• Clinical and Experimental Pediatrics
• /
• v.51 no.1
• /
• pp.73-77
• /
• 2008

Purpose : p16 gene, mapped to the 9p21 chromosomal region, has emerged as a candidate tumor suppressor gene in human neoplasm. It is an inhibitor of cyclin-dependent kinase and inhibits Rb phosphorylation. In a variety of tumors including childhood acute lymphoblastic leukemia (ALL), deletion and/or mutation of the p16 gene has been found. Despite their high frequency, the prognostic importance of p16 alterations is still controversial in ALL and has been reported to be either unfavorable or similar to that of other patients. We studied the correlation between loss of p16 protein confirmed by immunohistochemical staining and clinical outcomes of patients diagnosed as ALL. Methods : We performed an immunohistochemical staining for p16 protein in 74 cases of bone marrow biopsy slide initially diagnosed as ALL between January 1998 and December 2006. We reviewed the clinical manifestations, laboratory findings, treatment outcomes retrospectively. Results : Of 74 slides, 12 were negative for p16 protein. Seven were males and 5 were females with a median age at diagnosis was 5.8 (1.3-18.8) years. Initial WBC were 17,225 $(500-403,300)/{\mu}L$. By immunologic surface marker analysis, 7 patients were early pre-B CALLA (+) and 5 patients were T-cell ALL. Two patients of intermediate risk group had relapsed and died. Three patients had family history of breast cancer. Four patients died and overall survival rates were $53.5{\pm}18.7%$. Conclusion : Loss of p16 protein is supposed to be an independent risk factor of childhood ALL associated with poor outcomes. In clinical setting, the clinician must take into account p16 status, not only at the genomic but also at the protein level. Further clinical experience on thoroughly investigated cases will help a better understanding between p16 status and clinical outcomes.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.6
• /
• pp.853-869
• /
• 2000

Background : Following several decades of decline, the incidence of tuberculosis has recent1y begun to increase in many countries of this the control of this disease has been impeded by the emergence of multi-drug resistant tuberculosis (MDR-TB). The development of rapid diagnostic methods and effective new drugs are needed to control MDR-TB. One of the new drugs for MDR-TB is rifabutin (RBU) which has been known to be effective in some patients with MDR-TB. A few reports showed that some types of mutations of the rpoB gene, which were known to be present in 96-98% of rifampicin-resistant M. tuberculosis, were associated with the rifampicin-resistant but RBU-susceptible phenotype. This study was performed to investigate the correlation between RBU susceptibility and the patterns of rpoB gene mutations in Korean MDR-TB. Methods : Sixty-five clinical isolates of multi-drug resistant Mycobacterium tuberculosis, gathered from patients who visited the Asan Medical Center from July 1997 to June 1999, were investigated. Clinical responses to rifabutin-containing regimen were evaluated. An RBU susceptibility test and sequencing analysis of rpoB gene were performed, and the results were analyzed to confirm which mutations correlated with RBU-susceptible MDR-TB. Results : Fifty-three of 56 (95%) clinical isolates of MDR-TB had 60 mutations of the rpoB gene. The most frequent mutations were found at codon 531 (43%), and two mutations were combined in seven clinical isolates. Five of 53 (10%) clinical isolates showed the RBU-susceptible phenotype, and in them the characteristic patterns of point mutations were found at codon 509, 516, and 526. Conclusion : The frequency and pattern of mutations of the rpoB gene of Korean MDR-TB isolates were similar to those in western countries, where the prevalence of tuberculosis is low, but some show RBU-susceptible phenotypes. RBU-susceptible MDR-TB isolates showed the characteristic pattern of mutations of the rpoB gene which could be used to rapidly diagnose RBU susceptibility.

