• Tribology and Lubricants
• /
• 제36권2호
• /
• pp.105-115
• /
• 2020

This paper presents a numerical study on the rotordynamic analysis of a dual-spool turbofan engine in the context of blade defect events. The blades of an axial-type aeroengine are typically well aligned during the compressor and turbine stages. However, they are sometimes exposed to damage, partially or entirely, for several operational reasons, such as cracks due to foreign objects, burns from the combustion gas, and corrosion due to oxygen in the air. Herein, we designed a dual-spool rotor using the commercial 3D modeling software CATIA to simulate blade defects in the turbofan engine. We utilized the rotordynamic parameters to create two finite element Euler-Bernoulli beam models connected by means of an inter-rotor bearing. We then applied the unbalanced forces induced by the mass eccentricities of the blades to the following selected scenarios: 1) fully balanced, 2) crack in the low-pressure compressor (LPC) and high pressure compressor (HPC), 3) burn on the high-pressure turbine (HPT) and low pressure compressor, 4) corrosion of the LPC, and 5) corrosion of the HPC. Additionally, we obtained the transient and steady-state responses of the overall rotor nodes using the Runge-Kutta numerical integration method, and employed model reduction techniques such as component mode synthesis to enhance the computational efficiency of the process. The simulation results indicate that the high-vibration status of the rotor commences beyond 10,000 rpm, which is identified as the first critical speed of the lower speed rotor. Moreover, we monitored the unbalanced stages near the inter-rotor bearing, which prominently influences the overall rotordynamic status, and the corrosion of the HPC to prevent further instability. The high-speed range operation (>13,000 rpm) coupled with HPC/HPT blade defects possibly presents a rotor-case contact problem that can lead to catastrophic failure.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.576-585
• /
• 2002

A three-dimensional Lagrangian explicit time-integration finite element code for analyzing the dynamic impact phenomena was developed. It uses four node tetrahedral elements. In order to consider the effects of strain rate hardening, strain hardening and thermal softening, which are frequently observed in high-velocity deformation phenomena, Johnson-Cook model is used as constitutive model. For more accurate and robust contact force computation, the defense node contact algorithm was adopted and implemented. In order to evaluate the performance of the newly developed three-dimensional hydrocode NET3D, numerical simulations of the oblique impact of mild steel plate by mild steel sphere were carried out. Ballistic limit about various oblique angle between 0 degree and 80 degree was estimated through a series of simulations with different initial velocities of sphere. Element eroding by equivalent plastic strain was applied to mild steel spheres and targets. Ballistic limits and fracture characteristics obtained from simulation were compared with experimental results conducted by Finnegan et al. From numerical studies, the following conclusions were reached. (1) Simulations could successfully reproduce the key features observed in experiment such as tensile failure termed "disking"at normal impacts and outwards bending of partially formed plus segments termed "hinge-mode"at oblique impacts. (2) Simulation results fur 60 degrees oblique impact at 0.70 km/s and 0.91 km/s were compared with experimental results and Eulerian hydrocode CTH simulation results. The Lagrangian code NET3D is superior to Eulerian code CTH in the computational accuracy. Agreement with the experimentally obtained final deformed cross-sections of the projectile is excellent. (3) Agreement with the experimental ballistic limit data, particularly at the high-obliquity impacts, is reasonably good. (4) The simulation result is not very sensitive to eroding condition but slightly influenced by friction coefficient.

• 한국강구조학회 논문집
• /
• 제20권3호
• /
• pp.409-419
• /
• 2008

율리신-이바노브 항복 조건을 이용하여 4절점 순수변위 준적합 쉘요소의 정식화를 제안하였다. 기하강성 행렬은 그린 변형률 텐서를 이용하여 휨변형률 및 전단변형률도 기하강성행렬에 고려되었다. 그 결과 접선강성행렬의 해석적인 적분으로 비선형 해석시 매우 효율적으로 계산이 되고 있다. 이 정식은 변형률 경화의 이바노브-유리신 항복조건을 이용하여 재료 비선형 해석시에도 쉽게 적분이 된다. 즉 두께 방향의 적층 적분을 하지 않는 율리신-이바노브의 정식은 대규모의 쉘 구조에도 계산상 아주 적합하다. 검증된 수치 예제에서 만족스러운 결과를 보여주고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.618-622
• /
• 2004

