• Journal of information and communication convergence engineering
• /
• 제3권3호
• /
• pp.119-121
• /
• 2005

This paper aims to estimate the delay time of multiple signals in a multi-path environment. It also seeks to carry out a comparative analysis with the existing delay time under the proposed algorithm to develop a new algorithm that applies the space average method in a MUSIC algorithm. Unlike the existing delay time estimation algorithm, the developed algorithm was able to estimate the delay time in 5ns low. Therefore, the algorithm proposed in this paper improved the existing delay time estimated algorithm.

• KIEE International Transaction on Systems and Control
• /
• 제2D권2호
• /
• pp.92-96
• /
• 2002

This paper is concerned with properties of a Lyapunov functional of state delay systems. It is shown that if a state delay system has a pure imaginary pole for some state delay, then no Lyapunov functional satisfying a Lyapunov condition exists periodically with respect to change of the state delay. This periodic property is unique in state delay systems and has been well known in the frequency domain stability conditions. However, in the time domain stability conditions using a Lyapunov functional, the periodic property is not known explicitly.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.259-262
• /
• 2012

본 논문에서는 125 MHz 동작 주파수에서 64개 위상의 클럭을 출력하는 지연 고정 루프 (DLL: delay-locked loop)을 제안한다. 제안된 다중 지연 고정 루프는 delay line의 선형성을 개선하기 위해 $4{\times}8$ matrix 구조의 delay line을 사용한다. CMOS multiplexer와 inverter-based interpolator를 이용하여 $4{\times}8$ matrix 기반의 delay line에서 출력된 32개 위상의 클럭으로부터 64개 위상의 클럭을 생성한다. 또한 DLL에서 harmonic lock을 방지하기 위해 클럭의 duty cycle ratio에 무관한 initial phase locking을 위한 회로가 제안된다. 제안된 지연 고정 루프는 1.8 V의 공급전압을 이용하는 $0.18-{\mu}m$ CMOS 공정에서 설계된다. 시뮬레이션된 DLL은 40 MHz에서 200 MHz의 동작 주파수 범위를 가진다. 125 MHz 동작 주파수에서 최악의 위상 오차와 jitter는 각각 +11/-12 ps와 6.58 ps이다.

• 전자공학회논문지SC
• /
• 제47권6호
• /
• pp.1-5
• /
• 2010

본 논문에서는 PI 제어기를 설계해야 하는 경우인 임계 주파수 부근에서 이득 감소가 적은 시스템을 구별할 수 있는 알고리즘을 제안하였다. 임계 주파수 부근에서 이득감소가 적은 시스템을 구별하기 위해 시간 지연 요소를 이용하여 이득 감소율을 구하는 방법을 제안하였다. 또한 크기 마진과 위상 마진이 주어진 경우 PI 제어기를 설계하는 방법을 제안하였다. 제안된 알고리즘은 시간 지연요소와 포화함수를 이용하여 PI 제어가 가능한 한점의 좌표값을 계산하는 방법을 사용하였다. 제안된 방법은 시뮬레이션을 통해 타당성을 검증하였다.

• 한국통신학회논문지
• /
• 제30권10A호
• /
• pp.930-937
• /
• 2005

본 논문에서는 LBT-Serial Searching 방식을 채용한 RFID(Radio Frequency Identification)시스템의 트래픽 처리 시간 및 주파수 채널 용량 분석을 위한 알고리즘을 제시하였다. 서비스 시간, 주파수 채널 탐색시간, 연속적인 주파수 채널 사용에 따른 지연시간, 연속적인 동일 주파수 채널 사용에 따른 지연시간을 고려하여 정상상태에서의 트래픽 처리 지연시간을 산출하였다. 모의실험을 통하여 최대처리 가능한 트래픽 용량 및 주파수 채널수를 평가하고, 제안된 분석 알고리즘 정확성을 입증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.837-843
• /
• 2006

As environmental vibration requirements on precision equipment become more stringent, use of pneumatic isolators has become more popular and their performance is subsequently required to be further improved. Performance of passive pneumatic isolators is related to various design parameters in a complicated manner and, hence, is very limited especially in low frequency range by chamber volume. In this study, transmissibility behavior of the pneumatic isolators depending on frequency and dynamic amplitude are presented. Then, an active control technique, time delay control, which is adequate for a low frequency nonlinear system, is applied. A procedure of applying the time delay control law to a pneumatic isolator is presented and it's effectiveness in the transmissibility performance is shown. Comparison between passive and active pneumatic isolators is made based on simulation.

