• Journal of Conservation Science
• /
• v.5 no.1 s.5
• /
• pp.87-93
• /
• 1996

This study was carried out to Identify wood and charcoal segments, which were excavated in 1994 at the Seohaean highway construction site along the western coast of Korea ; Tuntaeri, Hwasunggun. We identified the objects excavated at the fire places of the Tuntaeri dwelling sites (early Koryo period ; A. D. $11\~12C$) ; charcoal pieces and 1 wood segment, which was used for the handle of a metal hook. Chestnut(Castanea crenata), deciduous oaks(Quercus spp.) and maple(Acer app.) were identified from the charcoals, whereas the wood segment as willow species(Salix spp.). These species seem to represent warm and wet climate in the middlewest Korea during $11\~12C$.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.79-83
• /
• 1999

A cationic demand(CD) is a very useful indication for determining the optimum dosage rate of retention aids to the papermaking stock at the wet end. Polyelectrolyte titration has been most often used to determine a CD. Highly accurate results can be obtained by this method when the ionic strength of sample is low. But this is accompanied by the serious errors when the ionic strength is higher than that corresponding to 20 milli molar(mM) monovalent, 2 mM divalent or 0.2 mM trivalent ions because of no occurrence of the end point of titration. Therefore, it is very difficult or almost impossible for the conventional method to be applied to the industrial suspensions such as papermaking stock and industrial waste water. Then a novel method using chromophoric labeled cationic polymer which can be applicable to the sample with high ionic strength has been developed.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.19-24
• /
• 2008

A new compressive strength test specimen for linerboard and medium was developed, and tested for its agreement with conventional testing methods such as RCT and STFI. The new specimen enables compressive testing under the changing humidity and temperature. Experimental results showed that the new specimen gave equivalent compressive strengths as the other conventional methods at a constant temperature and humidity. We'll apply the methods under the cyclic humidity and temperature conditions.

• International Journal of Reliability and Applications
• /
• v.3 no.4
• /
• pp.155-164
• /
• 2002

This paper focuses on how modem data mining can be integrated with real-time relational databases and commercial data warehouses to improve reliability in real-time. An important Issue for many manufacturers is the development of relational databases that link key product attributes with real-time process parameters. Helpful data for key product attributes in manufacturing may be derived from destructive reliability testing. Destructive samples are taken at periodic time intervals during manufacturing, which might create a long time-gap between key product attributes and real-time process data. A case study is briefly summarized for the medium density fiberboard (MDF) industry. MDF is a wood composite that is used extensively by the home building and furniture manufacturing industries around the world. The cost of unacceptable MDF was as large as 5% to 10% of total manufacturing costs. Prevention can result In millions of US dollars saved by using better Information systems.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.5 s.118
• /
• pp.60-65
• /
• 2006

The physical and mechanical properties of linerboard were shown to be affected by changing atmospheric conditions. Two atmospheric conditions were measured in order to investigate how they were affected by different atmospheric conditions on the physical and mechanical properties of domestic linerboard. The basis data set for the standardization research was provided in this study. It is confirmed that the relative humidity seemed to be a major factor on the quality deterioration of a linerboard. Experimental results have shown that the short span compression test (SCT) could be used to evaluate the quality characteristics of linerboardat different moisture content and relative humidity.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.448-457
• /
• 2022

Yersinia enterocolitica, which causes yersiniosis, is a bacterium that produces biofilms effectively. The inhibition of biofilm formation provides a method for preventing infections with Y. enterocolitica. In this study, the inhibitory activity of Y. enterocolitica biofilm formation was investigated in a library of 140 edible plant methanol extracts including forest products. It was identified that the biofilm formation could be inhibited by 12 extracts of plants, Agastachis Herba, Agrimoniae Herba, Diospyros kaki leaves, Elsholtziae Herba, Ginkgonis Semen, Lycopi Herba, Melonis Pedicellus, Menthae Herba, Mori Radicis Cortex, Polygoni Multiflori Radix, Prunellae Spica, and Schizonepetae Spica. After changing the solvent to ethanol and water, the greatest inhibition of biofilm formation was produced by a 50% ethanol extract of Polygoni Multiflori Radix. A method to effectively prevent yersiniosis can be developed using the edible plant extracts identified in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.685-694
• /
• 2016

