• 한국건축시공학회지
• /
• 제11권6호
• /
• pp.557-566
• /
• 2011

The surfactants facilitate the formation of foam bubbles under a proper condition and provide stability of foam bubbles by decreasing the surface tension of solutions and increasing the viscosity of foam surface. However, there have been almost no practical data of foam concrete in this regard so far. This study aims to understand the effects of foaming agents such as anionic synthetic surfactant and anionic natural material surfactant on the low density foamed concrete. From the experiment, the vegetable soap of anionic natural material surfactants showed a higher foaming rate, more open pores, slightly lower compressive strength, and a higher permeability coefficient compared to the vegetable soap of anionic synthetic surfactants. It is believed that the natural material surfactants make not only the surface tension of the solution low but also the viscosity of slurry high.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.414-422
• /
• 2013

As structure-borne sound, the floor impact sound is one of the serious noises in residential building. Most of heating system applied to the typical Korean residential building is floor heating system which is called ondol. The ondol usually consists of finishing material, mortar with heating coil, light-weight aerated concrete and reinforced concrete. This study focused on the isolation of heavy-weight impact sound and modification of mortar and light-weight aerated concrete. Specifically the glass foam aggregate was added on light-weight aerated concrete. Also, water-cement ratio and amount of cement on mortar were revised. The sound pressure level of heavy-weight impact was measured in reverberation chamber using both bang-machine and impact ball. The size of specimen was 1 m by 1 m. Substitution ratio of glass foam aggregate on light-weight aerated concrete shows relationship with heavy-weight impact sound pressure level. In addition, heavy-weight impact sound pressure level was decreased with increment of water-cement ratio and amount of cement on mortar.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.474-479
• /
• 1998

In this paper, the structural behavior of R.C. multi-layered floor structure including foam concrete layer is numerically analyzed. For the analysis, 3D interface element has been implemented to finite element analysis program to consider the interfacial behavior of multi-layered floor structure which consists of rubber layer, foam concrete layer and mortar layer on RC slab. Based on analysis results on multi-layered structure, its structural behavior is analyzed according to geometrical and material properties of foam concrete. Optimum material property of each layer of the floor structure is proposed to get optimum multi-layered concrete structure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.241-244
• /
• 2005

The existing structural lightweight concrete is almost manufactured by using lightweight aggregate. But most of a lightweight aggregate depends on income, it is wholly lacking domestic utilizer. So in this study we investigate the developmental possibility of structural lightweight concrete using only the aggregate of the general concrete and foam agent. As the result of experiments this paper confirmed the possibility of development of structural lightweight concrete which shows compressive strength 210kgf/$cm^{2}$ and specific gravity 1.8 t/$m^{3}$ using only foam agent

• 콘크리트학회지
• /
• 제9권1호
• /
• pp.173-181
• /
• 1997

본 논문은 경량기포콘크리트의 역학적 특성에 관한 연구이다. 본 연구의 목적은 고분자기포제를 이용하여 초경량성과 타설에 충분한 유동성을 확보하면서 소요강도를 갖는 선기포방식의 경량기포콘크리트의 역학적 특성을 실험적으로 규명하는데 있다. 이를 위해 플로우값이 180mm 이상으로단위체적중량이 0.38~0.64t/$m^3$인 범위에서 30kg/$cm^2$ 정도의 압축강도를 갖도록 개발된 선기포방식의 경량기포콘크리트를 사용하였다. 본 논문에서는 경량기포콘크리트의 탄성계수, 포아송비, 응력-변형률곡선, 강도특성 등의 광범위한 자료를 도출하였고 평균기포크기에 따른 경량기포콘크리트의 역학적 특성을 규명하였다. 본 연구는 경량기포콘크리트의 제조와 설계를 위한 중요한 지표를 제공하여 구조적인 목적에 그 활용의 폭을 넓혀 줄 것으로 기대된다.

• 복합신소재구조학회 논문집
• /
• 제2권4호
• /
• pp.35-43
• /
• 2011

본 연구는 등분포 하중에 종속된 폼내장 콘크리트 샌드위치 패널 (foam insulated concrete sandwich panel)의 구조거동특성을 파악하였다. 유한요소모델이 콘크리트, 폼 그리고 철근의 비선형거동과 연결부재 (connector)의 상세 전단저항거동을 모사하기위해 사용되었다. 개발된 모델은 미주리대학 (University of Missouri)에서 수행된 정적실험자료를 사용하여 검증되었다. 합성 및 비합성 거동이 샌드위치패널의 구조거동에 미치는 영향을 정확히 모사하기 위해 전단연결재의 저항력을 모델에 정확히 반영하는 것이 중요하다. 본 연구에서 개발된 모델은 구조물의 극한강도 및 좌굴이후의 거동까지 모사하였고 미국콘크리트 학회 (ACI)의 설계예제와 비교하였다. 본연구의 결과는 정적 및 동적하중에 종속된 폼내장 콘크리트 샌드위치 패널의 해석및 설계에 유용한 정보를 제공할 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.132-133
• /
• 2014

