• 대한조선학회지
• /
• 제25권3호
• /
• pp.19-25
• /
• 1988

The three-dimensional boundary value problem for the unsteady motion of a ship which is translating and oscillating on the free surface of a deep water formulated. Under the assumption that the forward speed is small and order of $\varepsilon$, all formulations are made up to the first order of $\varepsilon$. For the numerical calculation, the three-dimensional source distribution method is applied, and the triangular elements are used to represent the hull surface. The results for the added mass and the damping coefficient for Series 60, $C_B=0.7$ at Fn=0 and Fn=0.2 shows good agreements with those of Inglis, Chang, and Inglis and Price.

• International Journal of Internet, Broadcasting and Communication
• /
• 제6권1호
• /
• pp.9-12
• /
• 2014

We present a mathematical method for calculation of transmission zero locations, determining a filtering characteristics of two-port systems. By adjusting element values based on the zero locations, the frequency-selectivity is characterized. The characteristic polynomial of ladder networks in externally-loaded feed-forward systems is considered by adopting chain matrices for subsystems. This method can be extended to other types of lumped systems with cross-coupled sections. We find out the zeros by solving characteristics polynomials of closed-form expressions in terms of Laplace impedances of elements. The pairs of complex zeros are shown to be solely from the cross-coupled portion of the system.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제3권1호
• /
• pp.14-22
• /
• 2000

The improved Green integral equation for the calculation of time-harmonic potentials in the radiation diffraction problem about a freely floating body in the presence of moderate or weak current is presented. The forward-speed Green function presented by Brard is used. The correct free surface boundary conditions on the physical free surface are employed as well as an appropriate boundary conditions on the non-physical inner free surface. The default in the existing Green integral equation as well as in the source integral equation is discussed in detail.

• 한국연초학회지
• /
• 제4권2호
• /
• pp.57-61
• /
• 1982

For evaluating kinetic parameters of various reactions and materials a straight- forward method has been studied by the variable heating rate method in DSC analysis. Based on the linear relationship between the logarithm of the heating rate and reciprocal Peak temperature, this method allows calculation of activation energy and the Arrhenius frequency factor by only one observation of the peak temperature versus the heating rate. According to tile D function, D=-In P(x)/dx, to x(=$\frac{E}{RT}$) we can calculate reasonably accurate activation energy, tile Arrhenius factor and the rate constant, and predict half-life times of various materials from the kinetic calculation.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.21-26
• /
• 2003

The reel-lay method of submarine pipelines a continuous string of pipe coiled onto a reel. Assembly of this pipe that is string is accomplished onshore by welding, and nondestructive testing is carried out prior to coiling the pipe. The total length of pipes on the reel depends on the reel and pipe diameters. Pipeline installation is accomplished by uncoiling, straightening the pipe, and laying out the pipe string onto the seabed as the barge moves forward. Installation associated with coiling and uncoiling is related to the bending moment and strain relationship of the pipeline, A highgrade pipe material is required when the reel-lay method is used. This paper is concerned with the highly plastic bending moment of the pipeline, including the effect of ovality. Moment calculation in the pipe is accomplished by the numerical method, including the variable ovalities during the plastic bending of the pipe string. The new calculation method of the high plastic bending moment was applied to the reel-lay method.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.415-421
• /
• 2006

The unsteady flow calculation around the proprotor of Smart UAV was conducted. Using the flight scenario of SUAV which composed of hover, transition, and airplane mode, the aerodynamic analysis of proprotor were performed for the variation of collective pitch, rpm, forward speed, and tilt angle. The unsteady compressible Navier-Stokes equations were used for the calculation and the dynamic overset grid technique was applied for the rotating proprotor. The aerodynamic performance of proprotor calculated in this way were validated by comparing with the performance data obtained from the blade element momentum method.

• 수산해양기술연구
• /
• 제28권2호
• /
• pp.228-239
• /
• 1992

The purpose of the present research is to develop an efficient numerical method for the calculation of potential flow and predict the wave-making resistance for the application to ship design of tuna purse seiner. The paper deals with the numerical calculation of potential flow around the series 60 with forward velocity by the new slender ship theory. This new slender ship theory is based on the asymptotic expression of the Kelvin-source, distributed over the small matrix at each transverse section so as to satisfy the approximate hull boundary condition due to the assumption of slender body. Some numerical results for series 60, C sub(b) =0.6, hull are presented in this paper. The wave pattern and wave resistance are computed at two Froude numbers, 0.267 and 0.304. These results are better than those of Michell's thin ship theory in comparison with measured results. However, it costs much time to compute not only wave resistance but also wave pattern over some range of Froude numbers. More improvements are strongly desired in the numerical procedure.

• 조명전기설비학회논문지
• /
• 제28권6호
• /
• pp.7-14
• /
• 2014

We proposed a new algorithm to improve the calculation speed of forward ray tracing method which was quite a problem in conventional Monte Carlo algorithm. To verify the accuracy and the effect of improving calculation speed, we directly compared integrating sphere characteristics with conventional ray tracing algorithm under the same condition which was referred in a reference paper. By applying new algorithm to an absolute reflectometer, we calculated the degree of errors which were caused by baffle and port characteristics to find optimal system design condition.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권2호
• /
• pp.236-242
• /
• 2005

Dynamic Positioning(DP) system maintains ship's position (fixed location or predetermined track) exclusively by means of CPPs and thrusters. To generate the control input adequate to various situation an integrated controller for CPPs and thrusters is required. The integrated controller is composed of a thrust calculation algorithm and a thrust allocation algorithm. The thrust calculation algorithm generates thrusts in the surge direction and the sway direction from the desired forward and lateral speed and generates a moment about the yaw axis from desired heading angle. The thrust allocation algorithm allocates the generated thrusts and moment to each CPP and thruster. Computer simulations are executed to confirm the effectiveness of the suggested controller.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1289-1302
• /
• 2019

In this paper, an optimal allocation method of a hybrid active power filter in an active distribution network is designed based on the differential evolution algorithm to resolve the harmonic generation problem when a distributed generation system is connected to the grid. A distributed generation system model in the calculation of power flow is established. An improved back/forward sweep algorithm and a decoupling algorithm are proposed for fundamental power flow and harmonic power flow. On this basis, a multi-objective optimization allocation model of the location and capacity of a hybrid filter in an active distribution network is built, and an optimal allocation scheme of the hybrid active power filter based on the differential evolution algorithm is proposed. To verify the effect of the harmonic suppression of the designed scheme, simulation analysis in an IEEE-33 nodes model and an experimental analysis on a test platform of a microgrid are adopted.