• Educational Technology International
• /
• v.19 no.1
• /
• pp.35-60
• /
• 2018

The purpose of this study was to analyze the types of lesson and its effectiveness with digital textbook. To address those goals, we had observed five classes of the primary school, which designated as a research pilot school for digital textbook. Based on the result of observation, 3 types of lesson with digital textbook were categorized: Teacher-directed lecture (type 1), Blended learning (type 2), and Flipped learning (type 3). Depending on the type of lesson was analyzed the positive and negative effectiveness by means of matrix analysis method. As a result, in Teacher-directed lecture (type 1), there was found out the participation of the lesson in atmosphere of stable and comfortable as positive experience, also digital textbook operating immature and boring as negative experience. In Blended learning (type 2), there was found out the fun by sharing the product and peer feedback, and flow by learning transfer as positive experience, also digital textbook operating immature and understanding the difference between assignments as negative experience. In Flipped learning (type 3), there was shown the positive attitude and ownership in the lesson as positive experience, also distracting and boring in the lesson when learner was excluded in participation as negative experience. Based on the results, we suggested some strategies for improving positive experience and protecting negative experience in the lesson with using digital textbook.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.92-96
• /
• 2015

Due to unique characteristics of small construction companies, safety management is comprised of complex problems (e.g., resources constraints, a lack of formalized management structures, low level of management safety commitment etc.). In order to understand causal interdependencies between safety factors at different system levels (regulation, organization, technical and individual), this paper aims to develop a system dynamics (SD) model of safety management in small construction companies. The purpose of the SD model is to better understand why small construction companies have low level of safety performance. A causal loop diagram (CLD) was developed based on literature, with an attempt to map causal relationships between variables. The CLD was then converted into stock and flow diagram for simulation. Various tests were conducted to build confidence in the model's ability to represent the reality. A number of policies were analyzed by changing the value of parameters. The value of a system dynamics approach to safety management in small construction companies is its ability to address joint effects of multiple safety risk factors on safety performance with a systems thinking perspective. By taking into account feedback loops and non-linear relationships, such a system dynamics model provides insights into the complex causes of relatively poor safety performance of small construction companies and improvement strategies.

• East Asian mathematical journal
• /
• v.39 no.4
• /
• pp.455-478
• /
• 2023

Expectations and interests in blended learning are increasing as universities respond to the educational flow of transition to e-lernring. This study tried to explore and understand the meaning of and the properties of blended instruction. In addition, through the literature review, this study was to find out how bleanded learning affected in teaching and learning situation. Particularly, it was to find out students' preference to the type of blended instruction. Those types are the mixed of or the unique of class instruction(off line), on line, and recorded instruction. To investigate learners' preference to the type of the instruction and also the reason of the preference, in this study, the 27 undergraduate students of the fourth grade in the major of mathematics education in the C university located in G area. By the result, most students preferred the mixed type of instruction involving off line and recorded instruction. The reason is that they could attend to the class while participating in the group activity positively and understand the content through the communication in depth and the instructor's feedback. Because of this reason, they did not prefer to the only one type insturction such as the recorded type.

• Wind and Structures
• /
• v.38 no.3
• /
• pp.161-170
• /
• 2024

In recent years, there have been an increasing number of experimental studies showing the need to include robustness criteria in the design process to develop complex active control designs for practical implementation. The paper investigates the crosswind aerodynamic parameters after the blocking phase of a two-dimensional square cross-section structure by measuring the response in wind tunnel tests under light wind flow conditions. To improve the accuracy of the results, the interpolation of the experimental curves in the time domain and the analytical responses were numerically optimized to finalize the results. Due to this combined effect, the three aerodynamic parameters decrease with increasing wind speed and asymptotically affect the upper branch constants. This means that the aerodynamic parameters along the density distribution are minimal. Taylor series are utilized to describe the fuzzy nonlinear plant and derive the stability analysis using polynomial function for analyzing the aerodynamic parameters and numerical simulations. Due to it will yield intricate terms to ensure stability criterion, therefore we aim to avoid kinds issues by proposing a polynomial homogeneous framework and utilizing Euler's functions for homogeneous systems. Finally, we solve the problem of stabilization under the consideration by SOS (sum of squares) and assign its fuzzy controller based on the feasibility of demonstration of a nonlinear system as an example.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1116-1123
• /
• 2024

