• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.371-378
• /
• 2014

Manual materials handling tasks are the main risk factors for the work-related musculoskeletal disorders. Many assistant tools for manual materials handling are being used in various kind of industries. One of them is a 4-wheeled cart which is widely used in manufacturing factories, hospitals, etc. The major force required to control the 4-wheeled cart is pushing and pulling. There are two types of handles being used for the 4-wheeled cart : vertical type (two vertical handles), and horizontal type (one horizontal handle). This study tried to investigate the pushing forces and subjective discomforts (hand/writst, shoulder, low back, and overall) of the two handle types with different handle height and distance conditions. Twelve healthy male students (mean age = 23.4 years) participated in the experiment. The independent variables were handle angle (horizontal, vertical), handle height (low, medium, high), and handle distance (narrow, medium, wide). The full factorial design was used for the experiment and the maximum pushing forces were measured in 18 different conditions ($2{\times}3{\times}3$). Analysis of variance (ANOVA) procedure was conducted to test the effects of the independent variables on the pushing force and discomfort levels. Handle height and angle were found to be the critical design factors that affect the maximal pushing forces and subjective discomfort. In the middle height, subjects exerted higher pushing forces, and experience lower discomfort levels compared to the high, and low height. There was no statistical influence of the handle distance to the pushing forces and subjective discomfort levels. It was found out that the effects of the handle angle (horizontal and vertical) on both pushing force and subjective discomfort were statistically significant (p < 0.05). The vertical handle revealed higher pushing force and lower discomfort level than the horizontal handle. The reason for that was thought to be the different postures of the hand when grasping the handles. The horizontal handle induced pronaton of the hand and made hand posture more deviated from the neutral position.

• 대한인간공학회지
• /
• 제35권5호
• /
• pp.413-423
• /
• 2016

Objective:The aims of this study are to understand the effects of task (pushing, pulling, and clockwise and counter clockwise twisting) direction on the maximal output and their grip forces and to explore the relationship between the maximal output and the grip forces. Background: Knowing the normative maximal grip force is not enough to design a good hand tool. The industrial designers should understand the required grip forces in various motions toward a specific direction to make an effective and efficient hand tool. Method: Eighteen healthy volunteers participated in the series of isometric maximal output force tests. A custom-made force measuring equipment collected the output and the grip forces for three seconds. Force measurements along the vertical, coronal and sagittal axes were randomly repeated three times. Results: The pulling was strongest and the pushing was weakest in all directions. The effect of motion on the output forces varied in different directions. The corresponding grip force increased in the order of pushing, pulling, clockwise twisting, and counter clockwise twisting in all directions. The maximal output and their grip forces were highly correlated but the relationship was affected by motion and direction. The regression coefficient was greatest in pulling and smallest in clockwise twisting. Conclusion: The effect of motion on the output forces varied in different directions. The maximal output and their grip forces were correlated but the relationship was affected by motion and direction. Application: Findings of this study can be valuable information for industrial designers to develop more productive hand tools and work stations to help preventing the musculoskeletal disorders at work.

• 대한인간공학회지
• /
• 제1권2호
• /
• pp.3-9
• /
• 1982

This study demonstrates that certain personal and task factors can be modelled to predict slip potential as well as back loadings durings dynamic pushing and pulling tasks. Such tasks are com- mon to many manual material handling jobs in industry and the results of this work will hopefully be of use in improved job design. The objective of this research is to formulate and validate a dynamic biomechanical model of pushing and pulling a cart. For pushing and pulling tasks, the model can : (1) estimate foot forces for given hand forces, and (2) estimate tors muscle and vertabral column loadings. In order to formulate and validate the model, experiments involving pushing and pulling of a cart were performed. These experiments produced data of the following type : (1) dynamic forces on the feet, (2) hand forces required to move the cart, (3) body motions as functions of various cart motion and (4) back muscle actions. The model was validated using three different methods; precision was tested using correlation between predicted and measured results, accuracy using standard error between of predicted and measured results, and intuitive comparison of predicted results using sensitivity analyses.