• Clinical and Experimental Pediatrics
• /
• v.52 no.3
• /
• pp.356-363
• /
• 2009

Purpose : A polymorphism in the IGF-I gene promoter region is known to be associated with serum IGF-I levels, birth weight, and body length, suggesting that IGF-I gene polymorphism might influence postnatal growth. The present study aimed to investigate the role of this polymorphic cytosine-adenine (CA) repeat of the IGF-I gene in children with idiopathic short stature. Methods : The study involved 131 children (72 boys and 59 girls) diagnosed with idiopathic short stature, aged 715 years. Genomic DNA was extracted from anticoagulated peripheral whole blood. The primers were designed to cover the promoter region containing the polymorphic CA repeat. Data were analyzed using GeneMapper software. The correlations between age and serum IGF-I levels were analyzed using Spearmans correlation coefficient. Results : The CA repeat sequences ranged from 15 to 22, with 19 CA repeats the most common with an allele frequency of 40.6%. Homozygous for 19 CA repeat was 13.0%, heterozygous for 19 CA repeat was 56.5%, and 19 CA non-carrier was 30.5%. The three different genotype groups showed no significant differences in height, body weight and body mass index, and serum IGF-I levels. The serum IGF-I level and age according to the IGF-I genotypes were significantly correlated in the entire group, 19 CA repeat carrier group, and the non-carrier group. The three groups also showed no significant differences in the first year responsiveness to GH treatment. Conclusion : There were no significant different correlations between 19 CA repeat polymorphism and serum IGF-I levels according to genotype. Our results suggest that the IGF-I 19 CA repeat gene polymorphism is not functional in children with idiopathic short stature.

• Journal of dental hygiene science
• /
• v.9 no.4
• /
• pp.453-459
• /
• 2009

The purposes of this research were to evaluate the relationships of between characteristics of noise and annoyance of dental hygienist by noise in dental clinic. To investigate the dental clinic workers' reactions to noise when occurred in dental clinic, the noise level test in dental clinic and questionnaire were taken. As a result of noise evaluation, It shows that the range of noise level was 67.7~78.3dB(A) and frequency was very high (more than 4KHz). It's seem to be begins occurrence of stamina-loss, contraction of peripheral blood vessel, decrease of adrenocortical hormones. Most of respondents were affected by noise: 67% of respondents were nervous about noise and the rest of respondents were bearable. Analysis by NR-curve showed that it was exceed the noise permit level in working space. As a result of correlation - test, the more exposed dental hygienist to noise, the more felt the unpleasantness and fatigue. It's hard to sufficient explanation to patients about the dental treatment. So it's thoughts that insufficient explanation will negative impact on the patients' satisfaction and increase competitiveness in dental clinics. To remedy a unpleasantness and fatigue of noise in dental hygienist, it's considered that making an offer the ear protection and choosing the low noise-vib. equipment and using the masking effect. Therefore, It can be provide a pleasant working environment with dental hygienist and It will have a great advantage to dental clinics to improve their competitiveness.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.12 no.2
• /
• pp.163-170
• /
• 2009

Purpose: Intussusception is the most common cause of intestinal obstruction in young children. Although intussusceptions are easily treated, some intussusceptions with or without a pathologic lead point (PLP) often recur. In this study, we analyzed the clinical characteristics and prognosis of recurrent intussusceptions (RI), the frequency of the PLP, and correlation between RI with PLP. Methods: The medical records of 144 patients, among 590 patients with intussusceptions who had been admitted to the Department of Pediatrics and Pediatric Surgery of Dankook University Hospital between May 1994 and June 2009 were reviewed retrospectively. Results: The overall recurrence rate of intussusceptions in this study was 9.2%. The mean interval between the initial occurrence and the first recurrent attack was 130${\pm}$175 days (range, 12 hours to 3 years). There was no statistically significant difference in the recurrence rate among patients who underwent air, barium, and manual reduction (p=0.131). Eighty-seven cases (92.6%) of RI had a successful reduction by the use of non-operative techniques. A PLP was present in 18 patients (3.0%). The most common PLP was intestinal lymphoid hyperplasia, followed by Meckel's diverticulum, duplication cyst, intestinal polyp, and adenomyoma. The mean number of intussusceptions was 4.7${\pm}$1.9 in 7 patients with PLP, which was significantly higher than (2.4${\pm}$0.9) patients without a PLP (p=0.023). The mean duration of recurrences was 17.4${\pm}$19.8 months (range, 2 days to 72 months). Conclusion: A careful search for a PLP should be performed to prevent recurrence of intussusception, especially when intussusception has recurred more than three times.

• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.87-106
• /
• 2005

In order to evaluate the mechanism of transmission as well as processing of sensory information originating from low-threshold mechanoreceptor in oral and maxillofacial region at primary synaptic region of trigeminal nervous system, vibrissa afferent fibers of adult cat were labeled with intra-axonal HRP injection. Serial sections containing labeled boutons were obtained from the piece of trigeminal interpolar nucleus. Under electron microscope, total 30 labeled boutons were observed, and ultrastructural characteristics, frequency of occurence, synaptic organizations of vibrissa afferent terminals were analysed. The results were as follows: 1. Labeled boutons contained clear, spherical synaptic vesicles with diameter of 45$\sim$55nm. They formed asymmetrical synapse with dendrites showing definite postsynaptic density, larger synaptic cleft, multiple synaptic structures at various regions. With unlabeled axon terminals(p-ending) containing polymorphic synaptic vesicles, they formed symmetrical synapse showing indefinite postsynaptic density and narrower synaptic area. 2. Each labeled bouton formed 1 to 15 synapses, the average of 4.77$\pm$3.37 contacts per labeled bouton, with adjacent neuronal profiles. Relatively complex synaptic organization, which formed synapses with more than 5 neuronal profiles, was observed in a large number(46.7%, n=14) of labeled boutons. 3. Axo-somatic synapse was not observed. The number of axo-dendritic synapse was 1.83$\pm$1.37 per labeled bouton. Majority(85.0%) of axo-dendritic synapses were formed with dendritic shafts, nonprimary dendrites(n=47, 1.57$\pm$1.38/1 bouton), however, synapses formed with primary dendrites(n=6, 0.20$\pm$0.41/1 bouton) or dendritic spines(n=2, 0.07$\pm$0.25/1 bouton) were rare. 4. 76.7%(n=23) of labeled boutons formed axo-axonic synapse (2.93$\pm$2.36/1 bouton) with p-endings containing pleomorphic vesicles. Synaptic triad, in which p-endings formed synapses with labeled boutons and dendrites adjacent to the labeled boutons simultaneoulsy, were also observed in 60.0%(n=18) of labeled boutons. From the above results, vibrissa afferent terminals of adult cat showed distinctive synaptic organization in the trigeminal interpolar nucleus, thus, suggests their correlation with the function of the trigeminal interpolaris nucleus, which participates in processing of complex sensory information such as two-point discrimination and motivational-affective action. Further studies on physiologic functions such as quantitative analysis on ultrastructures of afferent terminals and nerve transmitters participating in presynaptic inhibition are required.

• Clinical and Experimental Pediatrics
• /
• v.52 no.11
• /
• pp.1228-1233
• /
• 2009

Purpose : This study aimed to evaluate whether a shorter time from the arrival at a hospital to delivery is related to the occurrence of cerebral palsy in premature infants of less than 34 weeks of gestational age. Methods : We studied 142 newborns of less than 34 weeks of gestational age. The time from the arrival at the hospital to delivery was measured. The correlation between the time required for delivery and the occurrence of cerebral palsy was elucidated by diagnosing cerebral palsy in neonates using the Korean Infant Development Screening Test and neurological examination. Results : Preliminary result suggested that a shorter time from hospital arrival to delivery was related to a lower development score for gross motor activity and to a higher frequency of cerebral palsy occurrence. Moreover, it was responsible for a tendency of obtaining lower Apgar scores at 1 and 5 minutes. The shorter delivery time was associated with a higher probability of respiratory distress syndrome (RDS) occurrence when the length of delivery time was less than 6 hours and there was a higher probability of a shorter gestation period. However, the multifactor analysis revealed that there was little impact of delivery time on the occurrence of cerebral palsy. Conclusions : The length of hospital arrival time to delivery did not significantly influence the occurrence of cerebral palsy in premature infants of less than 34 weeks of gestational age.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.191-207
• /
• 2021