In this study, high volume of industrial by-products including blast furnace slag, recycled aggregate powder and incineration ash have been utilized on the slurry of the foamed lightweight concrete. As to decrease the price of the lightweight foam concrete, mortar based slurry and concrete based slurry has been fixed. As the variation of the foam conduction ratio and aggregates, the foam ratio and compressive strength has been tested. Results showed that using recycled aggregates in the slurry showed better effect than using natural aggregates due to the alkali properties of the recycled aggregates could activate the potential hydraulic properties of the blast furnace slag. Consider about the low price of the recycled aggregates, it could be identified that using recycled aggregates in high volume blast furnace slag blended lightweight concrete showed better compressive strength than natural aggregates.

• 한국정밀공학회지
• /
• 제34권1호
• /
• pp.35-39
• /
• 2017

We used a construction method using a CNC milling machine, where free-formed molds were made by cutting EPS (Expanded PolyStyrene) foam with the CNC machine, to build free-formed buildings. CNC milling is off-the-shelf technology that can easily cut EPS foam; however its production cost is too high and the time to manufacture an EPS mold is too long. This paper proposes a novel cutting machine with a fast and cost effective mechanism to manufacture EPS concrete molds. Our machine comprises a cutter and Cartesian coordinate type moving mechanism, where the cutter cuts EPS foam using a hotwire in the shape of '$\sqcap$' and is capable of adjusting its cutting angle in real-time while keeping its cutting width. We proved through cutting experiments on the CNC machine that cutting time was greatly shortened compared to the conventional method and that the resulting concrete mold satisfied manufacturing precision.

• Steel and Composite Structures
• /
• 제33권3호
• /
• pp.333-346
• /
• 2019

Foam ceramic materials contribute to the explosion effect weakening on concrete structures, due to the corresponding excellent energy absorption ability. The blast resistance of concrete members could be improved through steel-foam ceramics as protective cladding layers. An approach for the modeling of dynamic response of steel-foam ceramic protected reinforced concrete (Steel-FC-RC) slabs under blast loading was presented with the LS-DYNA software. The orthogonal analysis (five factors with five levels) under three degrees of blast loads was conducted. The influence rankings and trend laws were further analyzed. The dynamic displacement of the slab bottom was significantly reduced by increasing the thickness of steel plate, foam ceramic and RC slab, while the displacement decreased slightly as the steel yield strength and the compressive strength of concrete increased. However, the optimized efficiency of blast resistance decreases with factors increase to higher level. Moreover, an efficient design method was reported based on the orthogonal analysis.

• 콘크리트학회논문집
• /
• 제24권1호
• /
• pp.61-70
• /
• 2012

최근 정부는 '저탄소 녹색성장 기본법'을 시행하여 국가 총체적 차원에서 에너지 절감, 온실가스 저감을 위한 노력을 기울이고 있다. 건물부문에서는 건물외피와 단열재의 열적 특성을 검토하여 건물 자체의 단열성능을 높임으로써 에너지를 절감할 수 있다. 이 연구는 건물부문의 에너지 절감을 목적으로 건물에 적용 가능한 경량기포 콘크리트 단열패널을 개발하기 위한 연구로서, 기포제 종류(AES, AOS, VS, FP)와 기포제 희석농도(1%, 3%, 5%), 기포율(30%, 50%, 70%)에 따른 기포 콘크리트의 물리·역학적 특성 및 열적 특성을 검토하여 에너지 절감을 위한 단열재로서의 최적조건을 찾고자 하였다. 실험 결과, 발포율에 영향을 미치는 기포제가 포함된 수용액의 표면장력은 AOS를 사용한 경우가 다른 기포제를 사용한 경우보다 낮게 나타났다. FP는 표면장력의 저하량이 크지 않고 발포율이 낮기 때문에 저농도로 희석한 경우 다량의 수분을 함유하고 있는 안정적이지 못한 기포가 생성되어 3% 이상 사용하여야만 비교적 안정적인 기포를 만드는 것이 가능하였다. 또한, 압축강도와 열전도율은 저밀도 영역에서는 기포제 종류에 따른 차이는 발생하지 않았으나, 상대적으로 고밀도영역에서 압축강도는 AOS와 FP, 열전도율은 VS와 FP가 더 효과적인 것으로 나타났다. 또한, 기포농도와 기포율이 증가할수록 공극 크기는 커지며 열린공극을 형성하는 것으로 나타났으며 모든 기포제에 대한 열전도율은 KS기준을 만족하여 우수한 단열재로서의 가능성을 보였다. 종합적인 분석 결과, FP를 농도 3%로 사용하여 제조한 시험체가 건물에 적용시 기포 콘크리트 단열패널로서 가장 우수한 성능을 발현할 것으로 판단된다.