• Journal of Communications and Networks
• /
• 제4권3호
• /
• pp.176-188
• /
• 2002

This paper presents results of continuous wave and swept frequency response measurements over the frequency range of UNII lower and middle bands from 5.15GHz to 5.35GHz in indoor environments. From the continuous wave measurements at 5.2GHz, the excess path loss, and the statistical characteristics of the temporal and spatial fading were found. By sweeping the frequency over the band, envelope correlation as a function of frequency was found and the coherence bandwidth (CBW) was determined from the envelope correlation. Using a channel model, the CBW was used to evaluate RMS delay spread. The dependence of CBW on the antenna polarization was simulated and compared with the measurement results. The influence of room size and separation of transmitter and receiver for LOS paths on RMS delay spread was discussed.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.135-137
• /
• 2002

In the favor of adjusting microwave signal, Hairpin type Filter, which delay microwave signal enough to several nanosecond, is a key component. One of the main advantage in using Hairpin type Filter is a conveniency for equipping with Delay Module, and because of having a wide bandwidth, Hairpin type Filter can be designed to satisfy the most applications. In this work, we attempted to estimate the delay time in a superconductive hairpin type filter A software to synthesize even and odd order equiripple hairpin type filter has been developed. This software arbitrarily locate its transfer zeros making symmetric of asymmetric amplitude response and equalizing group delay. Borland C++ compiler has been used. The program was designed to run under MS-DOS, Window 98, Window 2000. The program optimizes the position of the transfer function zeros in order to fulfill the group delay specification masks. We designed and fabricated a hairpin type HTS 2-pole microstrip bandpass filter to operate at 5.8Ghz. The fabrication method was pulsed laser deposition and YBCO films were deposited on sapphire substrates with a Ce$O_{2}$ thin layer as a buffer layer. We also developed a new style hairpin type filter by using interdigitide inner-pole. Compared to the same size regular hairpin type filters, our filters had a lower center frequency.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.362-379
• /
• 2015

In this study, Nuclear Power Plant (NPP) construction schedule delay risk assessment methodology is developed and the construction delay risk is assessed for turnkey international NPP projects. Three levels of delay factors were selected through literature review and discussions with nuclear industry experts. A questionnaire survey was conducted on the basis of an analytic hierarchy process (AHP) and Relative Importance Index (RII) methods and the schedule delay risk is assessed qualitatively and quantitatively by severity and frequency of occurrence of delay factors. This study assigns four main delay factors to the first level: main contractor, utility, regulatory authority, and financial and country factor. The second and the third levels are designed with 12 sub-factors and 32 sub-sub-factors, respectively. This study finds the top five most important sub-sub-factors, which are as follows: policy changes, political instability and public intervention; uncompromising regulatory criteria and licensing documents conflicting with existing regulations; robust design document review procedures; redesign due to errors in design and design changes; and worldwide shortage of qualified and experienced nuclear specific equipment manufacturers. The proposed combined AHP-RII methodology is capable of assessing delay risk effectively and efficiently. Decision makers can apply risk informed decision making to avoid unexpected construction delays of NPPs.

• 한국분무공학회지
• /
• 제25권3호
• /
• pp.119-125
• /
• 2020

In this paper, we used Helmholtz solver based on 3D finite element method to quantitatively analyze the effects of change of gain, time delay and time delay spread, which are the main variables of flame transfer function, on combustion instability in gas turbine combustor. The effects of the variable of flame transfer function on the frequency and growth rate, which are the main results of combustion instability, were analyzed by applying the conventional heat release fluctuation model and modified one considering the time spread. The analysis results showed that the change of gain and time delay in the same resonance mode affected the frequency of the given resonance modes as well as growth rate of the feedback instability, however, the effect of time delay spread was not relatively remarkable, compared with the dominant effect of time delay.