Up to this day, mobile communications have evolved rapidly over the decades, mainly focusing on speed-up to meet the growing data demands of 2G to 5G. And with the start of the 5G era, efforts are being made to provide such various services to customers, as IoT, V2X, robots, artificial intelligence, augmented virtual reality, and smart cities, which are expected to change the environment of our lives and industries as a whole. In a bid to provide those services, on top of high speed data, reduced latency and reliability are critical for real-time services. Thus, 5G has paved the way for service delivery through maximum speed of 20Gbps, a delay of 1ms, and a connecting device of 106/㎢ In particular, in intelligent traffic control systems and services using various vehicle-based Vehicle to X (V2X), such as traffic control, in addition to high-speed data speed, reduction of delay and reliability for real-time services are very important. 5G communication uses high frequencies of 3.5Ghz and 28Ghz. These high-frequency waves can go with high-speed thanks to their straightness while their short wavelength and small diffraction angle limit their reach to distance and prevent them from penetrating walls, causing restrictions on their use indoors. Therefore, under existing networks it's difficult to overcome these constraints. The underlying centralized SDN also has a limited capability in offering delay-sensitive services because communication with many nodes creates overload in its processing. Basically, SDN, which means a structure that separates signals from the control plane from packets in the data plane, requires control of the delay-related tree structure available in the event of an emergency during autonomous driving. In these scenarios, the network architecture that handles in-vehicle information is a major variable of delay. Since SDNs in general centralized structures are difficult to meet the desired delay level, studies on the optimal size of SDNs for information processing should be conducted. Thus, SDNs need to be separated on a certain scale and construct a new type of network, which can efficiently respond to dynamically changing traffic and provide high-quality, flexible services. Moreover, the structure of these networks is closely related to ultra-low latency, high confidence, and hyper-connectivity and should be based on a new form of split SDN rather than an existing centralized SDN structure, even in the case of the worst condition. And in these SDN structural networks, where automobiles pass through small 5G cells very quickly, the information change cycle, round trip delay (RTD), and the data processing time of SDN are highly correlated with the delay. Of these, RDT is not a significant factor because it has sufficient speed and less than 1 ms of delay, but the information change cycle and data processing time of SDN are factors that greatly affect the delay. Especially, in an emergency of self-driving environment linked to an ITS(Intelligent Traffic System) that requires low latency and high reliability, information should be transmitted and processed very quickly. That is a case in point where delay plays a very sensitive role. In this paper, we study the SDN architecture in emergencies during autonomous driving and conduct analysis through simulation of the correlation with the cell layer in which the vehicle should request relevant information according to the information flow. For simulation: As the Data Rate of 5G is high enough, we can assume the information for neighbor vehicle support to the car without errors. Furthermore, we assumed 5G small cells within 50 ~ 250 m in cell radius, and the maximum speed of the vehicle was considered as a 30km ~ 200 km/hour in order to examine the network architecture to minimize the delay.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.175-190
• /
• 1994

In order to get fundamental information for prediction of landslide hazard, both forest and site factors affecting slope stability were investigated in many areas of active landslides. Twelve descriptors were identified and quantified to develop the prediction model by multivariate statistical analysis. The main results obtained could be summarized as follows : The main factors influencing a large scale of landslide were shown in order of precipitation, age group of forest trees, altitude, soil texture, slope gradient, position of slope, vegetation, stream order, vertical slope, bed rock, soil depth and aspect. According to partial correlation coefficient, it was shown in order of age group of forest trees, precipitation, soil texture, bed rock, slope gradient, position of slope, altitude, vertical slope, stream order, vegetation, soil depth and aspect. The main factors influencing a landslide occurrence were shown in order of age group of forest trees, altitude, soil texture, slope gradient, precipitation, vertical slope, stream order, bed rock and soil depth. Two prediction models were developed by magnitude and frequency of landslide. Particularly, a prediction method by magnitude of landslide was changed the score for the convenience of use. If the total store of the various factors mark over 9.1636, it is evaluated as a very dangerous area. The mean score of landslide and non-landslide group was 0.1977 and -0.1977, and variance was 0.1100 and 0.1250, respectively. The boundary value between the two groups related to slope stability was -0.02, and its predicted rate of discrimination was 73%. In the score range of the degree of landslide hazard based on the boundary value of discrimination, class A was 0.3132 over, class B was 0.3132 to -0.1050, class C was -0.1050 to -0.4196, class D was -0.4195 below. The rank of landslide hazard could be divided into classes A, B, C and D by the boundary value. In the number of slope, class A was 68, class B was 115, class C was 65, and class D was 52. The rate of landslide occurrence in class A and class B was shown at the hige prediction of 83%. Therefore, dangerous areas selected by the prediction method of landslide could be mapped for land-use planning and criterion of disaster district. And also, it could be applied to an administration index for disaster prevention.