References
- 전기찬, 1993, 박판금속의 성형-이론과 실제, 반도출판사
- 양우열, 윤치상, 신철수, 조원석, 금영탁, 이승열, 황진영, 고강도 강판 성형 공정의 스프링백 제어, 2003, 한국소성가공학회지, 제 12 권, 제 8 호, pp. 718-721
- 김용환, 김태우, 이영선, 이정환, 고강도 TRIP강의 스프링백에 대한 연구, 2004, 한국소성가공학회지, 제 13 권, 제 5 호, pp. 409-414
- A. P. Karafillis, M. C. Boyce, 1996, Tooling and Binder Design for Sheet Metal Forming Compensating Springback Error, Int. J. Mach. Tools Manuf., Vol. 36, No. 4, pp. 503-526 https://doi.org/10.1016/0890-6955(95)00023-2
- W. Gan, R. H. Wagoner, 2004, Die Design Method for Sheet Springback, Int. J. Mech. Sci., Vol. 46, pp. 1097-1113 https://doi.org/10.1016/j.ijmecsci.2004.06.006
- 양재봉, 전병희, 오수익, 2000, 반응표면분석법을 이용한 알루미늄 판재 성형공정의 스프링백 저감에 관한 연구, 한국소성가공학회지, 제 9 권, 제 5 호, pp. 526-532
- 양우열, 이승렬, 금영탁, 2003, 스프링백 저감을 위한 초기 블랭크 설계, 한국소성가공학회지, 제 12 권, 제 3 호, pp. 208-213
- G. Liu, Z. Lin, W. Xu, Y. Bao, 2002, Variable Blankholder Force in U-shaped Part Forming for Eliminating Springback Error, J. Mater. Process. Technol., Vol. 120, pp. 259-264 https://doi.org/10.1016/S0924-0136(01)01110-4
- V. Viswanathan, B. Kinsey, J. Cao, 2003, Experimental Implementation of Neural Network Springback Control for Sheet Metal Forming, Trans. ASME: J. Eng. Mater. Technol., Vol. 125, pp. 141-147 https://doi.org/10.1115/1.1555652
- B. Haddag, T. Balan, F. Abed-Meraim, 2005, Springback Simulation: Impact of Some Advanced Constitutive Models and Numerical Parameters, Proceeding of the 6th International Conference NUMISHEET 2005, Detroit, MI, USA, pp. 286-291
- S. W. Lee, D. Y. Yang, 1998, An Assessment of Numerical Parameters influencing Springback in Explicit Finite Element Analysis of Sheet Metal Forming Process, J. Mater. Process. Technol., Vol. 80-81, pp. 60-67 https://doi.org/10.1016/S0924-0136(98)00177-0
- H. Huh, S. H. Kim, 2001, Optimum Process Design in Sheet-Metal Forming with Finite Element Analysis, ASME. J. Eng. Mater. Technol., Vol. 123, pp. 476-481 https://doi.org/10.1115/1.1395579
- R. H. Myers and D. C. Montgomery, 1995, Response Surface Methodology: Process and Product Optimization using Design Experiment, Wiley & Sons. New York
- LSTC, 2003, LS-DYNA3D Keyword User's Manual-Version 970
- Altair Engineering, 2004, HyperStudy User's Manual, Version 7.0
- M. Sunseri, A. P. Karafillis, J. Cao, M. C. Boyce, 1994, Methods to Obtain Net Shape in Aluminum Sheet Forming using Active Binder Force Control, proc. AMD-Vol. 194, Mechanics in Materials Processing and Manufacturing, ASME, pp. 167-184
- J. Cao, B. Kinsey, S. A. Solla, 2000, Consistent and Minimal Springback using a Steeped Binder Force Trajectory and Neural Network Control, Trans. ASME, J. Eng. Mater. Technol., Vol. 122, pp. 13-118
- S. S. Han, K. C. Park, 1999, An Investigation of the Factors influencing Springback by Empirical and Simulative Techniques, proc. NUMISHEET'99, Vol. 1, pp. 53-57
- A. Makinouchi, E. Nakamachi, E. Onate, R. H. Wagoner, 1993, Proceedings of the 2nd International Conference NUMISHEET'93, Ishihara, Japan
Cited by
- Process Design of Automobile Seat Rail Lower Parts using Ultra-High Strength, DP980 Steel vol.17, pp.2, 2018, https://doi.org/10.14775/ksmpe.2018.17.2.160