-In recent years, unmanned underwater vehicles (UUV) have been vigorously developed, and with the continuous deepening of marine exploration, traditional energy can no longer meet the energy supply. Nuclear energy can achieve a huge and sustainable energy supply. The heat pipe reactor has no flow system and related auxiliary systems, and the supporting mechanical moving parts are greatly reduced, the noise is relatively small, and the system is simpler and more reliable. It is more favorable for the control of unmanned systems. The use of heat pipe reactors in unmanned underwater vehicles can meet the needs for highly compact, long-life, unmanned, highly reliable, ultra-quiet power supplies. In this paper, a heat pipe reactor scheme named UPR-S that can be applied to unmanned underwater vehicles is designed. The reactor core can provide 1 MW of thermal power, and it can operate at full power for 5 years. UPR-S has negative reactive feedback, it has inherent safety. The temperature and stress of the reactor are within the limits of the material, and the core safety can still be guaranteed when the two heat pipes are failed.

• The Korean Journal of Physiology
• /
• v.19 no.2
• /
• pp.139-153
• /
• 1985

The passive tilt has been performed to study the orthostasis on the cardiovascular system. The orthostasis due to upright tilt was demonstrated as follows: the venous return, cardiac output and systemic arteiral blood pressure were decreased, whereas there was concomitant increase of heart rate, through the negative feedback mediated by such as the baroreceptor . Previous investigators have suggested that the tolerance to the orthostasis could he increased by blocking the cholinergic fiber with atropine which prevented vasodilation and bradycardia through the vasovagal reflex during the orthostasis. However, this hypothesis has not been clearly understood. This study was attempted to clarify the effect of atropine on the tolerance of the cardiovascular system to the upright and head-down tilt, and to investigate the change of the blood flow through head and lower leg with Electromagnetic flowmeter in both tilts before and after atropine state. Fourteen anesthetized dogs of $10{\sim}14kg$ were examined by tilting from supine position to $+77^{\circ}$ upright position (orthostasis), and then to $-90^{\circ}$ head-down position (antiorthostasis) for 10 minutes on each test. And the same course was taken 20 minutes after intravenous administration of 0.5mg atropine. The measurements were made of the blood flow(ml/min.) on the carotid artery, external jugular vein, femoral artery and femoral vein. At the same time pH, $PCO_2$, $PO_2$ and hematocrit (Hct) of the arterial and venous blood, and heart rate(HR) and respiratory rate (RR) were measured. The measurements obtained from upright and head-down tilt were compared with those from supine position. The results obtained are as follows: In upright tilt, the blood flow both on the artery and the vein through head and lower leg were decreased, however the decrement of blood flow through the head was greater than the lower leg And the atropine attenuated the decrement of the blood flow on the carotid artery, but not on the vessels of the lower leg. HR was moderately increased in upright tilt, but slightly in head-down tilt. The percent change of HR after the atropine administration was smaller than that before the atropine state in both upright and head-down tilts. Before the atropine state, RR was decreased in upright tilt, whereas increased in head-down tilt. However after the atropine state, the percent change of RR was smaller than that of before the atropine state in both upright and head-down tilts. In upright tilt, venous $PCO_2$ was increased, but arterial $PO_2$ and venous $PO_2$ were slightly decreased. Hct was increased in both upright and head-down tilts. The findings of blood $PCO_2$, $PO_2$ and Hct were not interferred by the atropine. In conclusion, 1;he administration of atropine is somewhat effective on improving the cardiovascular tolerance to postural changes. Thus, atropine attenuates the severe diminution of the blood flow to the head during orthostasis, and also reduces the changes of HR and RR in both orthostasis and antiorthostasis.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.151-158
• /
• 2012

This study aims to suggest ways of experiential marketing management plan that the virtual tour service in the internet shopping mall is as a agents and the role of the physical interface of the internet virtual experience. It is a empirical analysis to analyze the relationship among Schmitt's five experiential Marketing elements. By the result, the rankings for high impact experiential marketing feedback relationship of cognitive creativity, composition, relationship between social intimacy, behavioral lifestyle, providing a sense of the acoustic auditory effect, a sense of dimensional visual effects in order. This result means that the intimacy and creativity, giving feedback that the opinion of consumers actively prefer internet shopping mall. In addition, it means more visual rather than auditory experience to provide marketing services and provide the lifestyle behaviors that the customer want in the Internet shopping mall. It is needs to make virtual experiential marketing relationships, strengthen the recognition specificity of these results because of experiential marketing relationship's ultimate purpose is to make the relationship between brand and customer service satisfaction of the Internet shopping mall through strengthening the relationship.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11A
• /
• pp.1263-1270
• /
• 2004