The vibration test system of SITC(Satellite Integration and Test Center) at KARI(Korea Aerospace Research Institute) has been used successfully for the environmental tests of a majority of korean space programs, such as KOMPSAT, Koreasat KITSAT, STSAT and KSR program since 1996. To meet the recent needs of large size test facility available for the vibrational tests of the huge launch vehicles and tole-communication satellites which will be developed in the near future, KARI undertook to construct the large size multi-electromagnetic shaking system with 3 $\times$ 3m head expander system. The new system will consist of three electromagnetic shakers which has 160 kN thrust force individually, and be able te sustain up to 8 tons test load and 300 kNm overturing moment. And to avoid the tremendous cost and effort to furnish the seismic block with large size and weight, it will adopt a Lin-E-Air type configuration with which the seismic block is less severe than a Solid-Truninon type. In addition, to fulfill the strong requirement of high overturning moment the additional guidance system including a central bearing system on a central support and several pad bearings around the head expander body is now considered. This paper describes the configuration and the design parameters of the multi-shaking system which is under development by KARI's engineers.

• Smart Structures and Systems
• /
• 제21권5호
• /
• pp.571-582
• /
• 2018

Track irregularities of high-speed Maglev lines have significant influence on ride comfort. Their adjustment is of key importance in the daily maintenance of these lines. In this study, an adjustment method is proposed and track irregularities analysis is performed. This study considers two modules: an inspection module and a vehicle-guideway coupling vibration analysis module. In the inspection module, an inertial reference method is employed for field-measurements of the Shanghai high-speed Maglev demonstration line. Then, a partial filtering, integration method, resampling method, and designed elliptic filter are employed to analyze the detection data, which reveals the required track irregularities. In the analysis module, a vehicle-guideway interaction model and an electromagnetic interaction model were developed. The influence of the measured line irregularities is considered for the calculations of the electromagnetic force. Numerical integration method was employed for the calculations. Based on the actual field detection results and analysis using the numerical model, a threshold analysis method is developed. Several irregularities modalities with different girder end's deviations were considered in the simulations. The inspection results indicated that long-wavelength irregularities with larger girder end's deviations were the dominant irregularities. In addition, the threshold analysis of the girder end's deviation shows that irregularities that have a deviation amplitude larger than 6 mm and certain modalities (e.g., M- and N-shape) are unfavorable. These types of irregularities should be adjusted during the daily maintenance.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.72-81
• /
• 2014

In this study, we perform the optimization of trailing arm bush in a vehicle rear suspension to improve the ride and handling performance. A design problem was formulated considering 2 objective functions and 7 constraints related to vehicle ride and handling performance. PIAnO, one of the PIDO (Process Integration and Design Optimization) tool, was used to automate analysis procedures and perform a design optimization. In order to assess relation between performances and design variables, we perform the DOE (Design of Experiments). To find the optimal solution, we used Progressive quadratic response surface method (PQRSM), one of the design optimization techniques equipped in PIAnO. As an optimization result, we got an optimal solution and could improve lateral force steer off-center by 43.0% while decreasing brake compliance at wheel center by 8.1%.

• Structural Engineering and Mechanics
• /
• 제75권6호
• /
• pp.747-769
• /
• 2020

This paper provides a semi-analytical approach to investigate the variations of 3D displacement components, electric potential, stresses, electric displacements and transverse vibration frequencies in laminated piezoelectric composite plates based on the scaled boundary finite element method (SBFEM) and the precise integration algorithm (PIA). The proposed approach can analyze the static and dynamic responses of multilayered piezoelectric plates with any number of laminae, various geometrical shapes, boundary conditions, thickness-to-length ratios and stacking sequences. Only a longitudinal surface of the plate is discretized into 2D elements, which helps to improve the computational efficiency. Comparing with plate theories and other numerical methods, only three displacement components and the electric potential are set as the basic unknown variables and can be represented analytically through the transverse direction. The whole derivation is built upon the three dimensional key equations of elasticity for the piezoelectric materials and no assumptions on the plate kinematics have been taken. By virtue of the equilibrium equations, the constitutive relations and the introduced set of scaled boundary coordinates, three-dimensional governing partial differential equations are converted into the second order ordinary differential matrix equation. Furthermore, aided by the introduced internal nodal force, a first order ordinary differential equation is obtained with its general solution in the form of a matrix exponent. To further improve the accuracy of the matrix exponent in the SBFEM, the PIA is employed to make sure any desired accuracy of the mechanical and electric variables. By virtue of the kinetic energy technique, the global mass matrix of the composite plates constituted by piezoelectric laminae is constructed for the first time based on the SBFEM. Finally, comparisons with the exact solutions and available results are made to confirm the accuracy and effectiveness of the developed methodology. What's more, the effect of boundary conditions, thickness-to-length ratios and stacking sequences of laminae on the distributions of natural frequencies, mechanical and electric fields in laminated piezoelectric composite plates is evaluated.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제5권6호
• /
• pp.801-808
• /
• 1999

