• Korea Science and Art Forum
• /
• v.34
• /
• pp.327-337
• /
• 2018

Korea is rapidly becoming an aging society as much as it takes the first place among OECD countries, and as the life expectancy of Korea gradually increases, the proportion of the elders in society increases. Accordingly, the happiness of the elders is contributed to the overall social atmosphere and happiness, however, the lower quality of life of the elders due to physical, psychological and social changes can be developed into social problems such as depression and rising suicide rate. As a result, there is a social interest in improving the quality of life and satisfaction of the elders, and the senior citizen center is receiving renewed attention as a form of welfare facility that can play a pivotal role in the social activities of the elders. In recent years, efforts to improve the environment of the senior citizen center have been made due to the growing role of it, however, there is a controversy over whether the quality of the indoor environment is user-friendly or not due to the limitations of material resources and human resources. It is considered that the quality of the color environment should be improved in the senior citizen center in the way that the color environment is not only an indoor environmental factor which gives high psychological and mental effects to users but also a way to improve the environmental satisfaction at the lowest cost. Previous studies on the facilities related to the elders have been actively carried out, but they were very sporadic and there was very little information about the color environment in the related laws or in the guideline presented by cities. It is necessary to integrate guidelines that are scattered within a comprehensive range without any specific target in order to grasp the current status of the color environment and to properly evaluate it. In addition, considering that the senior citizen center is an important leisure facility for the elders that functions in a residential area with a nationwide network, the results of this study are expected to contribute to the environmental improvement of existing senior citizen center which will be activated in the future by enabling the improvement of psychological satisfaction of the elders.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.24-36
• /
• 2022

The Bonghwang-dong ruins in Gimhae, the central area of Geumgwan Gaya, is presumed to be the site of the royal palace, and excavations have been in progress at the Gaya National Cultural Heritage Research Institute. According to a research conducted by lowering the level to the base layer on the north side of the site, mostly shell layers composed of oysters were confirmed, and soil composed of different material was alternately filled in to form a site construction. In other words, it can be seen that there was work at the site of the Bonghwang-dong ruins that required large-scale labor, such as building ramparts and embankments. There is stratigraphic confusion such as showing different age values in the same shell layer through a chronological analysis of organic matter and charcoal in the sedimentary layer, and deriving a result value in the upper layer ahead of the lower layer. In addition, open-sea diatoms are observed not only in the sedimentary layers, but also the pits. Therefore, it is judged that the soil constituting the ruins was brought from the outside. The Bonghwang-dong ruins are located inside the commonly called Bonghwang earthen ramparts, where many excavation organizations conducted research within the estimated range of the earthen fortifications. As a result, it was found that it was similar to the sedimentary layers of the ruins of the Three Kingdoms Period, which were investigated along with the ruins of Bonghwang-dong. Through this, the surrounding ruins, including those of Bonghwang-dong, were located close to paleo-Gimhae Bay, so it is believed that the soil brought from the surroundings was used to reinforce the ground. As a result of the excavation research on the Bonghwang-dong ruins conducted so far, it was found by sedimentary layer analysis and soil experiments that the ruins were created on stable land. Relics excavated in the sediments of the ruins and carbon dating data show that Bonghwang-dong carried out large-scale civil construction work in the 4th century to build the site, which clearly shows the status of Geumgwan Gaya.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.56-70
• /
• 2022

