• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.166-169
• /
• 2004

Microfiltration membranes were prepared from aromatic polyethersulfone (PES) polymer, using aprotic solvent (N-methyl-2-pyrrolidone, NMP) and non-solvent additive (2-methoxy ethanol, 2-ME) by the phase inversion co-process of the vapor-induced phase inversion (VIPI) and the nonsolvent-induced phase inversion (NIPI). According to the change of the additive amount, the solvent amount and the relative humidity, membrane characterization was studied. The non-solvent additive in casting solution played an important role in membrane morphology. During the vapor-induced phase inversion, the relative humidity led to water sorption on the surface of casting dope at which pore formation was generated. The prepared membranes were characterized by scanning electron microscope observations, measurements of capillary flow porometer and pure water flux (PWP). Also the thermodynamic and kinetic properties of membrane-forming system were studied through coagulation value, light transmittance and viscosity.

• 한국게임학회 논문지
• /
• 제14권2호
• /
• pp.55-66
• /
• 2014

영상 워핑은 입력 영상을 주어진 조건에 적합하게 변형하는 기술로, 최근 영화나 애니메이션 분야에서 캐릭터의 얼굴 형상을 변형하는데 활용되고 있다. 얼굴 특징을 기반으로 형상을 변형하는 워핑 방법 가운데 하나인 메쉬 워핑은 입력 영상에서 눈, 코, 입 주변의 사각형 모양의 메쉬 그룹을 형성하여 1:1정합시킴으로써 워핑 영상을 생성하는 방법이다. 이는 메쉬 제어점 좌표에 오차가 있거나 작은 면적의 메쉬로 세분화되어 생성된 경우 메쉬들의 경계 선분에서 결과 영상이 일그러지는 문제점이 있다. 본 연구는 얼굴의 자연스러운 워핑 영상을 생성하는 과정에서 오류 발생을 최소로 하며 정확한 결과를 적은 연산량과 시간에 처리하기 위해 삼각형기반의 영상 보간 기법을 제안한다. 우선 얼굴을 대표하는 특징점들을 찾고 이들을 연결하여 기본 삼각형 메쉬를 구성한다. 제안하는 방법은 기존의 메쉬 워핑과 비교하여 연산 처리량과 시간은 단축되면서 워핑 과정에서의 오류 발생을 줄일 수 있음을 실험으로 보인다.

• 치위생과학회지
• /
• 제20권4호
• /
• pp.245-251
• /
• 2020

Background: This study tries to compare and analyze the removal effect of dental plaque of general dentifrice and pregnant women's dentifrice and quantify the results to provide basic data so that consumers can make reasonable choices when purchasing dentifrice, and also increase interest in the dental plaque. Methods: After forming a dental plaque (carbohydrate porridge) on the labial surface of the bovine teeth, a disclosing agent was applied. Then the same experimenter brushed the surface of the bovine teeth using an electric toothbrush and took photographs using a DSLR camera. Thereafter, the residual amount of dental plaque was analyzed using the ImageJ program, and SPSS 26.0 was used for statistical processing. Results: The average residual amount of dental plaque using the general dentifrice was 11.71% for Perio, 9.45% for Cliden, and 8.47% for 2080, and the average residual amount for the three types was approximately 9.88%. The average residual amount of dental plaque of pregnant women's dentifrice was 13.95% for Jeninmothers, 12.53% for Tntnmoms, and 12.63% for Mommiracle, and the average residual amount of the three types was approximately 13.04%. On comparing the average residual amount of dental plaque between general and pregnant women's dentifrices, it was observed to be 3.16% higher for the latter. However, the results were not statistically significant. Conclusion: According to the research results, there was no significant difference in removal effects of general dentifrice and pregnant women's dentifrice. In addition, when a pregnant woman uses the right toothbrushing method with pregnant women's dentifrice, it can prevent or inhibit the progression of the gestational periodontal disease. Therefore, we recommend pregnant women to use pregnant women's dentifrices.

• 한국식품영양학회지
• /
• 제11권1호
• /
• pp.26-30
• /
• 1998

옥수수 기름의 탈취온도가 trans 지방산 생성량 및 그 조성에 미치는 영향을 GLC를 이용하여 측정하였다. 상대적으로 저온탈취인 240~25$0^{\circ}C$에서는 극미량의 trans 지방산만이 검출되었으나, 고온탈취인 255~27$0^{\circ}C$ 구간에서는 0.30, 0.57, 0.64 및 0.81%를 나타내었다. 이성화 현상은 이중결합수가 증가할수록 두드러졌으며, tt 및 ttt형은 거의 검출되지 않았는데 비하여 ct, cct 및 tcc형이 다량 검출되었다. 따라서, 탈취유의 이화학적 특성과 함께 이성체형성의 극소화는 저온탈취에 의하여 최대의 효과를 얻을 수 있음을 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권5호
• /
• pp.177-181
• /
• 2009

Employing statistical design of experiments, we have performed studies on the characterization of electrodes using $TiO_2$ and process variables in the fabrication process of nanocrystalline dye sensitized solar cell. Systematic experiment to identify the effects of process variables on cell's efficiency has based on broad-band absorption of light by tailor made organometallic dye molecules dispersed on a high surface of $TiO_2$. Employing statistical design of experiment on $TiO_2$ photoelectrode forming process, structural characterization of electrodes and process variable have been investigated. Through the statistical analysis we have found that the particle size of $TiO_2$ and the amount of PEG/PEO are significantly affecting on the cell efficiency. In addition, a significant amount of interaction exists between the particle size and the amount of PEG/PEO.