• 한국안전학회지
• /
• 제27권2호
• /
• pp.84-91
• /
• 2012

This study evaluated three forces (lifting, pushing and twisting) required to maneuver the single-wheel barrows according to handle height, width, horizontal angle and vertical angle. The four independent variables were varied in two levels. Handle height was varies in two levels : 'knuckle height (KH)' and 'KH + 0.1 ${\times}$ stature'. The two handle widths were '1.5 ${\times}$ shoulder width (SW)' and '1.75 ${\times}$ SW'. Two angles of $0^{\circ}$ and $15^{\circ}$ were used for horizontal and vertical angles. The 24 factorial design was used in the experiment. Twelve healthy male students (undergraduate and graduate) participated in the experiment. Subjects exerted three forces (pushing, lifting, and twisting clockwise) in each experimental condition. The order of 16 treatment conditions was determined randomly. Results showed that the effects of the four factors were different according to three forces. While lifting and twisting forces were higher in 'knuckle height', the pushing force was higher in 'KH + 0.1 ${\times}$ stature' (p < 0.05). Lifting and pushing forces showed higher values in the horizontal angle $0^{\circ}$ than in $15^{\circ}$. Handle width and vertical angle showed no statistically significant main effects on three forces (p > 0.05). Results of this study could be used as basic data for the ergonomic design of handle variables of one- or two-wheel barrows.

• Safety and Health at Work
• /
• 제11권3호
• /
• pp.307-313
• /
• 2020

Background: Many tasks in industrial and health care setting are involved with pushing and pulling tasks up or down on a ramp. An efficient method of moving cart which reduces the risk of low back pain should be concerned. This study aimed to investigate the effects of handling types (HTs) and slope on lumbar spinal load during moving a cart on a ramp. We conducted a 2 × 2 × 4 factorial design with three main factors: 2 HTs, 2 handling directions of moving a cart and 4 degrees of ramp slope. Methods: Thirty healthy male workers performed 14 tasks consist of moving a cart up and down on the ramp of 0°, 10°, 15°, and 20° degrees with pushing and pulling methods. Joint angles from a 3D motion capture system combined with subject height, body weight, and hand forces were used to calculate the spinal load by the 3DSSPP program. Results: Our results showed significant effect of HT, handling directions and slope on compression and shear force of the lumbar spine (p < 0.001). When the ramp gradient increased, the L4/5 compression forces increased in both pushing and pulling (p < 0.001) Shear forces increased in pulling and decreased in pushing in all tasks. At high slopes, pulling generated more compression and shear forces than that of pushing (p < 0.01). Conclusion: Using the appropriate technique of moving a cart on the ramp can reduce the risk of high spinal load, and the pushing is therefore recommended for moving a cart up/down on ramp gradients.

• 한국안전학회지
• /
• 제26권1호
• /
• pp.58-64
• /
• 2011

This study evaluated the effects of the handle width(shoulder width, 1.25${\times}$shoulder width, 1.5${\times}$shoulder width), height(3 levels : knee, medium, knuckle) and horizontal angle($0^{\circ}$, $10^{\circ}$) on the pushing, lifting, and twisting strengths which were required for carrying single or two wheel barrows. Twelve healthy college students(male) participated in the experiment. In each experimental condition($3{\times}3{\times}2$=18), the subjects exerted three forces(pushing, lifting, and twisting clockwise). The experimental conditions and three forces were tested in random order, and a minimum 2 minutes of rest was provided between exertions. Results showed that the mean and maximum pushing forces showed greater values when the horizontal angle was $0^{\circ}$ than $10^{\circ}$(p=0.016). However, the three independent variables had no statistically significant effects on the lifting forces(p>0.1). The mean and maximum twisting forces increased as the handle width became larger(p<0.05). Also, there was a marginal effect of the horizontal angle(p=0.065) on the twisting force. From the results of this study, the horizontal angle of $0^{\circ}$ and the wider handle width were suggested for the design of single-wheel barrows.

• Journal of Preventive Medicine and Public Health
• /
• 제27권4호
• /
• pp.763-776
• /
• 1994

Recent studies reveal that grip forces during the hand-arm vibration are most significant for the genesis of vibration-induced white linger syndrome. Therefore, exerted grip forces and skin temperatures of fingers were regarded as dependent variables in experiments and the effects of grip temperature, noise, pushing force, vibration and the combined effect of vibration and pushing force were studied. The objectives of the present study were, first, to varify and compare the changes of grip force affected by grip temperature, noise, pushing force, vibration and the combined effect of vibration and pushing force and, second, to observe the reaction of finger skin temperature affected by above factors. Forty-six healthy male students ($25.07{\pm}2.85$) participated in five systematically permuted trials, which endured 4 minutes each other. Experiments were executed in a special chamber with an air temperature of 21C. In each experiments, the subjects were exposed to five experiment types: (1) grip force of 25N only, (2) pushing force of 50N, (3) acceleration of vibration $7.1m/sec^2(z-direction)$, (4) pink noise of 95 dB (A) and (5) combination of pushing force 50N and acceleration of vibration $7.1m/sec^2$. A repeated-measures analysis of variance (ANOVA) was performed on the grip force to test whether it was affected by noise, pushing force, vibration and pushing force. The present results show that vibration was significantly related to the increase of grip force, but the other factors, such as pushing force, noise and grip temperature had no signigicant influence on the increase of grip force, and that the reaction of finger skin temperature were significantly affected by the skin temperature at start of experiment and grip temperature, not grip force and other experimental conditions. Therefore, we suggest that the management for decreasing the grip force is meaningful to prevent the occurrence of Hand-arm vibration syndrome (HAVS).