Tombs No. 39 and No. 63 in Gyo-dong, Changnyeong, are unique in the Changnyeong area in that they do not have additional burials because they are hoenggu-style tombs with an entrance on the north side. This study tried to understand the nature and meaning of the two separate stone walls at the entrance of the tomb along with the burial process of the tomb. These two stone walls mark small tombs built independently within a large tomb, with stone wall No. 39 stone wall No. 3 (No.39-3) and No. 63 stone wall No. 3 (No. 63-3). Both units are located in the middle of the northern wall of the burial body part and share one wall with the burial body part wall stone. All animal fluids inside the stone wall were identified. In particular, it was estimated that at least three dogs were buried as a result of identification of animal fluids No. 63-3. Above all, these animals have their heads facing outward with their backs to the main occupants, and do not overlap in a limited space and are placed side by side. Changnyeong Gyo-dong No. 39-3 and 63-3 were created in the process of building the burial body, and although they are independent relics, they form a subordinate relationship in that they were built along the main burial within one tomb. In addition, it is coercive in that it is placed in an orderly manner according to a certain direction in a state that has not been dismantled after killing an animal. Therefore, It is understood to be the SHUNJANG of dogs. Studies on animal fluids excavated from tombs in the Three Kingdoms period are interpreted as animal stewardship, sacrificial collection, and animal sacrifice depending on their location, and this is known as a series of animal sacrifice rites, namely, animal stewardship and sacrifice. This recognition is based on material objectification of animals, such as food or sacrifices. However, Changnyeong Gyo-dong No. 39-3 and 63-3 are different in that they recognize animals as spiritual beings in the process of funeral rites and are closely related to the ideology that there is life after death. In addition, analysis of the location and directionality of the remains is also required from multiple angles. These two SHUNJANG correspond to the entrance to the tomb, and the location is the most open space at the entrance. The appearance of a dog looking outward, etc., can also be interpreted as the meaning of protecting the tombs and byeoksa. This appearance can be compared with the dog depicted in a mural in a Goguryeo tomb that reflects the ancient world's thought and stone figures excavated from the tomb of King Muryeong of Baekje, and it is also consistent with the meaning of the JINMYOSU protecting the ancient tombs. This suggests that a multifaceted study on animal fluid burial remains is needed in the future.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.148-169
• /
• 2023

Hayeob pigment is known as one of the traditional dark green pigments, but the color, raw material, and manufacturing method have not been clearly identified. However, comparing the analysis results of the particle shape and constituent minerals of Hayeob pigments revealed through pigment analysis studies of colored cultural properties such as Dancheong, Gwaebul, and paintings, Hayeob pigments appear to be the same as Dongrok pigments produced by salt corrosion. Therefore, in order to restore Hayeob pigment, the manufacturing method of Dongrok pigment was studied based on the records of old literature. The Dongrok pigment manufacturing method confirmed in the old literature records is a natural corrosion method in which copper powder and a caustic are mixed and then left in a humid condition to corrode. Based on this, artificial corrosion using a corrosion tester was adopted to corrode the copper powder more efficiently, and an appropriate mixing ratio was selected by analyzing the state of corrosion products according to the mixing ratio of the caustic agent. In addition, the manufacturing method of Dongrok pigment was established by adding a salt removal process to remove residual caustic agents and a purification process to increase chroma during pigment coloring. The prepared Dongrok pigments have a bluish green or green color, show an elliptical particle shape and a form in which small particles are aggregated, and a porous surface is observed. The main constituent elements are copper(Cu) and chlorine(Cl), and the main constituent mineral is identified as atacamite [Cu₂Cl(OH)₃]. As a result of an accelerated weathering test to evaluate the stability of the prepared Dongrok pigments, it was found that the greenness partially decreased and the yellowness significantly increased as deterioration progressed. Before deterioration, the Dongrok pigments had lower yellowness compared to the Hayeob pigments of the old Dancheong, but after deterioration, yellowness increased significantly, and it was found to have a similar chromaticity range as Dancheong's Hayeob pigments. As a result, the prepared Dongrok pigments were confirmed to be similar to Dancheong's Hayeob pigments in terms of color as well as particle shape and constituent minerals.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2024

