• 제목/요약/키워드: food safety management system evaluation

검색결과 46건 처리시간 0.028초

Optimization of Maillard Reaction in Model System of Glucosamine and Cysteine Using Response Surface Methodology

  • Arachchi, Shanika Jeewantha Thewarapperuma;Kim, Ye-Joo;Kim, Dae-Wook;Oh, Sang-Chul;Lee, Yang-Bong
    • Preventive Nutrition and Food Science
    • /
    • 제22권1호
    • /
    • pp.37-44
    • /
    • 2017
  • Sulfur-containing amino acids play important roles in good flavor generation in Maillard reaction of non-enzymatic browning, so aqueous model systems of glucosamine and cysteine were studied to investigate the effects of reaction temperature, initial pH, reaction time, and concentration ratio of glucosamine and cysteine. Response surface methodology was applied to optimize the independent reaction parameters of cysteine and glucosamine in Maillard reaction. Box-Behnken factorial design was used with 30 runs of 16 factorial levels, 8 axial levels and 6 central levels. The degree of Maillard reaction was determined by reading absorption at 425 nm in a spectrophotometer and Hunter's L, a, and b values. ${\Delta}E$ was consequently set as the fifth response factor. In the statistical analyses, determination coefficients ($R^2$) for their absorbance, Hunter's L, a, b values, and ${\Delta}E$ were 0.94, 0.79, 0.73, 0.96, and 0.79, respectively, showing that the absorbance and Hunter's b value were good dependent variables for this model system. The optimum processing parameters were determined to yield glucosamine-cysteine Maillard reaction product with higher absorbance and higher colour change. The optimum estimated absorbance was achieved at the condition of initial pH 8.0, $111^{\circ}C$ reaction temperature, 2.47 h reaction time, and 1.30 concentration ratio. The optimum condition for colour change measured by Hunter's b value was 2.41 h reaction time, $114^{\circ}C$ reaction temperature, initial pH 8.3, and 1.26 concentration ratio. These results can provide the basic information for Maillard reaction of aqueous model system between glucosamine and cysteine.

목장형 유가공장의 미생물 분석 및 저감기술 적용 평가 (Evaluation of Microbial Analysis and Application of Reduction Technology in a Dairy Factory)

  • 김종희;이은선;김부민;함준상;오미화
    • Journal of Dairy Science and Biotechnology
    • /
    • 제41권4호
    • /
    • pp.203-210
    • /
    • 2023
  • Bacterial contamination negatively affects the quality, functionality, and safety of dairy products. Adherent populations of bacteria, referred to as biofilms, grow on the surfaces of dairy processing equipment and are the primary cause of dairy contamination. In addition, microorganisms present in the farm environment and dairy factory can contaminate the Clear-In-Place (CIP) line through raw milk transport pipes; therefore, exhaustive management is required. In dairy manufacturing facilities, biofilm formation is controlled using CIP systems that primarily require sodium hydroxide and nitric acid. However, the leakage or incomplete removal of these potently active compounds can be harmful to humans. In the present study, we compared the eradication of Escherichia coli and other bacteria using commercially available combinations of sodium hypochlorite (NaClO) and citric acid, which are recognized by the Korean Ministry of Food and Drug Safety (MFDS) as food disinfectants. When considered in the CIP system of the field manufacturing process, E. coli was not detected (compared to detection before treatment), and other bacteria were detected at 0-32 culture-forming units (CFU)/cm2. The residual amount of chlorine ions after CIP treatment was similar to that in tap water, and there was no significant difference in the overall components of the fermented dairy products. Therefore, the NaClO/citric acid CIP system can be safely applied in dairy manufacturing processes.

쌀의 품질평가 현황과 금후 연구방향 (Trend and Further Research of Rice Quality Evaluation)

