• Korean Journal of Veterinary Research
• /
• v.37 no.1
• /
• pp.213-220
• /
• 1997

A simple and rapid method known as matrix solid phase dispersion(MSPD) for simultaneous determination of 11 pesticide(2,4,5,6-tetrachlor m-xylene, ${\alpha}$-BHC, ${\gamma}$-BHC, ${\delta}$-BHC, aldrin, chlorfulazuron, heptachloroepoxide, dieldrine, endrin, endosulfan sulfate, and tetradifon) in beef fat was estabilished. Beef fat(0.5g) was fortified by adding the 11 pesticides and dibutylchlorendate as internal standard, and blended with 2g bulk $C_{18}$ in pestle and motar. Pesticides were eluted from an extraction column composed of $C_{18}$/ fat matrix blend and 2g activated Florisil by addition of 8ml acetonitrile. Then $2{\mu}l$ portion of the acetonitrile elute was directly analyzed by gaschromatography with electron capture detection. Unfortified blank control were treated similarly. Recovery rate were ranged from $83{\pm}5.4%$ to $94.2{\pm}7.6%$, intra-assay variability and inter-assay variability were ranged from 2.3% to 7.4%(n=5 for each insecticides) and from $6{\pm}1%$ to $12{\pm}3%$(n=10 for each insecticides), respectively. These results indicated that the MSPD methodology is aceptable for the extraction, determination and screening of residues 11 chroniated pesticides in beef fat.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.150-153
• /
• 2007

Hydrocarbons have been successfully used as a chemical marker in order to identify irradiated from non-irradiated foods. The method for determining hydrocarbons consists of extraction of fats, followed by separation of hydrocarbons by florisil column chromatography, and then identification of hydrocarbons by GC/MS. Currently, solvent extraction method for fats has certain limitations with regard to extraction time and solvent consumption. Commercial hams and sausage were irradiated at 0 and 5 kGy, and the efficiency of microwave-assisted extraction (MAE) and conventional solvent extraction (CSE) methods on the extraction of radiation-induced hydrocarbons from the meat products was compared. Significant levels of hydrocarbons, mainly composed of 1,7-hexadecadien, 1,7,10-hexadecatriene, and 6,9-heptadecadiene, were detected in the extracts from irradiated hams and sausages by both CSE and MAE methods. Both methods were acceptable in extracting hydrocarbons from samples, but MAE method required apparently reduced amounts of solvent from 150 (CSE) to 50 mL and reduced extraction time from 23 (CSE) to 5 min.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.4
• /
• pp.251-257
• /
• 2004

Analytical methods were developed to determine cyclosulfamuron residues in soil, water, rice grain and straw using high-performance liquid chromatography (HPLC) with ultraviolet absorption detection. In these methods, cyclosulfamuron was extracted with aqueous $Na_2HPO_4$/acetone and acetone/methanol mixture from soil and rice samples respectively. Liquid-liquid partition coupled with ion-associated technique, Florisil column chromatography, and solid-phase extraction (SPE) were used to separate cyclosulfamuron from interfering co-extractives prior to HPLC analysis. For water sample, the residue was enriched in $C_{18}$-SPE cartridge, cleaned up in situ, and directly subjected to HPLC. Reverse-phase HPLC under ion-suppression was successfully applied to determine cyclo-sulfamuron in sample extracts with the detection at its ${\lambda}_{max}$ (254 nm). Recoveries from fortified samples averaged $87.8{\pm}7.1%$ (n=12), $97.3{\pm}7.2%$ (n=12), $90.8{\pm}6.6%$ (n=6), and $78.5{\pm}6.7%$ (n=6) for soil, water, rice grain and straw, respectively. Detection limits of the methods were 0.004 mg/kg, 0.001 mg/L, 0.01 mg/kg and 0.02 mg/kg for soil, water, rice grain and straw samples, respectively.

• Preventive Nutrition and Food Science
• /
• v.9 no.3
• /
• pp.222-226
• /
• 2004

Hydrocarbons induced by gamma-irradiation of green, black, and oolong teas were analyzed to determine whether the hydrocarbons can be used as markers for detecting post-irradiation of these teas. The samples were irradiated at 0, 2.5, 5, 7.5, and 10 kGy. Detection was attempted by extracting fat from the teas, separation of hydrocarbons with florisil column chromatography, and identification of hydrocarbons by gas chromatography-mass spectroscopy (GC-MS). Concentration of hydrocarbons increased with the irradiation dose. The major hydrocarbons in irradiated green, black, and oolong teas were 1-tetradecence (14:1), pentadecane (15:0), 1,7-hexadecadiene (16:2), 1-hexadecene (16:1), 8-heptadecene (17:1), and heptadecane (17:0). Radiation-induced hydrocarbons in teas were 1,7-hexadecadiene and 8-heptadecene. These compounds were not detected in non-irradiated samples, so the hydrocarbons (16:2, 17:1) can be used as markers for detecting post-irradiation of the teas. Furthermore, detection of hydrocarbons after 12 months storage at room temperature remains a suitable method for identifying irradiated teas.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.2
• /
• pp.165-175
• /
• 2010