지금까지, 전기통신망과 장비들의 관리에 대해서는 많은 연구들이 진행되었지만, TMN 상위 계층의 서비스 관리와 비즈니스 관리에 대한 연구는 많이 수행되지 못했다. 최근 전세계적으로 TMN 상위 계층의 관리기능 구현을 위해서 CORBA 기술을 적용하고자하는 관심이 증가하고 있다. 본 논문에서는, 정보모델과 상호운용에 관한 TMN과 CORBA의 주요특징들을 비교하고, TMN 프레임웍와 효율적인 CORBA 기술 연동을 위한 플랫폼 구조를 제안한다. 제안된 구조에서, TMN 관리 정보를 CORBA IDL 인터페이스로 변환해주는 GDMO/ASN.1 - CORBA IDL 변환기가 고안, 구현되었고, JIDM의 상호 작용 변환의 구현을 위해서 TMN/CORBA 게이트웨이 또한 고안되었다. 그리고 이러한 기능의 확장을 위해서 모듈 형식으로 라이브러리들과 코드 생성기들이 설계, 구현되었다.Abstract Up to now, a lot of efforts have been made for the management of telecommunication networks and equipment, but less effort has been made for the realization of higher-layer service and business management. There are recently worldwide growing interests for applying CORBA technology for the realization of higher layer Telecommunication Management Network (TMN) management functions. In this paper, we compare the features of TMN and CORBA with respect to information model, and operational behavior. And then, we propose a platform architecture for the efficient integration of CORBA technology within TMN framework. Within platform architecture, GDMO/ASN.1 to IDL translator has been designed and implemented for translating TMN management information into CORBA IDL interface. The TMN/CORBA gateway is also designed for realization of the interaction translation specification of JIDM task force. The libraries and code generators have been designed and implemented in a modular fashion to provide the functional extensibility.

• 한국과 국제사회
• /
• 제3권2호
• /
• pp.155-182
• /
• 2019

이 글은 아프리카 지역의 정부조직인 차드 분지 호수위원회(LCBC) 회원국이 테러조직인 보코하람의 테러 행위에 맞서기 위해 형성한 다국적군의 활동이 참여국 정치지도자들의 권력 유지에 어떤 영향을 행사하는지 조사했다. 2010년에서 2018년 기간 나이지리아, 카메룬, 니제르, 차드의 정치지도자들과 관련된 데이터를 조사한 결과 이 지역에서 독재국가의 지도자들보다 민주주의 국가의 정치지도자들이 반테러주의 활동의 실패에 대해 더 많은 정치적 비판에 직면한 결과 권력 유지에 실패했음을 파악했다.

• 한국전산구조공학회논문집
• /
• 제33권1호
• /
• pp.9-16
• /
• 2020

본 연구는 쿨롱마찰을 갖는 동적시스템의 기초적인 연구로써 단자유도계의 자유진동응답에 대한 닫힌 해를 제공하는 것을 목적으로 한다. 쿨롱마찰을 포함하는 동적시스템의 운동방정식은 운동방향에 따른 마찰력의 부호변화로 인하여 비선형 미분방정식의 형태로 표현되기 때문에 닫힌 형태의 해를 얻기가 매우 어려운 특성이 있다. 이를 해결하기 위한 기존의 방법으로는 수치적분법에 의해 비선형 미분방정식을 직접 계산하거나 또는, 쿨롱마찰에 의한 감쇠효과를 등가점성감쇠로 치환한 선형 미분방정식을 이용하여 간접적으로 해를 구하는 방법이 사용되고 있다. 그러나 이러한 방법들은 수학적인 측면에서 닫힌 해를 제공하지 않는다. 따라서 본 연구에서는 운동방정식에서 반주기 구간마다 반전되는 마찰력의 부호변화를 고려하고, 이를 멱급수를 이용하여 전 구간으로 확장시킴으로써 쿨롱마찰을 고려한 단자유도계의 자유진동응답에 대해서 수학적으로 닫힌 해를 유도하였다. 또한, 마찰력의 크기가 강성에 의한 복원력의 크기보다 커지는 순간에 자유진동 운동이 정지하는 조건을 이용함으로써 주어진 초기조건에 대해서 예측되는 자유진동 반주기의 수와 운동이 정지하는 순간의 정확한 응답 값을 제안하였다