  • 손종록;김재현;이정일;윤영환;김제규;황흥구;문헌팔
    • 한국작물학회지
    • /
    • 제47권
    • /
    • pp.33-54
    • /
    • 2002
  • Rice quality is much dependent on the pre-and post harvest management. There are many parameters which influence rice or cooked rice qualitys such as cultivars, climate, soil, harvest time, drying, milling, storage, safety, nutritive value, taste, marketing, eating, cooking conditions, and each nations' food culture. Thus, vice evaluation might not be carried out by only some parameters. Physicochemical evaluation of rice deals with amy-lose content, gelatinizing property, and its relation with taste. The amylose content of good vice in Korea is defined at 17 to 20%. Other parameters considered are as follows; ratio of protein body-1 per total protein amount in relation to taste, and oleic/linoleic acid ratio in relation to storage safety. The rice higher Mg/K ratio is considered as high quality. The optimum value is over 1.5 to 1.6. It was reported that the contents of oligosaccharide, glutamic acid or its derivatives and its proportionalities have high corelation with the taste of rice. Major aromatic compounds in rice have been known as hexanal, acetone, pentanal, butanal, octanal, and heptanal. Recently, it was found that muco-polysaccharides are solubilized during cooking. Cooked rice surface is coated by the muco-polysaccharide. The muco-polysaccharide aye contributing to the consistency and collecting free amino acids and vitamins. Thus, these parameters might be regarded as important items for quality and taste evaluation of rice. Ingredients of rice related with the taste are not confined to the total rice grain. In the internal kernel, starch is main component but nitrogen and mineral compounds are localized at the external kernel. The ingredients related with taste are contained in 91 to 86% part of the outside kernel. For safety that is considered an important evaluation item of rice quality, each residual tolerance limit for agricultural chemicals must be adopted in our country. During drying, rice quality can decline by the reasons of high drying temperature, overdrying, and rapid drying. These result in cracked grain or decolored kernel. Intrinsic enzymes react partially during the rice storage. Because of these enzymes, starch, lipid, or protein can be slowly degraded, resulting in the decline of appearance quality, occurrence of aging aroma, and increased hardness of cooked rice. Milling conditions concerned with quality are paddy quality, milling method, and milling machines. To produce high quality rice, head rice must contain over three fourths of the normal rice kernels, and broken, damaged, colored, and immature kernels must be eliminated. In addition to milling equipment, color sorter and length grader must be installed for the production of such rice. Head rice was examined using the 45 brand rices circulating in Korea, Japan, America, Australia, and China. It was found that the head rice rate of brand rice in our country was approximately 57.4% and 80-86% in foreign countries. In order to develop a rice quality evaluation system, evaluation of technics must be further developed : more detailed measure of qualities, search for taste-related components, creation and grade classification of quality evaluation factors at each management stage of treatment after harvest, evaluation of rice as food material as well as for rice cooking, and method development for simple evaluation and establishment of equation for palatability. On policy concerns, the following must be conducted : development of price discrimination in conformity to rice cultivar and grade under the basis of quality evaluation method, fixation of head rice branding, and introduction of low temperature circulation.

고등학교 「식품안전과 건강」 워크북 개발 및 타당도 검증 (Development and Validation of the 'Food Safety and Health' Workbook for High School)

  • 박미정;정난희;유난숙;최성연
    • 한국가정과교육학회지
    • /
    • 제34권1호
    • /
    • pp.59-80
    • /
    • 2022
  • 본 연구는 「식품안전과 건강」과목의 수업과 평가를 지원할 수 있는 워크북을 개발하고 타당도를 검증하는 데 목적이 있다. 워크북 개발은 「식품안전과 건강」교육과정과 식생활 교육자료, 워크북 관련 선행연구를 분석하여 워크북의 개발 방향을 설정하고, 영역별 활동 아이디어를 도출하여 전체 구성을 설계하였다. 이후 초안을 개발하고 3차에 걸쳐서 교차 검토와 식품의약품안전처의 검토와 수정을 반복하여 편집본을 개발하였고, 9인의 전문가와 44인의 가정과교사들에게 타당도 검증을 받아 수정·보완하여 최종적으로 워크북을 완성하였다. 워크북은 4개 영역으로 '식품선택' 영역의 학습 주제 10개 36차시, '식중독과 식품 관리' 영역의 학습 주제 10개 36차시, '식품의 조리' 영역의 학습 주제 11개 43차시, '건강한 식사' 영역의 학습 주제 11개 55차시로 총 42개 학습 주제 170차시로 구성하였다. 워크북은 실천적 문제해결 역량, 생활자립 역량, 창의적사고 역량, 공동체 역량을 고루 배양할 수 있도록 하였으며, 문제를 인식하고 실험을 통해 문제를 해결하거나 발견학습을 통해 학습과제를 수행하고, 실험한 내용에 대해 심화 탐구학습을 진행하며, 평가를 통해 자가진단을 할 수 있도록 맥락적으로 구성하였다. 워크북의 타당도를 검증한 결과 학생 참여형 수업과 평가를 운영하고, 실험·실습을 강화하여 탐구하는 수업 분위기를 형성하는데 매우 적절한 것으로 평가되었다. 본 연구는 고교학점제 시행과 개별 학생의 학습 선택권이 강조되는 시점에서 가정계열 선택과목의 외연을 확장하고, 탐구 중심으로 학생이 주도하는 교실 수업을 구현하는데 기여할 것이다.