• Safety and Health at Work
• /
• 제8권1호
• /
• pp.11-18
• /
• 2017

The purpose of this review is to name and describe the important factors of musculoskeletal strain originating from pushing and pulling tasks such as cart handling that are commonly found in industrial contexts. A literature database search was performed using the research platform Web of Science. For a study to be included in this review differences in measured or calculated strain had to be investigated with regard to: (1) cart weight/ load; (2) handle position and design; (3) exerted forces; (4) handling task (push and pull); or (5) task experience. Thirteen studies met the inclusion criteria and proved to be of adequate methodological quality by the standards of the Alberta Heritage Foundation for Medical Research. External load or cart weight proved to be the most influential factor of strain. The ideal handle positions ranged from hip to shoulder height and were dependent on the strain factor that was focused on as well as the handling task. Furthermore, task experience and subsequently handling technique were also key to reducing strain. Workplace settings that regularly involve pushing and pulling should be checked for potential improvements with regards to lower weight of the loaded handling device, handle design, and good practice guidelines to further reduce musculoskeletal disease prevalence.

• 한국운동역학회지
• /
• 제18권1호
• /
• pp.213-226
• /
• 2008

본 연구의 목적은 유도의 기본 기술인 당기기, 후리기 훈련 및 측정이 가능한 사람-받기(파트너) 역할을 대신할 수 있는 장비인 유도 인형(doll-uke, 장비-받기)을 개발하는데 있다. 기본 방향은 사람-받기와 최대한 유사한 구조와 기능을 갖도록 하고, 절차는 [기본 모형 설계-제작-평가(1)-모형(2) 평가(2)-1차 제작-보완-2차 제작-보완-평가(3)-완성(최종 제작)- 데이터 취득 장치 연결-완성]의 단계를 거쳤다. 평가는 사람-받기와 장비-받기를 상대로 하는 경우, 당기기 밧다리후리기 동작에 대한 역학적 유사성을 위해 각 변인의 상대수준차를 계산하였으며, 선수들과 지도자의 설문 평가 단계를 거쳤다. 개발된 장비-받기의 구조는 크게 유도인형(doll-uke)과 힘 측정시스템(doll-uke fore system)이다. 밧다리후리기 발휘, 시 사람을 대신한 장비-받기의 역학적 변인들에서 재현율이 관찰되었으며, 동작 패턴이 사람-받기의 유사함과 설문 평가에서도 유용성이 인정되었다. 사람-받기를 대신할 훈련 및 측정 장비인 유도 인형(doll-uke)을 이용함으로서 당기기 밀기 후리기 등의 기술 강화는 물론, 동작 시 발휘되는 힘의 정량적 데이터를 용이하게 얻어 선수들에게 피드백을 제공해줌으로써, 정성적 정량적 분석을 통한 훈련 현장의 과학화, 경기력 향상을 기대할 수 있겠다.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.43-52
• /
• 1999

In this study, the vibration damping characteristics of the powered hand tools transmitted in hand-arm system were examined and compared. The types of powered tools for the experiment are general typed drill, impact drill, grinder, and wire brush. To analyze the characteristics of vibration damping, the magnitude of acceleration of vibration on X, Y, and Z direction at tool, hand, wrist, and the joint between forearm and upper arm were measured respectively. The results indicated that impact drill generated the highest value of acceleration of vibration among the four types of tools used in the experiments. The highest value of the amount of acceleration of vibration was found in the direction of Y. And the amount of acceleration of vibration was significantly affected by the type of tool, type of work, and pushing forces. As become the more distant from the tool, the smaller the amount of acceleration of vibration. Also, the bigger the pushing force at the tool, the higher the acceleration of vibration.