Limestone (CaCO₃, calcium carbonate), which is used as a raw material in the portland cement and steel industry, emits CO₂ through decarbonation by high temperatures in the manufacturing process. To reduce CO₂ emissions by the use of raw materials like limestone, it has been proposed to replace limestone with various industrial by-products that contain CaO but less or none of the carbonated minerals, that cause CO₂ emissions. Loss of Ignition (LOI), Thermogravimetric analysis (TG), and Infrared Spectroscopy (IR) are used to quantitative the amount of CO₂ emission by using these industrial by-products, but CO₂ emissions can be either over or underestimated depending on the characteristics of by-product materials. In this study, we estimated CO₂ contents by LOI, TG, IR and DTG(Differential Thermogravimetric analysis) of calcite(CaCO₃) and samples that contain CO₂ in the form of carbonate and whose weight increases by oxidation at high temperatures. The test results showed for CaCO₃ samples, all test methods have a sufficient level of reliability. On the other hand, for the CO₂ content of the sample whose weight increases at high temperature, LOI and TG did not properly estimate the CO₂ content of the sample, and IR tended to overestimate compared to the predicted value, but the estimated result by DTG was close to the predicted valu e. From these resu lts, in the case of samples that contain less than a few percent of CO₂ and whose weight increases during the temperature that carbonate minerals decompose, estimating the CO₂ content using DTG is a more reasonable way than LOI, TG, and IR.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.2
• /
• pp.6-25
• /
• 2024

This study concentrated on a report on the results of smelting experiments conducted eight times by the Jungwon National Research Institute of Cultural Heritage, put together the goals and results of the operation, and examined changes in the content of experiments and in the experimental results. First, changes related to operation, such as the ratio of raw materials to fuel and the presence or absence of additives, were reviewed depending on the operation goal. In addition, the results of metallurgical analysis of raw materials, formations, and byproducts were summarized and reviewed by comparing them with materials excavated from the ruins. The operation method varied up to the eighth smelting experiment in terms of iron ore roasting, additives, and raw material/fuel ratio. After reviewing the results again, pure iron with a low carbon content began to be confirmed through metallurgical analysis. As a result, it was confirmed that the charging ratio of raw materials and fuel plays an important role depending on the purpose of production. In addition, most of the products are gray cast iron, and it was deemed that this is due to changes in the internal structure of the pig iron while it was left in the furnace for a long time. The iron was an ingot that was in a molten state even though the carbon content did not reach 4.3%, where the process reaction takes place, and it was deemed to have been caused by excessive operating temperature. Based on the previously reviewed results and the structure and shape of the experimental furnace used in other ironmaking technology restoration experiments, this study finally attempted to restore the structure of an ancient iron smelting furnace, including the furnace's upper structure. By comprehensively referring to the remaining conditions of the excavated iron smelting furnace and the characteristics of the blow pipe, the form of the ancient iron smelting furnace was subdivided into six categories: furnace wall thickness, furnace height, blower height, blow pipe size, furnace inner wall shape, and top shape, and a restoration plan was proposed. To improve the problems of the restoration plan and the Jungwon National Research Institute of Cultural Heritage's experiments that have been conducted through continuous trial and error, an experiment that reflects changes in operating methods by lowering the furnace height and controlling the blowing volume is necessary.

