, electric field intensities near both hands were integrated along the integral line between the nearby electrodes for the calculation of the transmitting and receiving voltages whose ratio was defined as channel loss. The calculated channel losses were about ($75{\pm}1$) dB and showed nearly flat response all through the evaluated frequencies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.71-80
• /
• 2013

According to design specifications for structural safety, a bridge in initial design step has been modelled to have larger self-weight, external loads and less stiffness than those of real one in service. Thereby measured buffeting responses of existing bridge show different distributions from those of the design model in design step. In order to obtain accurate buffeting responses of the in-site bridge, the analysis model needs to be modified by considering the measured natural frequencies. Until now, a Manual Tuning Method (MTM) has been widely used to obtain the Measurement-based Model(MBM) that has equal natural frequencies to the real bridge. However, since state variables can be selected randomly and its result is not apt to converge exact rapidly, MTM takes a lot of effort and elapsed time. This study presents Buffeting Response Correction Method (BRCM) to obtain more exact buffeting response above MTM. The BRCM is based on the idea the commonly used frequency domain buffeting analysis does not need all structural properties except mode shapes, natural frequencies and damping ratio. BRCM is used to improve each modal buffeting responses of the design model by substituting measured natural frequencies. The measured natural frequencies are determined from acceleration time-history in ordinary vibration of the real bridge. As illustrated examples, simple beam is applied to compare the results of BRCM with those of a assumed MBM by numerical simulation. Buffeting responses of BRCM are shown to be appropriate for those of in-site bridge and the difference is less than 3% between the responses of BRCM and MTM. Therefore, BRCM can calculate easily and conveniently the buffeting responses and improve effectively maintenance and management of in-site bridge than MTM.

• Korean Journal of Environment and Ecology
• /
• v.20 no.3
• /
• pp.331-339
• /
• 2006

Inhabitant patterns of the legally protected species and the characteristics of fish fauna in the Pyeongchang River, Korea, were studied from April to July 2004 by selecting 6 sites. The number of fish samples in this period were 2,448 in 35 species of 9 families. A total of nineteen endemic species (54.29%) were presented and those were Hemibarbus mylodon and Acheilognathus signifer. The highest frequency was shown in Zacco korean us (34.84%) and Pungtungia herzi (10.25%) and Coreoleuciscus splendidus (6.86%) were the next. In addition, The highest biomass was found in Z. koreanus (5,580.2g) and Coreoperca. herzi (1.241.2g) and C. splendidus (1,207.0g) were the next. When comparing the distribution of the legally protected species in within the Han River system, the highesting distributions were determined in the Pyeongchang and Dong River (6 species). The ratio of individuals in the Pyeongchang River was shown to be higher (10.62%) than that of other lakes and streams. In conclusion, more precise protection and protective plans were needed in order to maintain the lake ecology in good status because the Pyeongchang River is relatively well protected from the anthropogenic disturbance in the legally protected species including the endemic species.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1945-1954
• /
• 2020

Subchannel code is one of the effective simulation tools for thermal-hydraulic analysis in nuclear reactor core. In order to reduce the computational cost and improve the calculation efficiency, empirical correlation of turbulent mixing coefficient is employed to calculate the lateral mixing velocity between adjacent subchannels. However, correlations utilized currently are often fitted from data achieved in central channel of fuel assembly, which would simply neglect the wall effects. In this paper, the CFD approach based on spectral element method is employed to predict turbulent mixing phenomena through gaps in 3 × 3 bare tight lattice rod bundle and investigate the flow pulsation through gaps in different positions. Re = 5000,10000,20500 and P/D = 1.03 and 1.06 have been covered in the simulation cases. With a well verified mesh, lateral velocities at gap center between corner channel and wall channel (W-Co), wall channel and wall channel (W-W), wall channel and center channel (W-C) as well as center channel and center channel (C-C) are collected and compared with each other. The obvious turbulent mixing distributions are presented in the different channels of rod bundle. The peak frequency values at W-Co channel could have about 40%-50% reduction comparing with the C-C channel value and the turbulent mixing coefficient β could decrease around 25%. corrections for β should be performed in subchannel code at wall channel and corner channel for a reasonable prediction result. A preliminary analysis on fluctuation at channel gap has also performed. Eddy cascade should be considered carefully in detailed analysis for fluctuating in rod bundle.

