• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.72-75
• /
• 2016

In this paper, we proposes a internal antenna for wireless DVI dongle device using the folded monopole structure. The proposed antenna uses a basic structure of spiral and monopole. The antenna optimized for parameters length, gap, width, and rectangle of folded monopole antenna using the spiral structure. To confirm the characteristics of the antenna parameters, HFSS from ANSYS Inc. was used for the analysis. We used an FR4 dielectric substrate with a dielectric constant of 4.4. The DVI dongle size of the proposed antenna is $50{\times}40{\times}1.6mm$, and the size of the antenna area is $10{\times}40mm$. There is a value of return loss less then -10dB in 2.4GHz and 5.8GHz, band and the maximum antenna gain is -4.13dBi. The utilization possibility of the wireless DVI Dongle antenna have a folded monopole with spiral shape could be confirmed according to compare and analyze the simulation and measurement data.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.1
• /
• pp.5-9
• /
• 2012

In this paper, multi folded dual monopole antenna for WLAN communication of dual bend is designed and fabricated. The proposed multi folded dual monopole antenna are consisted of two folded rectangle loops by microstrip fed that is modified dual monopole antenna. Therefore, the outside rectangle loop structure of the proposed antenna is extended a dual monopole. The characteristics of the proposed antenna is analyzed return loss and radiation patterns by the FDTD tools. As a result a bandwidth of proposed antenna has about 0.82GHz from 2.0 to 2.82[GHz] and 0.7GHz from 5.46 to 6.16[GHz]. It is used WLAN communications of 2[GHz] and 5[GHz].

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.145-151
• /
• 2007

In this paper, a BPF with a dual mode folded ring resonator is presented. The dual mode ring resonator is also exactly analyzed by using Y-parameter method, in which the difference in admittance of two lines make the ring resonator work as a dual mode resonator. The proposed BPF has an advantage of small size compared to conventional one with dual mode ring resonator.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.93-96
• /
• 2000

The theory of non-prismatic folded plate structures was reported by the senior author in 1965 and 1966. Fiber reinforced composite materials are strong in tension. The structural element for such tension force is very thin and weak against bending because of small bending stiffnesses. Naturally, the box type section is considered as the optimum structural configuration because of its high bending stiffnesses. Such structures can be effectively analyzed by the folded plate theory with relative ease. The "hollow" bending member with uniform cross-section can be treated as prismatic folded plates which is a special case of the non-prismatic folded plates. Tn this paper, the result of analysis of a folded plates with one box type uniform cross-section is presented. Each plate is made of composite laminates with fiber orientation of [ABBCAAB]$_r$, with A=-B=$45^{\circ}$, and C=$90^{\circ}$. The influence of the span to depth ratio is also studied. When this ratio is 5, the difference between the results of folded plate theory and beam theory is 1.66%. is 1.66%.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1108-1110
• /
• 1995

This paper presents a balanced CMOS complementary folded cascode OP-AMP topology that achieves improved DC gain using the gain boosting technique, a high unity-gain frequency and improved slew rate using the CMOS complementary cascode structure and a high PSRR using the balanced output stage. Bode-plot measurements of a balanced CMOS complementary folded cascode OP-AMP show a DC gain of 80dB, a unity-gain frequency of 110MHz and a slew rate of $274V/{\mu}s$(1pF load). This balanced CMOS complementary folded cascode OP-AMP is well suited for high frequency analog signal processing applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1127-1133
• /
• 2003

In this paper, we proposed a novel folded multi-strip monopole antenna whose height is reduced using folded strip structure. It has a broadband characteristic and its measured impedance bandwidth ratio is approximately 1.85 : 1, from 4.55 GHz to 8.4 GHz, for VSWR$\leq$2. Proposed antenna has vertically polarized omni-directional conical beam radiation pattern. It maintains about the same radiation pattern over entire bandwidth.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.19-24
• /
• 2024

In this paper, in order to realize lower cut-off frequency of the waveguide, the folded Ridge waveguide (FRWG) is suggested by alternating T-shape structure in the conventional folded waveguide with Y-shape structure. Suggested FRWG can be equivalent by the reverse Ridge waveguide. As the height of side of the FRWG is lower, the width of side is increased. Therefore, the cut-off frequency of the FRWG can be decreased more than half compared with conventional waveguide. The FRWG is designed with the length, height, and width of Y-shape structure of 40mm, 20mm, and 2mm, respectively. Designed FRWG has the cut-off frequency of the 1.996GHz. Also, the transition between the FRWG and SMA connector is designed. The transition is optimized by the capacitance of the signal line of the connector. Its result shows the VSWR under 2:1 in the band of 2.064 ~ 3.050 GHz. Suggested FRWG can be applied with miniaturization of various waveguide devices.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.159-164
• /
• 2004

In this paper, we have proposed the folded feed structure for the spurious harmonic suppression and we have designed the SIR CPW bandpass filter using this feed structure. The characteristic of the proposed feed structure was similar to that of the lowpass filter has wide stopband region and this can be used usefully to the spurious harmonic suppression of the bandpass filter. From the simulation and the measurement result, SIR CPW bandpass filter with folded feed structure has good harmonic suppression characteristics up to 5.8 f$\sub$0/ with -20 dB suppression level.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.489-492
• /
• 2010

This paper proposes the planar-type modified monopole antennas of loop structure. This antenna has an opened center of a conventional closed loop structure with an inside-folded terminal of the loop microstrip line. The size of the proposed antenna was minimized by folding the end of the loop. Also, the reactance value has been minimized by increasing capacitances between the coupled microstrip line. Therefore the proposed antenna has been compacted to about 20% from a conventional loop antenna and has increased its efficiency. The proposed antennas have an omni-directional pattern, the antenna gain was 3.67 [dBi] and the bandwidth was 900 MHz (2.6~3.56 GHz) with VSWR$\leq$2 from the simulated and the measured results. The frequency utilization coefficient was 29.9%. These properties could satisfy the S-DMB band.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.75-79
• /
• 2004

In this paper, a single plane wide band microstrip antenna for integrated circuit as MMIC and LTCC is designed and fabricated. A new configuration for a wide band microstrip antenna with omni-directional pattern is proposed. This antenna consists of two rectangular folded dipoles, which are fed by a coplanar waveguide(CPW). It was effected stabilization ground that a signal plane of CPW feed have been limited ground plane. Therefore, a ground plane of folded structure should be extended outside folded antenna in this research. The characteristics of the proposed antenna were analyzed by using an FDTD methods. The return loss and radiation patterns were simulated and measured. The proposed antenna is get 120MHz bandwidth of PCS band and 250MHz bandwidth of IMT2000 band, used ISM band.