• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.129-138
• /
• 2006

Using a strain-controlled rheometer, the steady shear flow properties of aqueous xanthan gum solutions of different concentrations were measured over a wide range of shear rates. In this article, both the shear rate and concentration dependencies of steady shear flow behavior are reported from the experimentally obtained data. The viscous behavior is quantitatively discussed using a well-known power law type flow equation with a special emphasis on its importance in industrial processing and actual usage. In addition, several inelastic-viscoplastic flow models including a yield stress parameter are employed to make a quantitative evaluation of the steady shear flow behavior, and then the applicability of these models is also examined in detail. Finally, the elastic nature is explained with a brief comment on its practical significance. Main results obtained from this study can be summarized as follows: (1) Concentrated xanthan gum solutions exhibit a finite magnitude of yield stress. This may come from the fact that a large number of hydrogen bonds in the helix structure result in a stable configuration that can show a resistance to flow. (2) Concentrated xanthan gum solutions show a marked non-Newtonian shear-thinning behavior which is well described by a power law flow equation and may be interpreted in terms of the conformational status of the polymer molecules under the influence of shear flow. This rheological feature enhances sensory qualities in food, pharmaceutical, and cosmetic products and guarantees a high degree of mix ability, pumpability, and pourability during their processing and/or actual use. (3) The Herschel-Bulkley, Mizrahi-Berk, and Heinz-Casson models are all applicable and have equivalent ability to describe the steady shear flow behavior of concentrated xanthan gum solutions, whereas both the Bingham and Casson models do not give a good applicability. (4) Concentrated xanthan gum solutions exhibit a quite important elastic flow behavior which acts as a significant factor for many industrial applications such as food, pharmaceutical, and cosmetic manufacturing processes.

• Journal of the Korean Society of Visualization
• /
• v.5 no.1
• /
• pp.22-29
• /
• 2007

In the present study, naturally generated bubbles were investigated to be sure if they could be adopted as the tracer for PIV techniques. The bubble can be grown from the nuclei melted in the water of tunnel and the size of bubbles is changed through the variation of tunnel pressure. Since the trace ability and appropriate size of tracer are so important for PIV techniques, the characteristics of bubbles as tracer are revealed in terms of trace ability and bubble size with the variation of flow speed and tunnel pressure in this study. In addition, PIV measurements of (low behind a rotating propeller are conducted to confirm the trace ability of bubbles even in a highly vortical flow.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.381-383
• /
• 2002

This paper proposes a MATLAB program for solving security-constrained optimal power flow using linear programming. Security-constrained optimal power flow can find an optimal generation satisfying bus voltage limits, line flow limits, reactive generation limits, even if contingency occurs. Sensitivity matrixes are obtained based on power flow solutions with and without single line contingency. This program is tested for an IEEE 14bus system with 5 generators Results shows good ability of finding optimal solution in case of a single line contingency.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.4
• /
• pp.437-445
• /
• 2011

Purpose : The purpose of this study was to analysis on diaphragm thickness and lung function of stroke patients by walking ability. Methods : We recruited thirty-five adults after stroke(20 male, 15 female) for our study. The subjects were divided into two groups; independent walking group(11 male, 9 female) and non-independent walking group(9 male, 6 female). Assessment of diaphragm thickness was performed using ultrasound in B-mode with a 7.5 MHz linea probe. During the experiment, the subject was seated in the chair. All subjects performed maximal expiratory flow maneuvers using a spirometer in order to determine the forced expiratory volume in 1 second ($FEV_1$), forced vital capacity(FVC), peak expiratory flow(PEF) and $FEV_1$/FVC. Chest expansion was measured with a tape-measure placed circumferentially around the chest wall at the xiphoid process. The collected data analyzed by independent t-test. Results : The diaphragm thickness were significant differences between the independent walking and nonindependent walking group. Values of forced vital capacity, forced expiratory volume at one second, peak expiratory flow in pulmonary function tests were significant differences between the independent walking and non-independent walking group. However, chest expansion were not significant differences in both of the group. Conclusion : This study showed that walking ability of stroke patients have influenced on diaphragm thickness and pulmonary function.