• Journal of the Korean Geographical Society
• /
• v.37 no.4
• /
• pp.385-402
• /
• 2002

This study examined temporal and spatial patterns of bioclimatic perceived sultriness in South Korea by analyzing the climatology of heat index calculated from ambient temperature and relative humidity for the period of 26 years (1973-1998). As results, spatially, bioclimatic sultriness above all thresholds frequently occurred mainly in the central western inner area, the southwestern inner area, and the southeastern inner area of South Korea. Especially, Miryang in the southeastern inner area of South Korea was proved to be, bioclimatically, the sultriest area in South Korea that has recorded frequent high heat index. Temporally, frequency of sultriness in the contiguous South Korea significantly increased in the 1990s. Specifically, In 1994, frequencies of heat index exceeding each threshold was the highest all over South Korea. Normally, the sultriness with high heat index exceeding 40.6$^{circ}C$ occurred mainly for the period of between the end of July generally after Summer Changma and the beginning of August before another small rainy season of years. These temporal-spatial distributions of bioclimatic sultriness in South Korea showed various patterns regionally, affected by physical and anthropogenic climatic factors such as topography, latitude, altitude, water bodies or aforestration, urbanization, and industrialization as well as movements of large-scale air masses.

• Korean Journal of Biological Psychiatry
• /
• v.6 no.2
• /
• pp.170-175
• /
• 1999

Until recently, the etiology of schizophrenia was generally attributed to abnormalities in dopaminergic neurotransmission. Specifically, an excess of dopaminergic activity in the mesolimbic system has been postulated to produce the positive symptoms, while decreased dopaminergic activity in the mesocortical system has been suggested to cause negative symptoms. Accordingly, we performed an association study of schizophrenia with TH gene. Three hundred and seventy four biologically unrelated schizophrenic patients meeting DSM-III-R criteria from Kangnam St. Mary's Hospital affiliated with Catholic university of Korea were recruited for our study. The 393 healthy controls were volunteers for DNA library of Kangnam St. Mary's Hospital without personal or family history of psychiatric and neurologic illness. DNA was extracted from peripheral mononuclear cells and polymorphic region was amplified by polymerase chain reaction. TH intron 1 VNTR polymorphism was typed by silver staining. The allele distributions of TH gene were not different between schizophrenics and controls. However, the frequency of allele A was significantly higher in positive group than that of negative group of schizophrenics. These findings suggest that poitive schizophrenia may be associated with allele A of TH gene.

• Journal of Korea Water Resources Association
• /
• v.45 no.5
• /
• pp.505-516
• /
• 2012

The study applies a hydrologic simulation model, HEC-1 developed by Hydrologic Engineering Center to Daecheong dam watershed for modeling hourly inflows of Daecheong dam. Although the HEC-1 model provides an automatic optimization technique for some of the parameters, the built-in optimization model is not sufficient in estimating reliable parameters. In particular, the optimization model often fails to estimate the parameters when a large number of parameters exist. In this regard, a main objective of this study is to develop Bayesian Markov Chain Monte Carlo simulation based HEC-1 model (BHEC-1). The Clark IUH method for transformation of precipitation excess to runoff and the soil conservation service runoff curve method for abstractions were used in Bayesian Monte Carlo simulation. Simulations of runoff at the Daecheong station in the HEC-1 model under Bayesian optimization scheme allow the posterior probability distributions of the hydrograph thus providing uncertainties in rainfall-runoff process. The proposed model showed a powerful performance in terms of estimating model parameters and deriving full uncertainties so that the model can be applied to various hydrologic problems such as frequency curve derivation, dam risk analysis and climate change study.