• Journal of Chest Surgery
• /
• v.41 no.3
• /
• pp.295-304
• /
• 2008

Background: Various experimental trials for the development of bioprosthetic devices are actively underway, secondary to the limited supply of autologous and homograft tissue to treat cardiac diseases. In this study, porcine bioprostheses that were treated with glutaraldehyde (GA), ethanol, or sodium dodecylsulfate (SDS) were examined with light microscopy and transmission electron microscopy for mechanical and physical imperfections before implantation, Material and Method: 1) Porcine pericardium, aortic valve, and pulmonary valve were examined using light microscopy and JEM-100CX II transmission electron microscopy, then compared with human pericardium and commercially produced heterografts. 2) Sections from six treated groups (GA-Ethanol, Ethanol-GA, SDS only, SDS-GA, Ethanol-SDS-GA and SDS-Ethanol-GA) were observed using the same methods. Result: 1) Porcine pericardium was composed of a serosal layer, fibrosa, and epicardial connective tissue. Treatment with GA, ethanol, or SDS had little influence on the collagen skeleton of porcine pericardium, except in the case of SDS pre-treatment. There was no alteration in the collagen skeleton of the porcine pericardium compared to commercially produced heterografts. 2) Porcine aortic valve was composed of lamina fibrosa, lamina spongiosa, and lamina ventricularis. Treatment with GA, ethanol, or SDS had little influence on these three layers and the collagen skeleton of porcine aortic valve, except in the case of SDS pre-treatment. There were no alterations in the three layers or the collagen. skeleton of porcine aortic valve compared to commercially produced heterografts. Conclusion: There was little physical and mechanical damage incurred in porcine bioprosthesis structures during various glutaraldehyde fixation processes combined with anti-calcification or decellularization treatments. However, SDS treatment preceding GA fixation changed the collagen fibers into a slightly condensed form, which degraded during transmission electron micrograph. The optimal methods and conditions for sodium dodecylsulfate (SDS) treatment need to be modified.

• Journal of Chest Surgery
• /
• v.41 no.6
• /
• pp.679-686
• /
• 2008

Background: Cellular remnants in the bioprosthetic heart valve are known to be related to a host's immunologic response and they can form the nidus for calcification. The extracellular matrix of the decellularized valve tissue can also be used as a biological scaffold for cell attachment, endothelialization and tissue reconstitution. Thus, decellularization is the most important part in making a bioprosthetic valve and biological caffold. Many protocols and agents have been suggested for decellularization, yet there ave been few reports about the effect of a treatment with hypotonic solution prior to chemical or enzymatic treatment. This study investigated the effect of a treatment with hypotonic solution and the appropriate environments such as temperature, the treatment duration and the concentration of sodium dodecylsulfate (SDS) for achieving proper decellularization. Material and Method: Porcine aortic valves were decellularized with odium dodecylsulfate at various concentrations (0.25%, 0.5%), time durations (6, 12, 24 hours) and temperatures ($4^{\circ}C$, $20^{\circ}C$)(Group B). Same the number of porcine aortic valves (group A) was treated with hypotonic solution prior to SDS treatment at the same conditions. The duration of exposure to the hypotonic solution was 4, 7 and 14 hours and he temperature was $4^{\circ}C$ and $20^{\circ}C$, respectively. The degree of decellularization was analyzed by performing hematoxylin and eosin staining. Result: There were no differences in the degree of decellularization between the two concentrations (0.25% 0.5%) of SDS. Twenty four hours treatment with SDS revealed the best decellularization effect for both roups A and B at the temperature of $4^{\circ}C$, but there was no differences between the roups at $20^{\circ}C$. Treatment with hypotonic solution (group A) showed a better ecellularization effect at all the matched conditions. Fourteen hours treatment at $4^{\circ}C$ ith ypotonic solution prior to 80S treatment revealed the best decellularization effect. The treatment with hypotonic solution at $20^{\circ}C$ revealed a good decellularization effect, but his showed significant extracellular matrix destruction. Conclusion: The exposure of porcine heart valves to hypotonic solution prior to SDS treatment is highly effective for achieving decellularization. Osmotic treatment with hypotonic solution should be considered or achieving decellularization of porcine aortic valves. Further study should be carried out to see whether the treatment with hypotonic solution could reduce the exposure duration and concentration of chemical detergents, and also to evaluate how the structure of the extracellular matrix of the porcine valve is affected by the exposure to hypotonic solution.