국내 사과원의 재배형태 및 농약 살포방법 조사 (Survey of Planting System and Pesticide Spray Method on Apple Orchards in Korea)

  • 권혜영;홍수명;김상수;백민경;이효섭;김단비;문병철
    • 농약과학회지
    • /
    • 제21권1호
    • /
    • pp.9-16
    • /
    • 2017
  • 국내에서 재배면적이 가장 넓은 과수인 사과에 대하여 전국 주산단지 포함 17개 시 군 지역 395농가를 대상으로 품종, 수관높이, 재식거리 등의 재배형태 및 농약 살포 물량, 살포기의 종류, 사용 노즐의 종류 등 농약의 살포 방법에 대한 조사를 수행하였다. 사과 품종은 Fuji와 Hongro가 79.2%, 50.9%로 주로 재배되었으며, 재배방식은 주로 저수고 고밀식 재배 형태를 보였다(열간거리: 4.0~4.5 m (73.1%), 재식거리: 1.5~3.5 m (88.6%), 수관높이: 3.0~4.5 m (88.2%)). 주로 사용하는 살포기는 스피드스프레이어 77.6%, 동력 분무기 22.1%로 나타났다. 농약의 단위 면적당(10a) 살포물량은 농약을 적게 살포하는 시기인 4월에는 250~300 L, 농약을 많이 살포하는 시기인 6~8월에는 300~400 L를 주로 살포하는 것으로 조사되었다. 재배유형 및 지역간의 살포물량 차이를 분석한 결과 관행재배와 저수고 고밀식재배 유형에서는 유의적인 차이가 나타나지 않았으나 지역별로는 유의적인 차이를 나타냈다. 동력분무기를 사용할 때 주로 사용하는 노즐은 대포노즐 45%, 회전곡자노즐 26%, 2~3구 플라스틱 금속 노즐이 25%로 나타났다. 이상의 결과들은 농가의 현실을 반영한 농약 살포 물량 설정, 농약의 작물 잔류성 자료 및 약효 자료 평가 등 농약의 등록 관련 정책 수립에 기초자료로 활용될 수 있을 것으로 보인다.

곶감의 미생물 및 aflatoxin에 대한 안전성 평가 (Safety Evaluation of Microbiological and Aflatoxin of Traditional Dried Persimmon)

  • 서민경;최송이;이경아;김정숙;정덕화;이수형;박기환;김원일;류재기;김황용;김세리
    • 한국식품위생안전성학회지
    • /
    • 제29권4호
    • /
    • pp.260-267
    • /
    • 2014
  • 본 연구는 국내산 곶감의 미생물 및 aflatoxin에 대한 안전성을 평가하여 곶감의 안전관리의 기초자료로 활용하고자 수행하였다. 본 연구를 위하여 반건시 34농가, 건시 61농가, 감말랭이 10 농가에서 수집하여 수분활성도와 당도, 위생지표세균 (일반세균수, 대장균군, E. coli)과 병원성미생물(Escherichia coli O157:H7, Salmonella spp., Staphylococcus aureus, Listeria monocytogenes, Bacillus cereus), aflatoxin을 조사하였다. 감말랭이, 건시, 반건시의 수분활성도는 각각 0.81, 0.86, 0.91 였으며 당도는 감말랭이 54.9%, 건시 49.5%, 반건시 40.5%로 당도와 수분활성도는 반비례 하였다. 곶감의 일반세균수는 감말랭이 $3.93{\pm}0.96{\log}\;CFU/g$, 건시 $2.12{\pm}0.93{\log}\;CFU/g$, 반건시 $1.50{\pm}1.08{\log}\;CFU/g$로 감말랭이의 오염도가 가장 높았다. 또한 S. aureus는 감말랭이 40.0%, 건시 29.5%, 반건시 23.5%의 시료에서 검출되었고, E. coli는 건시 6.6%, 반건시 2.9%의 시료에서 검출되었다. B. cereus는 건시 39.3%, 반건시 20.6%의 시료에서 검출되었고 검출 수준은 0.7~2.3 log CFU/g이었다. Aflatoxin의 경우는 ELISA법으로 분석했을 때 감말랭이, 건시, 반건시에서 각각 30%, 4.9%, 2.9%가 검출되었고 검출농도는 1.0~1.1 ppb 이었다. ELISA법에서 양성시료를 대상으로 UPLC로 재분석한 결과 aflatoxin은 검출되지 않았다. 본 연구의 결과로 미루어 볼 때 안전한 곶감 생산을 위한 위생관리기술의 개발과 곶감생산 농가의 지속적인 위생교육이 필요하다고 사료된다.