• Journal of dental hygiene science
• /
• v.23 no.4
• /
• pp.271-281
• /
• 2023

Background: This study aims to improve dental hygiene education by investigating the relationship between metacognition, learning flow, and problem-solving abilities in dental hygiene majors. Methods: A survey was conducted on 2nd to 4th-year students from dental hygiene programs, with 132 responses analyzed. Data analysis involved t-tests and ANOVA to examine the differences in metacognition, learning flow, and problem-solving abilities based on the general characteristics. Multiple regression analysis was employed to investigate the factors influencing the dependent variable, which is problem-solving abilities. The collected data were analyzed using SPSS. Results: First, when comparing metacognition, learning flow, and problem-solving abilities based on the general characteristics of the study participants, statistically significant differences were observed in common factors such as major satisfaction, subjective academic performance, GPA (grade point average), and reason for major choice (p<0.05). Second, it was found that there is a significant positive correlation between metacognition, learning flow, and problem-solving abilities in dental hygiene students (r≥0.79, p<0.05). In other words, higher levels of metacognition and learning flow were associated with better problem-solving abilities. Third, factors influencing problem-solving abilities were identified, with both metacognition and learning flow having a statistically significant positive impact. It was also noted that metacognition had a greater influence on problem-solving abilities compared to learning flow (adjusted R²=0.815, p<0.05). Conclusion: To enhance the core competency of problem-solving abilities, it is essential to improve metacognition and learning flow. To enhance metacognition and promote learning flow, strategies such as goal setting, utilizing effective learning methods, boosting self-efficacy, managing the learning environment, choosing activities that foster immersion, stress management, self-assessment and feedback integration, improving focus, and utilization a variety of learning experiences will be necessary.

• Journal of The Korean Association of Information Education
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2011

The programming education in K-12 field is processing with conceptual approaches to obtain basic grammar not including higher knowledge processing. This is main reason that can't able to obtain the educational effects. This study aims to research the innovated methodology of programming education which can have educational effect by participating of learners with positive interest, and recognize the effect of the Scratch programming education on elementary school student's learning-flow and programming ability. As a result Scratch programming education has effect on elementary school student's improving the level of learning-flow and the programming ability.

• Restorative Dentistry and Endodontics
• /
• v.29 no.4
• /
• pp.365-369
• /
• 2004

The purpose of this study was to evaluate the apical sealing ability of Super-EBA, MTA and Dyract-flow as retrofilling materials. Forty-eight extracted human teeth with straight and single root canal were used in this study. The root canals were prepared to a #40 apical canal size and obturated with gutter-percha. Apicoectomies were performed and root end cavities were prepared to a depth of 3mm using an ultrasonic device. The root end cavities were filled with Super-EBA, MTA or Dyract-flow. Leakage was measured using an electrochemical technique for 4 weeks. According to this study, the results were as follows. 1. Increasing leakage with time was observed in all groups. 2. No significant difference was noted among the 3 groups with time (p =0.216). 3. No significant difference was noted among the 3 groups when measured within the same time interval (p =0.814). The results of this study suggest that the sealing ability of Dyract-flow is equal to that of Super-EBA and MTA, and Dyract-flow may be an alternative to other materials for root-end filling.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.10a
• /
• pp.91-97
• /
• 2001

The thin-layer Navier-Stokes equations are solved for the hypersonic flow over blunt cone configurations with applications to laminar as well as turbulent flows. The equations are expressed in the forms of flux-vector splitting and explicit algorithm. The upwind schemes of Steger-Warming and van Leer are investigated in their ability to accurately predict the heating loads along the surface of the body. A comparison with the second order extensions of these schemes is made and a hybrid scheme incorporating a combination of central differencing and flux-vector-splitting is presented. This scheme is also investigated in its ability to accurately predict heat transfer distributions.

• The KIPS Transactions:PartD
• /
• v.13D no.1 s.104
• /
• pp.117-124
• /
• 2006

Hardware and software codesign framework called PeaCE(Ptolemy extension as a Codesign Environment) was developed. It allows to express both data flow and control flow which is described as fFSM which extends traditional finite state machine. While the fFSM model provides lots of syntactic constructs for describing control flow, it has a lack of their formality and then difficulties in verifying the specification. In order to define the formal semantics of the fFSM, in this paper, firstly the hierarchical structure in the model is flattened and then the step semantics is defined. As a result, some important bugs such as race condition, ambiguous transition, and circulartransition can be formally detected in the model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2214-2221
• /
• 2011

The purpose of this study was to examine the relationship of goal orientation, flow experience and self-accomplishment among students who received lifeguard education. The findings of the study were as follows: First, the task-involvement of the college students receiving lifeguard education, which was one of the sub-variables of goal orientation, had an impact on cognitive flow and behavioral flow, and ego-involvement affected cognitive flow. Second, the task-involvement of the college students receiving lifeguard education, which was one of the sub-variables of goal orientation, exercised an influence on their self-realization, display of ability and development of ability, which were the task-involvement of self-accomplishment. Besides, ego-involvement impacted on self-realization. Third, the cognitive flow and behavioral flow of the college students receiving lifeguard education, which were the sub-variables of flow experience, exerted an influence on self-realization, display of ability and development of display, which were the sub-variables of self-accomplishment. Fourth, the goal orientation of the college students receiving lifeguard education had a firsthand relationship to flow experience and self-accomplishment, and that had a secondhand causal relationship to self-accomplishment through flow experience as well.