• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.267-270
• /
• 1999

In this paper, the application of limestone powder, which produced by being gathered electrically in the process of manufacturing of cement, to high fluidity concrete are investigated. According to the experimental results, especially, high viscosity and the loss of air content are accomplished by applying limestone powder as the partial substitution of fine aggregates. In case of hardened concrete, high compressive strength can be achieved by using limestone powder.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.83-88
• /
• 1999

The purpose of this study is to offer the basic information of waterproofing admixture of powder for field application. Through before study and fly ash in mortar, Various properties as fly ash ratio in concrete were checked. According to the experimental result, it was shown that proper Waterproofing admixture of powder increased by cement weight in concrete was generally positive effect to flowing, compressive strength, suction ratio of water, length change ratio. So if Waterproofing admixture of powder is well done quality considered as good on application of concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.292-297
• /
• 1997

Concrete structure which placed aggressive marine environment must have proper durablity. Portland cement type V has been used for this purpose. However, besides this, flowability was required in specific part. (highly congested reinforced part, hard to vibrating part, etc.) For this purpose concrete mixtures were made with potland type V and specific amount of pozzolan material and tested structural properties including flowabilily and durability.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.73-74
• /
• 2017

In this study, unlike high flowing concrete, using glass bubble to develop self-compacting concrete(hereinafter referred to as "SCC") with excellent filler performance by evaluating both flowability and yield stress, viscosity An experiment was conducted. Experimental results show that when 1 kg of glass bubbles are used, it is effective in stabilizing the physical properties of concrete, reducing the yield stress and viscosity.

• 레미콘
• /
• 6호통권12호
• /
• pp.2-10
• /
• 1987

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.23-26
• /
• 2003

This study is intended to investigate the properties of early strength development by application of TEA to the field. According to the results, when TEA is added, fluidity is almost same to base concrete, and increases upto aimed slump after field flowing. Setting time does not differ in the case of base and TEA, but retarded after flowing. The time when compressive strength gains 5 MPa, which side form can be removed, is 23 hours, and so the removal time is shortened by I hours in comparison with plain concrete. But compressive strength is almost same to that of plain concrete at 28 days. The rebound value of P type schmidt hammer show similar tendency to compressive strength, and the rebound value of structure is higher than that of standard curing specimen due to heat capacity effect and drying by the air outside. Therefore, it is thought that if the rebound value of P type schmidt hammer is controled. by about 26 in consideration of open air environment, it is very effective to determine the removal time of side forms.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.23.1-26
• /
• 2003

This study is intended to investigate the properties of early strength development by application of TEA to the field. According to the results, when TEA is added, fluidity is almost same to base concrete, and increases upto aimed slump after field flowing. Setting time does not differ in the case of base and TEA, but is retarded after flowing. The time when compressive strength gains 5 MPa, which side form can be removed, is 23 hours, and so the removal time is shortened by 1hours in comparison with plain concrete. But compressive strength is almost same to that of plain concrete at 28 days. The rebound value of P type schmidt hammer show similar tendency to compressive strength, and the rebound value of structure is higher than that of standard curing specimen due to heat capacity effect and drying by the air outside. Therefore, it is thought that if the rebound value of P type schmidt hammer is controled. by about 26 in consideration of open air environment, it is very effective to determine the removal time of side forms.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권3호
• /
• pp.126-135
• /
• 2013

교량의 장대화로 고품질과 양호한 시공성을 갖는 고유동성 매스콘크리트가 프리스트레스 콘크리트 거더에 광범위하게 사용되고 있으나, 수화열과 자기수축에 의한 비구조균열을 종종 발생하고 있다. 대상부재의 콘크리트응력에 대한 다양한 실험과 수치해석을 통하여 평가로부터 메스콘크리트의 수화열 증가에 따라 인장응력 및 균열지수를 예측하였다. 또한 분체계 혼화재료에 의한 자기수축 증가는 정착부 부근 매스콘크리트의 인장응력을 가중시킨다. 수화열과 자기수축 및 건조수축에 의한 인장응력은 PSC 거더의 대부분에서 약간의 응력증가를 나타내나, 정착부 근처의 인장응력은 콘크리트의 재령초기에 인장강도를 초과하게 되어 균열을 유발하게 됨을 알 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권6호
• /
• pp.198-204
• /
• 2010

콘크리트 믹서트럭의 덮개는 레미콘 플랜트에서 공사 현장까지의 운반 도중 굳지 않은 콘크리트의 유동성이 저하하지 않도록 사용하는데, 설문 결과 일반시민들에게 더러운 이미지를 주고 있다. 이러한 이미지로 인해 건설 산업 전체의 이미지에도 영향을 미칠 것으로 예상하여 덮개의 효용성 여부를 밝히기 위해 레미콘을 현장에 대기시켜 둔 채 유동성을 비롯한 공기량, 콘크리트 온도변화 등의 현장 실험을 실시하였다. 또한 이와 비교를 위해 동일한 조건으로 실내 실험을 병행하여 결과를 도출하였다. 실험 결과, 믹서트럭의 덮개는 슬럼프 저하에 미치는 영향이 적은 것으로 나타났다. 공기량 변화는 덮개 유무에 관계없이 60분까지는 적정한 수준으로 품질에 큰 영향을 미치지 않는 것으로 나타났다. 또한 콘크리트 압축강도는 덮개 유무에 관계없이 90분까지의 시료의 경우에 목표설계기준강도에 모두 적합한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.127-132
• /
• 1998

The purpose of this study is to find mechanical properties of fly ash ratio in mortar as flowing, setting time, compressive strength, suction ratio of water, length change ratio. As a result, it was shown that proper fly ash ratio replaced by cement weight in mortar was generally positive effect to flowing, compressive strength suction ratio of water, length change ratio. So if fly ash is well done quality control is considered as good replacement of cement.