Effectiveness of the Verif $EYE^{TM}$ machine -vision technology for complying with reducing microbial indicator counts on beef carcasses

  • Lee, Jeong-Ah;Kim, Sa-Hyun;Lee, Sang-Koan;Kim, Gi-Cheol;Oh, Hye-Won;Jung, Tae-Nam;Lee, Yang-Soo;Jung, Chang-Jin;Jang, Won-Hyuck
    • 한국동물위생학회지
    • /
    • 제30권2호
    • /
    • pp.191-196
    • /
    • 2007
  • The slaughter process for cattle will inevitably transfer some bacteria onto the carcasses. The goal of food safety programs is to minimize and effectively remove this contamination. This study was attempted by the Verif $EYE^{TM}$ machine-vision technology that might be useful for reducing microbial indicator counts and could reduce the contamination chance of E coli O157:H7 and Salmonella spp on beef carcasses. For the evaluation of the effectiveness of the Verif $EYE^{TM}$ technology, 80 samples were examined by the inspection device over 15 days. On an examination of FDS-positive samples compared to negative controls from the same carcasses, aerobic plate counts were bigger than the negative control samples (5.26 vs 4.60 log). Enterobacteriaceae counts were greater on the positive samples than the corresponding negative control samples (2.07 vs 1.17log). There was a consistent correlation between samples detected by the Verif $EYE^{TM}$ system with detectable counts. For example, 100% of positive samples had detectable APC and 91.2% of positive samples had detectable TCC. Therefore, if areas detected as positive for contamination by the Verif $EYE^{TM}$ system were removed from the carcasses, significant sources of microbial contamination will be reduced for objective compliance with HACCP. This results suggest that the use of Verif $EYE^{TM}$ machine-vision technology might be useful for reducing microbial indicator counts (APC, TCC) and could help reduce the risk of presence of E coJi O157:H7 and Salmonella spp on Beef carcasses.

의약품의 국제적 품질 경쟁력 확보를 위한 의약품실사상호협력기구(PIC/S)와 한국의 GMP 비교연구 (A Study on the Comparison of Korea GMP with PIC/S GMP for Enhancing International Competecy of Medicinal Product Quality)

  • 김정연;권경희
    • 약학회지
    • /
    • 제57권6호
    • /
    • pp.432-441
    • /
    • 2013
  • It's been almost 20 years since the adoption of Good Manufacturing Practices (GMP) in Korea since 1994. There have been big progresses in the GMP regulations and its implementations. 'New GMP' in 2008 has adopted validation, pre-approval GMP evaluation, annual quality review, etc.. Upon the submission of PIC/S (Pharmaceutical Inspection Cooperation Scheme) application by Korea's Ministry of Food and Drug Safety in April, 2012, Korea is facing new opportunity to level up Korea GMP regulations. As such, this study suggested GMP revision points by comparing and analyzing the differences between PIC/S GMP and Korea GMP. Those areas which GMP is not required such as radiopharmaceuticals and medical gases should adopt GMP. And independent GMP regulation is needed for Active Pharmaceutical Ingredients and investigational medicinal products. Also, those regulations shall be implemented in the higher level of legal status. Finally, rather than pursuing GMP harmonization only for PIC/S membership, GMP improvement in the long term shall be taken into consideration by reflecting current quality issues such as ICH Q8 (Pharmaceutical development), Q9 (Quality Risk Management) and Q10 (Pharmaceutical Quality System).

