• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.821-827
• /
• 2016

This study evaluates the economic feasibility of industrializing fluidized bed dryer for wood particles. The theoretically required heat energy and energy efficiency were evaluated using a pilot scale fluidized bed dryer. When Mongolian Oak wood particles with 50% initial moisture content were dried in the fluidized bed dryer with air of $70^{\circ}C$ air circulating at 1.1-1.3 m/s for 30 minutes, the total theoretically required heat energy was 2,177 kJ. Of this, 1,763 kJ (approximately 81.0%) was used to heat the air flowing in from outside the dryer and 386 kJ (approximately 17.7%) was used to heat and remove water from the wood particles. Actual energy consumed was 7,560 kJ, giving energy efficiency of 28.8%. Thus, to industrialize a drying method such as fluidized bed drying, where the dryer volume is significantly larger than the volume of wood particles, it is necessary to minimize energy loss and maximize energy efficiency by designing the dryer size considering the amount of wood particles and choosing a suitable air circulation rate.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.201.2-201.2
• /
• 2011

A water-source heat pump system has been developed for cooling and heating of a green house on the waterfront in Jinju. In order to supply a heat source/sink of water in alluvium aquifer to the heat pump system, the riverbank filtration facility (two pumping wells and one recharge well) for water intake and injection has been constructed. To pump and recharge water sufficiently, the geometric design such as depth and diameter for the wells have been completed, and details of the well such as slot size and length of the screen and filter pack size have been designed based on the practical and theoretical design method including D30 technique. For the investigation of the hydrogeological characteristics, step-drawdown test, long-term pumping test, and recovery test have been carried out for two developed pumping wells. Step-drawdown test has been performed on 4 step flowrates of 150, 300, 450, $600m^3$/day for 1 hour, and long-term pumping test on flowrate of $500m^3$/day for 24 hours, and recovery test for 6 hours. Since the underground water filtrated by riverbank is flowing smoothly into the well, the water level goes down slightly for the long-term test. Consequently, the stable pumping flowrate for two pumping well has been predicted at least over $1,647m^3$/day which is larger than the flowrate of $1,000m^3$/day for a 60 RT heat pump system.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.25-36
• /
• 2018

Drip irrigation system is a low energy cost method which can efficiently save and supply water by dropping water slowly on the crop's root zone during crop growth. In the drip irrigation system, disk filters take an important role to physically remove impurity (inorganic and suspended organic) particles present in agricultural water which can cause emitter clogging. For the purpose, both top-and-bottom surfaces of the disk are grooved in micron size flowing from outside to inside. However, many congested flow paths in disk filter media incur higher head loss of inflow water resulting in relatively decreasing velocities depending on operation time than sand and mesh filters. Therefore, it is important to optimize the structure of disk filter in micro irrigation system. The head loss of disk filter media takes also charge of more than 60 % of total head loss in whole disk filter. This study is to find the appropriate cross-sectional shape of the disk groove to minimize the head loss by executing the experiment. The experiment used three disk filters that have similar filter body but have a half-elliptic and two kinds of triangular cross sections. The experimental results showed that the disk filter with half-elliptic cross sections of disk grooves have less head loss than the disk filter with regular triangular one.

• Archives of design research
• /
• v.11 no.3
• /
• pp.69-76
• /
• 1998

The purpose of this study is to present a method of preparing for a more enduring built environment, being fully aware that, in consideration of time flowing from past to present, there is no ardlitecture in creation that is not abandoned. Efforts were made to find the problem solutions in relation to the hierardlial structure, evolvement and adaptation of living beings. The process of study was as follows, ·The built environment's affordance to human beings and the designer's role was explained. ·Having an understanding of the necessity of user minded planning, the architectural adaptation of the multi-layered hierarchy system of holon theory and adoption of time conception into architectural space were examined to explain that the importance in ardlitecture should be placed in transition, not in perfection. ·The design of Parc de La Villette by Bernard Tsdlumi was analysed from the above viewpoint. Having a practical case analysed, this study is expected to offer a basic information for use in case of visual presentation of a theoretical viewpoint.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.124-129
• /
• 2010

When a phenolic resin is carbonized by the leakage current flowing along its surface, the carbonization pattern is one of the most important factors to determine its carbonization characteristics. However, the typical carbonization pattern of a phenolic resin is too complicated to be analyzed by conventional Euclidean geometry. In most cases, such a complicated shape shows a fractal structure. It is possible, therefore, to examine the characteristics of the carbonization pattern regarding a given phenolic resin. In order to quantitatively investigate the carbonization pattern of the phenolic resin carbonized by a leakage current, in this paper, the fractal dimension of the carbonization pattern has been calculated as a function of the magnitude of a leakage current and the distance between two electrodes. For reliability of calculation, the correlation function as well as the box counting method has been used to calculate the fractal dimension. According to the result of calculation, the fractal dimension increases as the current increases at the constant electrode gap distance. However, there is no significant relation between the fractal dimension and the electrode gap distance at a constant current.