• Journal of Chest Surgery
• /
• v.39 no.1 s.258
• /
• pp.1-11
• /
• 2006

Background: CD44 is a glycoprotein on the cell surface which is involved in the cell-to-cell and cell-to-matrix interaction. The standard form, CD44s and multiple isoforms are determined by alternative splicing of 10 exons. Recent studies have suggested that CD44 may help invasion and metastasis of various epithelial tumors as well as activation of Iymphocytes and monocytes. The expression pattern of CD44 can be different according to tumor types. The author studied the expression pattern of CD44s and one of its variants, CD44v6 in non-small cell lung carcinomas (NSCLC) to find their implications on clinicopathologic aspects, including the survival of the patients. Material and Method: A total of 89 primary NSCLSs (48 squamous cell carcinomas, 33 adenocarcinomas, and 8 undifferentiated large cell carcinomas) were retrieved during the years between 1985 to 1994. The immunohisto chemistry was done by using monoclonal antibodies and the CD44 expression for angiogenesis was evaluated by counting the number of tumor microvessels. Result: Seventy-one (79.8$\%$) and 64 (71 .9$\%$) among 89 NSCLSs revealed the expression of CD44s and CD44v6, respectively. The expression of CD44s was well correlated with that of CD44v6 (r=0.710, p < 0.0001). The expression of CD44s and CD44v6 was associated with the histopathologic type of the NSCLCs, and squamous cell carcinoma was the type that showed the highest expression of CD44s and CD44v6 (p < 0.0001). Microvessel count was the highest in adenocarcinomas (113.6$\pm$69.7 on 200-fold magnification and 54.8$\pm$41.1 on 400-fold magnification) and correlated with the tumor size of TNM system (r=0.217, p=0.043) and CD44s expression (r=0.218, p=0.040). In adenocarcinoma, the patients with higher CD44s expression survived shorter than those with lower CD44s expression (p=0.0194) but there was no statistical significance on multivariate analysis(p=0.3298). Conclusion: The expression of both CD44s and CD44v6 may be associated with the squamous differentiation in non-small cell lung carcinomas. The relationship of CD44s expression with micro-vessel density of the tumor suggests an involvement of CD44s in tumor angiogenesis, which in turn would help tumor growth.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.455-462
• /
• 2000

The objective of this study was to examine the physicochemical characteristics of coagulation reaction between loess and red tide organisms (RTO) and its feasibility, in developing a technology for the removal of RTO bloom in coastal sea. The physicochemical characteristics of loess were examined for a particle size distribution, surface characteristics by scanning electron microscope, zeta potential, and alkalinity and pH variations in sea water. Two kinds of RTO that were used in this study, Cylindrothen closterium and Skeietonema costatum, were sampled in Masan bay and were cultured in laboratory. Coagulation experiments were conducted using various concentrations of loess, RTO, and a jar tester. The supernatant and RTO culture solution were analyzed for pH, alkalinity, RTO cell number. A negative zeta potential of loess increased with increasing pH at $10^(-3)M$ NaCl solution and had -71.3 mV at pH 9.36. Loess had a positive zeta potential of +1,8 mV at pH 1.98, which resulted in a characteristic of material having an amphoteric surface charge. In NaCl and $CaCl_2$, solutions, loess had a decreasing negative zeta potential with increasing $Na^+\;and\;Ca^(+2)$ ion concentration and then didn't result in a charge reversal due to not occurring specific adsorption for $Na^+$ ion while resulted in a charge reversal due to occurring specific adsorption for $Ca^(+2)$ ion. In sea water, loess and RTO showed the similar zeta potential values of -112,1 and -9.2 mV, respectively and sea sand powder showed the highest zeta potential value of -25.7 mV in the clays. EDLs (electrical double-layers) of loess and RTO were extremely compressed due to high concentration of salts included in sea water, As a result, there didn't almost exist EDL repulsive force between loess and RTO approaching each other and then LVDW (London-yan der Waals) attractive force was always larger than EDL repulsive force to easily form a floe. Removal rates of RTO exponentially increased with increasing a loess concentration. The removal rates steeply increased until $800 mg/l$ of loess, and reached $100{\%}$ at 6,400 mg/l of loess. Removal rates of RTO exponentially increased with increasing a G-value. This indicated that mixing (i.e., collision among particles) was very important for a coagulation reaction. Loess showed the highest RTO removal rates in the clays.