• The Journal of Engineering Geology
• /
• v.24 no.2
• /
• pp.191-199
• /
• 2014

We describe a method for detecting slope instability in flume tests using pore pressure and water content data in conjunction with a statistical control chart analysis. Specifically, we conducted univariate statistical analysis on x-MR control chart data (pore pressure and water content) collected at several points along the flume slope, which we separated into three parts: upper, middle, and lower. To assess our results in the context of landslide forecasting and warning systems, we applied control limit lines at $1{\sigma}$, $2{\sigma}$, and $3{\sigma}$ levels of uncertainty. In doing so, we observed that dispersion time varies depending on the control limit line used. Moreover, the detection of instabilities is highly dependent on the position and type of sensor. Our findings indicate that different characteristics of the data on various factors predict slope failure differently and these characteristics can be identified by univariate statistical analysis. Therefore, we suggest that a univariate statistical approach is an effective method for the early detection of slope instability.

• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.99-106
• /
• 2018

Lack of information on the Biochemical Oxygen Demand (BOD) decay rates of river water under the tropical environment has triggered this study with an aim to fill the gap. Raw sewage, treated sewage, river water and tap water were mixed in different proportions to represent river water receiving varying amounts and types of wastewater and fed in a laboratory flume in batch mode. Water samples were recirculated in the flume for 30 h and BOD and Carbonaceous BOD (CBOD) concentrations were measured at least six times. Decay rates were obtained by fitting the measured data in the first order kinetic equation. After conducting 12 experiments, the range of BOD and CBOD decay rates were found to be 0.191 to 0.92 per day and 0.107 to 0.875 per day, respectively. Median decay rates were 0.344 and 0.258 per day for BOD and CBOD, respectively, which are slightly higher than the reported values in literatures. A relationship between CBOD decay rate and BOD decay rate is proposed as $k_{CBOD}=0.8642_{k_{BOD}}-0.0349$ where, $k_{CBOD}$ is CBOD decay rate and $k_{BOD}$ is BOD decay rate. The equation can be useful to extrapolate either of the decay rates when any of the rates is unknown.

• Journal of Korea Water Resources Association
• /
• v.37 no.5
• /
• pp.375-386
• /
• 2004

A water shortage is one of the most important factors for development and management of water resources. For reliable water shortage measurement in a stream, Korea Water Resources Corporation(KOWACO) founded five foot Parshall flume at Yong-dam experimental watershed in 2000. The Parshall flume has a specially designed shape to facilitate flow measurements by eliminating sediment deposition problem that could lead to an incorrect measurement. In this study, computational fluid dynamics(CFD) model was used to analyze flow behavior of Parshall Flume under free discharge of five headwater level cases. The flow rates computed by CFD model are compared with those by ISO's formula, USBR's formula and stage-discharge rating curves. Flow rates computed by ISO's and USBR's formula are mostly same, but flow rate by CFD model is larger than empirical value by 9% and flow rate by stage-discharge rating curves is less than empirical value by 16%.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.37-42
• /
• 2001

This paper proposes a new wave absorber made of flexible net structures. The motivation of this research is that the wave absorbers which already invented are not effective in small wave flume. To test the efficiency of the proposed water absorber, experiments were done for various wave length, the length of the wave absorber, and the areas of the wave absorber. The proposed new wave absorber demonstrated its efficiency when used in small-length wave flume.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2002.08a
• /
• pp.1-13
• /
• 2002

For design of maritime structure, it is necessary to evaluate the effect and stability of the structure against wave action. Laboratory model experiments and their empirical formulas are mainly used to estimate those at present, although empirical formulas have a problem of accuracy and hydraulic experiments of cost and duration. In addition, performance-based design, which may be popularized as a new design concept in the near future, requires much more information than that obtained by empirical formulas and laboratory tests. Thus, numerical simulation may become more important hereafter for structure design. (omitted)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.370-374
• /
• 2016