• Ocean and Polar Research
• /
• v.26 no.4
• /
• pp.595-606
• /
• 2004

Hydrographic survey in the Korea Strait has long history that has begun in August 1917 at the Busan - Tsushima cross section, still continues to date. However, chemical properties of bottom cold water found exclusively in the western channel of the Korea Strait during summer did not receive much scientific attention. The aim of the study is to decipher the enigmatic origin of the Korea Strait Bottom Cold Water (KSBCW) in terms of chemical properties. The physicochemical properties of the KSBCW are extracted from the CREAHS II hydrographic data. OMP method was applied to analyze origin of the KSBCW quantitatively. The KSBCW is well defined by low temperature below $10^{\circ}C$. The cold waters exhibited the local presence near the coast at about 120m depth with a thickness of 20m to 30m. The cold water was characterized by relatively cold, saline and higher chemical concentrations than adjacent waters. The KSBCW seems to have different origin kom that of the coastal upwelled waters at the Ulgi-Gampo because it is saline, denser and contains considerably less dissolved oxygen than upwelled waters. The physicochemical properties are reported to have noticeable annual variations which suggest the complex origin of the KSBCW. OMP analysis show that the KSBCW is a mixture of three water types; TMW (24%), ESIW (36%) and ESPW (40%). Relationship between the KSBCW and the east Sea circulation is traced by mapping the water masses that have similar T, S and DO of KSBCW. The result showed that the KSBCW is most possibly an extension of southward flowing coastal intermediate waters. Front these results, we expect that the monitoring KSBCW will provide us valuable information about the East Sea circulation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.1
• /
• pp.33-47
• /
• 2013

When a bomb explodes near a tunnel, generated muck should be quickly moved outside for rehabilitation of the tunnel. In this study, the amount of muck generated by an explosion was estimated and a methodology was presented for the prediction of the muck hauling time. To this end, 3D-meshes were made by using SoildWorks and blasting analyses were performed by using AUTODYN. A method was suggested to calculate theoretically the amount of muck which inflows into a tunnel based on the relationship between the tunnel and the fragmentation zone obtained from the analysis results. Also, muck hauling times were predicted based on the selection of construction equipment and the results were compared and analyzed. As a result, it was convinced that the amount of muck flowing into the tunnel could be effectively calculated by classifying the relationship between a tunnel and the fragmentation zone into 4 cases and using the mensuration by parts. Also it was confirmed that the closer blasting location is to the portal and the excavation surface of a tunnel, and the more blasting location deviates from the center line of the tunnel, the lesser amount of muck occurs and thus the muck hauling time decreases as well.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.265-269
• /
• 2006

Anti-Roll Tanks, also called Sloshing Tanks, is a rather common and sometimes an efficient method of limiting the roll angles. The important parameters, when considering using anti-roll tanks, are positioning, size, duct area, flow control device etc. Measurement by the PIV(Particle Image Velocimetry) was conducted to investigate the flow characteristics around control damper and inlet area of duct for three kind of inclined angle $(\alpha=0^*,\;10^*\;and\;20^*)$. Flow behaviors such as instantaneous and time-mean velocity vectors are investigated. Furthermore, to reveal boundaries between flowing and stagnant zones and to extract velocity profiles at any selected sections of the lower duct for passive anti-rolling tanks system.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.53-58
• /
• 2006

Along with the development of costal engineering, various type of breakwaters have been built. The main purpose of breakwaters are to provide harbour protection against waves, to stabilize beaches against erosion due to large wave action, and to provide for temporary wave protection for installation on or under water surface. This paper an application example of PIV system for analyzing the flow of Floating Breakwater with double barriers. We introduce an analysis method to predict the characteristics of flow around the neighboring fields of Floating Breakwater with double barriers in order to develop a high performance model. Flow visualization has conducted in circulating water channel by a high speed camera and etc. Flowing phenomenon according to velocity distribution and flow separation around the breakwater with double barriers were obtained by 2-D PIV system.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.426-431
• /
• 2015

Korea severely suffers from plastic-induced ocean pollution, but only few studies predicted the trajectory of marine plastic debris and provided their collection method. This study used Ocean Surface CURrent Simulator (OSCURS) of National Oceanic and Atmospheric Administration (NOAA) in order to predict the trajectories of marine plastic debris flowing into the East Sea and Yellow Sea for each season during 2004 to 2013. Results suggest that efficient collection hubs through the high betweenness centrality index. Most hubs were located in the seashores regardless of season, suggesting the seashore of Uljin for the East Sea and the seashore between Saemangeum and Shinan for the Yellow Sea as the most efficient hubs.