A low-power 64-point FFT/IFFT processor core is designed, which is an essential block in OFDM-based wireless LAM modems. The radix-2/418 DIF (Decimation-ln-Frequency) FFT algorithm is implemented using R2SDF (Radix-2 Single-path Delay Feedback) structure. Some design techniques for low-power implementation are considered from algorithm level to circuit level. Based on the analysis on infernal data flow, some unnecessary switching activities have been eliminated to minimize power dissipation. In circuit level, constant multipliers and complex-number multiplier in data-path are designed using truncation structure to reduce gate counts and power dissipation. The 64-point FFT/IFFT core designed in Verilog-HDL has about 28,100 gates, and timing simulation results using gate-level netlist with extracted SDF data show that it can safely operate up to 50-MHz＠2.5-V, resulting that a 64-point FFT/IFFT can be computed every 1.3-${\mu}\textrm{s}$. The functionality of the core was fully verified by FPGA implementation using various test vectors. The average SQNR of over 50-dB is achieved, and the average power consumption is about 69.3-mW with 50-MHz＠2.5-V.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.469-478
• /
• 1997

This study was conducted to develop an automatic nutrient-solution mixing system for small-scale sewers. The nutrient-solution mixing system consisted of a low-cost and precise metering device and data acquisition ＆ control system with a personal computer. and, the metering device was composed of three parts those were supply pumps, metering cylinders and venturi tube. The system controlled electric conductivity(EC) and pH of nutrient-solution based on the time-based feedback control method with the information about temperature, EC, and pH of the nutrient-solution. The performance of the nutrient-solution mixing system was evaluated through the control of EC and pH while compared with those of commercial system. Also an experimental cultivation of tomato was conducted to verify and to improve the developed system. Results of this study were as follows. 1. The correlation coefficient of meteing device between the flow rate and operating time was 0.9999, and the linear reuession equation computed was y=21.759x, where y is the discharge($g$) and x is the operating time(s). 2. Calculated errors for the developed metering device and two commercial pump were $\pm$0.3% $\pm$2.45% and $\pm$1.38 % FS error respectively. 3. An automatic nutrient-solution mixing system based on a low-cost and precise metering device was developed. 4. The full scale errors of the developed system in controlling EC and pH at 23$\pm$1$^{\circ}C$ were $\pm$0.05mS/cm and $\pm$0.2, respectively 5. When using the commercial system, the controlled values of EC and pH of the 500 $\ell$ of water were 1.29 mS/cm and 6.1 pH for the setting points of 1.4 mS/cm and 6.0 pH respectively at 23$pm1^{\circ}C$. 6. The developed nutrient-solution control system showed $\pm$0.05 ms/cm of deviation from the setting EC value over the experimental cultivation period. 7. The deviation from the average values of Ca and Mg mass content in the several nutrient-solution were 0.5% and 1.8% respectively.

• Journal of Digital Convergence
• /
• v.6 no.3
• /
• pp.45-52
• /
• 2008

For the domestic digital contents, it is particularly important that the planning and mediating functions should cover the whole Industries so that dividends and assistance to reach all the way back to the primary contents-creating level, where economic risks are especially high. A proactive cooperation system or framework between the government, the businesses and research institutions, which would allow for free flow of interaction among these players, can play that role. We can broadly define cooperation frameworks into two; one between the central and the local governments and another among private-sector groups, such as companies, associations and groups. These players in the framework have differing, sometimes, conflicting views regarding the digital contents industry whether the digital contents should aim for skilled applicability or the abstract or whether the emphasis should rest on public interest or profitability. Immature competition and lack of trust among these players also give rise to such inefficiencies as overlap in investments, inexpertness and inefficient use of resources. We have proposed and realized the National Integrated Cooperation System to bridge these gaps among the major players in the industry. The National Integrated Cooperation System rests on the following major functions. The first major function of the NICS is to decipher any ambiguity that may be embedded in external Inputs by stratified role and bias. The second function is to create cooperative groups that will deal with the ambiguities based on its consequent situation. The third is a feedback function that will draw out a new cooperative way by re-feeding the capacities and the conflicts that stem from the existing organizations and strategies into cooperation and adjustment process. Our NICS has compared and evaluated with England and Australia digital content industry models under AHP(Analytic Hierarchy Process) method. NICS has turned out to be well designed and have strong points based on OECD innovation and cooperation criteria.