A gas chromatographic (GC) method was developed to determine residues of captan, folpet, captafol, and chlorothalonil, known as broad-spectrum protective fungicides for the official purpose. All the fungicide residues were extracted with acetone containing 3% phosphoric acid from representative samples of five agricultural products which comprised rice, soybean, apple, pepper, and cabbage. The extract was diluted with saline, and dichloromethane partition was followed to recover the fungicides from the aqueous phase. Florisil column chromatography was additionally employed for final cleanup of the extracts. The analytes were then determined by gas chromatography using a DB-1 capillary column with electron capture detection. Reproducibility in quantitation was largely enhanced by minimization of adsorption or thermal degradation of analytes during GLC analysis. Mean recoveries generated from each crop sample fortified at two levels in triplicate ranged from 89.0~113.7%. Relative standard deviations (RSD) were all less than 10%, irrespective sample types and fortification levels. As no interference was found in any samples, limit of quantitation (LOQ) was estimated to be 0.008 mg/kg for the analytes except showing higher sensitivity of 0.002 mg/kg for chlorothalonil. GC/Mass spectrometric method using selected-ion monitoring technique was also provided to confirm the suspected residues. The proposed method was reproducible and sensitive enough to determine the residues of captan, folpet, captafol, and chlorothalonil in agricultural commodities for routine analysis.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.3
• /
• pp.237-245
• /
• 2016

Background: Cyanazine is used as a pre-emergent herbicide once during the growing season to control weeds of many upland crops worldwide. This study aimed to establish a method to determined cyanazine residue levels in major medicinal crops by using high performance liquid chromatography-UV detection/mass spectometry (HPLC-UVD/MS). Methods and Results: Cyanazine residue was extracted with acetone from the raw products of four representative medicinal plants - Scutellaria baicalensis, Paeonia lactiflora, Platycodon grandiflorum and Angelica gigas. The extract was diluted with a large volume of saline water and directly partitioned into dichloromethane to remove polar co-extractives in the aqueous phase. It was then purifined using optimized Florisil column chromatography. HPLC analysis conducted using an octadecylsilyl column allowed the successful separation of cyanazine from co-extractives of the samples, and the amount was sensitively quantified by ultraviolet absorption at 225 nm with no interference. The accuracy and precision of the proposed method were validated by conducting recovery experiments on each medicinal crop sample fortified with cyanazine at two concentration levels per crop in triplicate. Conclusions: The mean recoveries ranged from 91.2% to 105.3% for the four representative medicinal crops. The coefficients of variation were less than 10%, irrespective of the sample types and fortification levels. The limit of quantification of cyanazine was 0.02 mg/kg as verified by the recovery experiment. A confirmatory method was performed by liquid chromatography/MS using selected-ion monitoring technique to clearly identify the suspected residue.

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.223-231
• /
• 2009

This study was performed to develop a precise single residue analytical method of fungicide fenhexamid in representative crops for general residue analytical method which could be applied to most of crops. Korean cabbage, mandarin, apple and green pepper were selected, macerated, extracted with acetone, concentrated and partitioned with dichloromethane. Then the extracts were concentrated and cleaned-up through Florisil column with ethyl acetate/0.1% acetic acid in hexane [15:85, (v/v)] before concentration and analysis with HPLC. LOQ (Limit of Quantitation) of fenhexamid was 1 ng (S/N>10) and MQL (Method Quantitative Limit) was 0.01 mg/kg. Recoveries were measured at two fortification levels (10 MQL and 50 MQL) on crop samples and ranged from 85.2% to 94.8% (mean recoveries) and coefficients of variation were <10% regardless of sample type.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.2
• /
• pp.90-95
• /
• 2002

A study was carried out to optimize the cleanup step using a solid-phase extraction (SPE) cartridge, $SupelClean^{TM}$ Florisil, for multiresidue analysis of 16 pesticides in cucumber matrix. Eluting efficiencies of two solvent systems including acetone/n-hexane and ethyl acetate/n-hexane mixtures were critically evaluated by recoveries of target anaytes from the SPE Florisil column. Based on the recovery as a measure of eluting efficiency, an acetone/n-hexane (20/80,v/v) mixture provided more than 80% recovery for 15 pesticides except bifenthrin. In case of ethyl acetate/n-hexane, 14 pesticides showed recoveries higher than 75% while those far alachlor and bifenthrin were less than 30%.

• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.157-161
• /
• 2009

This paper proposes an analytical method for determining amounts of polycyclic aromatic hydrocarbons (PAHs; benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, benzo[g,h,i] perylene) in coffees beans. Soxhlet extraction and liquid/liquid extraction were tested for the quantification of seven PAHs. Soxhlet extraction was followed by cyclohexane extraction and used a silica cartridge. Liquid/liquid extraction was followed by n-hexane extraction and utilized a florisil cartridge. The extracts were analyzed by HPLC-fluorescence detection (FLD) with a Supelcosil LC-PAH column. The PAH recoveries ranged from 78.68 to 96.28% for the liquid/liquid extraction, and from 67.47 to 84.60% for the Soxhlet extraction.

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.141-147
• /
• 2014

Fenpyroximate is acaricide of pyrazole group. This acaricide have already been permitted for herb cultivation. This experiment was conducted to establish a determination method for fenpyroximate residue in herbal medicines using HPLC-PDA and HPLC-MS/MS. Fenpyroximate residue was extracted with acetone from samples of herbal which Liquorice Root (Glycyrrhiza uralensis) and Safflower Seed (Carthamus tinctorius Linne). The extract was diluted with saturated saline water and dichloromethane liquid-liquid partition (extraction) was followed to recover fenpyroximate from the aqueous phase. Amino propyl ($NH_2$) and florisil column chromatography was additionally employed for final clean up of the extract. The fenpyroximate was quantitated by HPLC-PDA and HPLC-MS/MS. The herbals were fortified with fenpyroximate at 2 or 3 levels per crop. Mean recovery ratio were ranged from 72.0 to 106.4%. The coefficients of variation were ranged from 0.2 to 4.4. Therefore, this analytical method was reproducible and sensitive enough to determine the residue of fenpyroximate in herbal medicines.