In this study, the thermal degradation behavior of biomass during torrefaction was studied by thermogravimetric and byproduct gas analysis. Torrefaction temperature, time, and heating rate were $220{\sim}300^{\circ}C$, 110 min, and $10{\sim}30^{\circ}C/min$, respectively. The degradation rate of yellow poplar was 8.01~8.81% at $220^{\circ}C$ and 71.86~77.38% at $300^{\circ}C$ depending on heating rate. The degradation rate significantly increased at temperature over $240^{\circ}C$. On the other hand, degradation rate of larch was relatively low as 49.58~54.15% at $300^{\circ}C$. The activation energy of yellow poplar was 87.32~91.24 kJ/mol; these values did not significantly change with heating rate. The activation energy of larch was 83.85~91.60 kJ/mol. The major components of the gas generated during torrefaction were derived from hemicellulose. The component types and concentrations increased with torrefaction severity. High concentrations of furfural and acetic acid were detected during torrefaction of yellow poplar.

• The Korean Journal of Mycology
• /
• v.46 no.3
• /
• pp.325-331
• /
• 2018

We aimed to increase the utility of Broussonetia kazinoki (paper mulberry) by using its woody parts as a substrate for Lentinula edodes cultivation. Using different mixing ratios of paper mulberry and oak tree sawdust, five types of column-type media were prepared (1.2 kg each). Two L. edodes strains (NIFoS 2462 and NIFoS 2778) were used in this study. In the first flush, numerous small mushrooms were harvested because the fruited mushrooms were densely packed on the small media. The highest productivity was obtained with a 3:1 mixture of paper mulberry and oak tree sawdust (Q. acutissima:Q. mongolica, 1:1). In particular, for NIFoS 2462, the proportion of paper mulberry in the medium positively correlated with productivity. The size of NIFoS 2778 was uniform in all media tested. By contrast, the mushroom weight of NIFoS 2462 decreased, but the other characteristics were not significantly affected. Collectively, these findings suggest that B. kazinoki sawdust could be used to grow shiitake mushrooms and that some oak sawdust substitution is also possible. Our results could increase the utility of discarded by-products, such as sawdust.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.342-349
• /
• 2006

The survey guideline of forest products statistics suggests a certain type of standard to aggregate production amount of each item such as dry bracken, raw dates, cracked nuts, It does not, however, give any information about transition ratios, which would apply to convert weights of fresh bracken into dry one, or cracked nuts into the non-cracked. This has been one of the main factors which would make the statistics unreliable. The purpose of this study is to examine the aggregation realities and to put forward some proposals to improve forest products statistics with transition ratios. Targets of this study are 10 forest products that are strongly related to the mentioned problems. With the calculated transition ratios and some assumptions the changing rate of the official statistics of 2004 production amounts ranged from -41% to 474% for the 10 subjects. The suggested figures for transitions are based only on one-year analysis results. Therefore more periods are required to improve the accuracy and the reliability, and this study would be a good starting point.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.507-517
• /
• 2010

This study estimated the amount of carbon stocks in harvested wood products (HWP) using accounting approaches suggested by 2006 IPCC guidelines and analyzed the impacts of different approaches on national greenhouse gas inventory and the forest sector in Korea. The change in carbon stocks was calculated at the level of semi-finished wood products, which cover sawnwood, wood-based panels, other industrial wood, paper and paperboard. An estimation of the changes in carbon stocks in HWP in use for the period 1970~2008 varied between -9,023 Gg $CO_2$/yr and 4,052 Gg $CO_2$/yr depending on the accounting approach used. The stock-change approach provided the most favorable results because Korea was a net importer of wood products. However, each approach generates different impacts on harvest, trade, the use of wood for energy production and recycling. When deciding its position on accounting approach, thus, the Government should consider future direction of national forest policies as well as the effect on national greenhouse gas inventory for the minimization of negative impacts resulting from its selection.