We investigated the three dimensional turbulent flow characteristic around a sidewall-mounted rectangular block using a laboratory flume experiment. The experiment was conducted in the flume which is 18m long and 0.9m wide, and a rectangular block that is 0.3m wide and a height of 0.4m and 0.004m thick is mounted on a sidewall of the flume. Velocity data were collected using Acoustic Doppler Velocimeter(ADV) for the flow rate conditions : $0.0528m^3/s$. The time-averaged velocity and water depth data were analyzed to examine the three-dimensional flow patterns downstream of the rectangular block.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1777-1783
• /
• 2013

Parshall flume is more practical one of hydraulic structures for measuring flowrate in open channels and also has more advantages when the magnitude of flow velocity is relatively lower or much more sediments are brought from upstream. International Organization for Standardization (ISO) has suggested the empirical formulas standardized by the sizes and dimensions of Parshall flume. However, the related studies using the numerical simulations and experiments are relatively rare. Therefore, in this study, it was examined whether the numerical simulation was adequacy for reproducing the hydraulic characteristics of Parshall flume as much as laboratory experiments by comparing the results from numerical simulations and empirical equation. And for arbitrary Parshall flume, that is unlisted in the ISO standards due to environmental conditions, constructional difficulties etc, thus, the hydraulic experiments should be conducted to obtain the empirical formulas for it, the results from numerical simulations were compared with those of laboratory experiments. Consequently, it was convinced that the numerical simulation about Parshall flume was simulated appropriately instead of experimental approach. And the dimensionless discharge equation of arbitrary ones was suggested using the results of numerical simulations, and the equation was validated by comparing with laboratory experimental results showing the maximum relative error of 2.3%. If the actual topography, the shape of inlet and submerged flow, which is excluded in this study, were carefully considered, it would be possible to supply a simple empirical discharge equation based on numerical results. Also, it can replete hard works for hydraulic experiment being error-prone with complex procedures to a minimum of economic effort.

• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.541-552
• /
• 2019

In this study, landslide flume tests were performed to analyze characteristics of ground characteristics and landslide occurrence due to rainfall infiltration. As test materials, weathered granite soil and gneiss soil, the most frequent landslides in Korea, were used, and landslides were triggered by heavy rain (Intensity = 200 mm/hr). The measurement sensors were installed with 3 sets at toe, slope, top part and shallow (GL-0.2 m), middle (GL-0.4 m), and deep (GL-0.6 m) depth in the slope and measured at 10 second intervals. After landslide flume tests, the slope stability analysis was performed by applying the unsaturated soil theory based on the change of ground characteristics and compared with actual landslide occurrence from flume test. As a result of the analysis, factor of safety reflected the landslide occurrence from flume test and factor of safety decreased as rainfall infiltration, leading to slope failure. Finally we compared to the factor of safety below 1 and actual landslide occurrence time, the average difference was 1,600 seconds for weathered granite soil and 5,400 seconds for weathered gneiss soil.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.6
• /
• pp.32-36
• /
• 2002

This paper presents the results of wave profile detection from video image using the Mexican hat function. The Mexican hat function has been extensively used in the field of signal processing to detect discontinuity in the images. The analysis was done on the numerical image and video images of waves that were taken in the small wave flume. The results show that the Mexican hat function is an excellent tool for wave profile detection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.382-389
• /
• 2018

Recently cyber attacks can cause serious damage on various information systems. Log data analysis would be able to resolve this problem. Security log analysis system allows to cope with security risk properly by collecting, storing, and analyzing log data information. In this paper, a security log analysis system is designed and implemented in order to analyze security log data using the Logstash in the Elasticsearch, a distributed search engine which enables to collect and process various types of log data. The Kibana, an open source data visualization plugin for Elasticsearch, is used to generate log statistics and search report, and visualize the results. The performance of Elasticsearch-based security log analysis system is compared to the existing log analysis system which uses the Flume log collector, Flume HDFS sink and HBase. The experimental results show that the proposed system tremendously reduces both database query processing time and log data analysis time compared to the existing Hadoop-based log analysis system.