기계학습을 이용한 식품위생점검 체계의 효율성 개선 연구 (Improving Efficiency of Food Hygiene Surveillance System by Using Machine Learning-Based Approaches)

  • 조상구;조승용
    • 한국빅데이터학회지
    • /
    • 제5권2호
    • /
    • pp.53-67
    • /
    • 2020
  • 본 연구는 가공식품의 제조·가공 업소를 대상으로 기계학습 분야의 지도학습(Supervised Learning) 예측 모형을 적용하여 부적합이 예상되는 업체를 사전에 적발하는 단속 선별시스템을 마련하여 단속 활동의 효율성을 높이고자 하였다. 본 연구에서는 머신러닝의 예측 모델링을 위한 목적 정의, 데이터의 기초 분석과 시각화, 특성 변수 도출 및 예측 모형의 선정 및 예측 등으로 기계학습 수행의 표준적인 절차에 따라 연구를 수행하였다. 종속변수는 2014년도부터 2018년까지 과거 5년 동안 지도점검 적발 건수로 설정하였고, 목적함수는 실제 부적합업체를 사전에 판정하여 단속활동이 이루어지는 것을 최대화하는 것으로 하였다. 제조가공업소의 매출액, 영업일수, 종업원 수 등 기본속성뿐만 아니라 과거 지도점검 단속 이력 정보를 반영하여 자료를 재구성하였다. 특성 변수 추출 방법을 적용하여 부적합 판정에 영향을 미치는 업체 위험, 품목 위험, 환경 위험 및 과거 위반 이력 등을 특성 변수로 도출하여 머신러닝 알고리즘을 데이터에 적용하였다. 랜덤포레스트 모형이 식품의약품안전처 지도점검 업무 목적에 가장 적합한 것으로 나타났다. 본 연구결과를 바탕으로 식품안전 관리 국가 사무가 데이터기반의 과학적인 행정 체계로 발전할 수 있는 기반이 되기를 기대한다.

대형할인매장에서의 냉장.냉동식품 판매대의 설정온도와 판매식품 표면온도 비교 및 온도분포 분석 (The Comparison and Distribution of Temperatures Established in Display Stands and Food Surfaces for Cold and Frozen Foods in large Discount Stores in Korea)

  • 최문실;최정애;김미혜;박경진
    • 한국식품위생안전성학회지
    • /
    • 제26권4호
    • /
    • pp.308-314
    • /
    • 2011
  • 대형할인매장에서의 냉장 냉동판매대의 설정온도와 판매중인 냉장 냉동 가공식품류들의 표면온도를 측정하여 비교 분석한 결과 냉장판매대 설정온도 평균은 $3.5{\pm}1.8^{\circ}C$로, 최소 $0^{\circ}C$에서 최대 $7^{\circ}C$까지 분포하며, 냉장식품의 평균 표면온도는 $10.7{\pm}2.9^{\circ}C$로, 최소 $4.6^{\circ}C$와 최대 $18.4^{\circ}C$까지 분포하는 것으로 나타났다. 전체적으로 냉장식품의 표면온도가 설정온도보다 평균적으로 $7.2^{\circ}C$ 높으며, 총 냉장식품의 53%는 표면온도가 $10^{\circ}C$이상으로 나타났으며, 47%만이 $10^{\circ}C$이하로 나타났다. 특히, 야채 및 과일류 등은 온도 차이가 낮았으나 냉장음료류는 온도 차이가 가장 높은 식품군으로 나타났다. 냉동판매대의 경우 설정온도 평균은 $-20.7{\pm}1^{\circ}C$이며, 냉동식품 평균 표면온도는 $-15.4{\pm}5^{\circ}C$로, 최소 $-28^{\circ}C$에서 최대 $-4.6^{\circ}C$(제상중 제품 포함)까지 분포하는 것으로 나타났다. 냉동육류($-13.8^{\circ}C$), 냉동가공식품($-15.9^{\circ}C$), 아이스크림류($-16.8^{\circ}C$) 순으로 낮은 표면 온도를 가지고 있었으며, 실제 냉동식품의 32.3%만이 $-18^{\circ}C$이하의 온도를 나타내는 것으로 조사되었다. 결론적으로 냉장 냉동식품 모두 식품자체의 표면온도가 냉장 냉동 판매대에서 설정된 온도보다 높았으며, 냉장 냉동보관 식품별 온도편차가 다양한 것으로 나타나 유통매장에서 냉장 냉동식품 온도관리에 대한 새로운 관리체계가 마련되어야 할 것이다.