• 소성∙가공
• /
• 제15권4호
• /
• pp.295-303
• /
• 2006

Optimization is carried out to determine process parameters which reduce the amount of springback and improve shape accuracy of a deep drawn product in sheet metal forming process. The study uses the amount of stress deviation along the thickness direction in the deep drawn product as an indicator of springback instead of springback simulation. The scheme incorporates with an explicit elasto-plastic finite element method for calculation of the final shape and the stress deviation The optimization method adopts the response surface method in order to seek for the optimum condition of process parameters such as the blank holding force and the draw-bead force. The present scheme is applied to design of the variable blank holding force in an U-draw bending process and the application is further extend ε d to the design of draw-bead force in a front side member formed with advanced high strength steel (AHSS) sheets of DP60. Results show that design of process parameter is well performed to decrease the stress deviation through the thickness and to reduce the amount of springback. The present analysis provides a guideline in a design stage for controlling the springback based on the finite element simulation of the complicated parts.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 제5회 박판성형 SYMPOSIUM
• /
• pp.61-67
• /
• 2006

Optimization is carried out to determine process parameters which reduce the amount of springback and improve shape accuracy of a deep drawn product in sheet metal forming process. The study uses the amount of stress deviation along the thickness direction in the deep drawn product as an indicator of springback instead of springback simulation. The scheme incorporates with an explicit elasto-plastic finite element method for calculation of the final shape and the stress deviation. The optimization method adopts the response surface method in order to seek for the optimum condition of the draw-bead force. The present scheme is applied to the design of draw-bead force in a front side member formed with advanced high strength steel (AHSS) sheets of DP60. Results show that design of process parameter is well performed to decrease the stress deviation through the thickness and to reduce the amount of springback. The present analysis provides a guideline in a design stage for controlling the springback based on the finite element simulation of the complicated parts.

• 자원리싸이클링
• /
• 제2권2호
• /
• pp.39-44
• /
• 1993

어룡탄광에서 산출되는 저질인 무연탄 슬러리를 Oil agglomeration 처리법으로 탈수하여 다음과 같은 결과를 얻었다. 저질 무연탄은 기름과 응집체(COM)를 형성하여 물과의 비중차이에 의해서 약 80%까지 분리되고 이때 COM을 만드는 각각 석유, 경유 또는 중유의 첨가량은 시료량의 10%정도이다. 무연탄에서 가연성분을 회수하고 회분을 제거할 수 있는 능력은 기름의 첨가율, 광액 농도, 광립의 입도, 교반시간, 교반강도에 크게 영향을 받는다. 최적조건인 상태에서 가연물질의 회수율은 약 95%까지 증가되었고, 회분의 함유율은 30%에서 13.5%로 감소되었다.

• Design & Manufacturing
• /
• 제12권3호
• /
• pp.60-65
• /
• 2018

The production of the automotive parts with the ultra high strength steel usually involves large amount of springback as well as fracture during the cold stamping process. Variable blank holding force(VBHF) can be used as one of the effective process parameters to reduce the springback amount with achieving better condition of formability. In this paper, VBHF with respect to the punch stroke is applied to the stamping process of the front side rear lower member for reducing the springback amount. From the analyses with constant blank holding force(CBHF), 24 kinds of VBHF conditions are utilized to investigate the springback tendency. It is noted that springback can be effectively reduced when BHF is increased near the bottom dead center because VBHF provides the tensile force to the blank with an adequate level of deformation without fracture.

• 한국주조공학회지
• /
• 제14권6호
• /
• pp.530-540
• /
• 1994

Aluminium-silicon alloy(JIS AC8A) matrix composites reinforced with SiC particles were fabricated by spray-cast forming process, and the microstructure of powders and preforms produced were studied by using an optical and scanning electron microscopy. SiC particles were co-sprayed by mixed phase injection method during the spray casting process. Most of the composite powders formed by this mixed phase injection method exhibit morphology of particle-embedded type, and some exhibits the morphology of particle attached type due to additional attachment of the SiC particles on the surface of the powders in flight. The preforms deposited were resulted in dispersed type microstructure. The pre-solidified droplets and the deposited preform of SiC-reinforced aluminium alloy exhibit finer equiaxed grain size than that of unreinforced aluminium alloy. Eutectic silicons of granular type are crystallized at the corner of the aluminum grains in the preforms deposited, and some SiC particles seem to act as nucleation sites for primary/eutectic silicon during solidification. Such primary/eutectic silicons seem to retard grain growth during the continued spray casting process. It is envisaged from the microstructural observations for the deposited preform that the resultant distribution of SiC injected particles in the Al-Si microsturcture is affected by the amount of liquid phase in the top part of the preform and by the solidification rate of the preform deposited.