• 한국항공우주학회지
• /
• 제33권2호
• /
• pp.113-118
• /
• 2005

본 논문은 한쪽 또는 양쪽의 측정 점들이 종래의 차동증폭기에서 허용되는 전압 범위를 초과할 때 차동전압 측정을 위한 인공위성 배터리 셀 전압 감시 시스템을 제시하였다. 본 시스템은 다수개의 직렬로 연결된 셀들로 구성된 재충전 가능한 인공위성 배터리에서 몇몇의 셀 전압들이 높은 공통모드 전압에서 측정될 때 각 셀 전압 감시를 위해 특히 유용하다.

• 센서학회지
• /
• 제27권1호
• /
• pp.59-63
• /
• 2018

Among Internet of things (IoT) applications, the most demanding requirements for the widespread realization of many IoT visions are security and low power. In terms of security, IoT applications include tasks that are rarely addressed before such as secure computation, trusted sensing, and communication, privacy, and so on. These tasks ask for new and better techniques for the protection of data, software, and hardware. An integral part of hardware cryptographic primitives are secret keys and unique IDs. Physical Unclonable Functions(PUF) are a unique class of circuits that leverage the inherent variations in manufacturing process to create unique, unclonable IDs and secret keys. In this paper, we propose a low power Arbiter PUF circuit with low error rate and high reliability compared with conventional arbiter PUFs. The proposed PUF utilizes a power gating structure to save the power consumption in sleep mode, and uses a razor flip-flop to increase reliability. PUF has been designed and implemented using a FPGA and a ASIC chip (a 0.35 um technology). Experimental results show that our proposed PUF solves the metastability problem and reduce the power consumption of PUF compared to the conventional Arbiter PUF. It is expected that the proposed PUF can be used in systems required low power consumption and high reliability such as low power encryption processors and low power biomedical systems.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권2호
• /
• pp.124-130
• /
• 2005

In this paper, low-power design and implementation techniques for DWT(Discrete Wavelet Transform) of the JPEG2000 compression are proposed. In DWT block of the JPEG2000, linear phase 9 tap and 7 tap filters are used. For low-power implementation of those filters, processor technique for DA(Distributed Arithmetic) filter and minimization technique for number of addition in CSD(Canonic Signed Digit) filter are utilized. Proposed filter structure consists of 3 blocks. In the first CSD coefficient block, every possible 4 bit CSD coefficients are calculated and stored. In second processor block, multiplication is done by MUX and addition processor in terms of the binary values of filter coefficient. Finally, in third block, multiplied values are output and stored in flip-flop train. For comparison of the implementation area and power dissipation, proposed and conventional structures are implemented by using Verilog-HDL coding. In simulation, it is shown that 53.1% of the implementation area can be reduced comparison with those of the conventional structure.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.77-81
• /
• 2004

In this paper, we propose a analog front-end (AFE) for noncoherent On-Off Keying (OOK) Ultra Wide Band (UWB) system based on power detection. The proposed AFE are designed using 0.18 micron CMOS technology and verified by simulation using SPICE. The proposed AFE consist of Sample-and-Hold block, Analog-to-Digital converter, synchronizer, delayed clock generator and impulse generator. The time resolution of 1ns is obtained with 100MHz system clocks and the synchronized 10-bit digital outputs are delivered to the baseband. The impulse generator produces 1ns width pulse using digital CMOS gates. The simulation results show the feasibility of the proposed UWB AFE systems.

• 대한전자공학회논문지
• /
• 제26권4호
• /
• pp.81-87
• /
• 1989

본 논문에서는 유한체 GF($2^m$) 상에서 두 원소들의 승산을 실현하는 셀배열승산기를 제시한다. 이 승산기는 승산연산부, mod연산부, 원시기약 다항식연산부로 구성한다. 승산연산부는 AND와 XOR게이트로 설계한 기본셀의 배열을 이루며, mod연산부 역시 AND와 XOR게이트에 의한 기본셀을 배열하여 구성하였다. 원시 기약다항식 연산부는 XOR게이트들, D플립플롭 회로들과 한개의, NOT게이트를 사용하여 구성하였다. 본 논문에서 제시한 승산기는 회선경로선택의 규칙성, 간단성, 배열의 모듈성과 병발성의 특징을 가지며 특히 차수 m이 증가하는 유한체의 두 원소들의 승산에서 확장성을 가지므로 VLSI 실현에 적합하다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권2호
• /
• pp.104-110
• /
• 2011

A CMOS Image Sensor (CIS) mounted on mobile appliances requires low power consumption due to limitations of the battery life cycle. In order to reduce the power consumption of CIS, we propose novel power reduction techniques such as a data flip-flop circuit with leakage current elimination and a low power single slope analog-to-digital (A/D) converter with a sleep-mode comparator. Based on 0.13 ${\mu}m$ CMOS process, the chip satisfies QVGA resolution (320 ${\times}$ 240 pixels) that the cell pitch is 2.25 um and the structure is a 4-Tr active pixel sensor. From the experimental results, the performance of the CIS has a 10-b resolution, the operating speed of the CIS is 16 frame/s, and the power dissipation is 25 mW at a 3.3 V(analog)/1.8 V(digital) power supply. When we compare the proposed CIS with conventional ones, the power consumption was reduced by approximately 22% in the sleep mode, and 20% in the active mode.

• 한국통신학회논문지
• /
• 제14권3호
• /
• pp.235-239
• /
• 1989

유한체 GF($2^m$)상에서 임의의 두 원소를 곱하는 승산기를 제시하였으며 동작과정을 단계별로 설명하였다. 본 논문에서 제시된 회로는 기준의 선형궤한 치환 레지스터를 이용한 회로가 변형된 형태로서 m단 궤환치환 레지스터, m-1개의 플립플롭, m개의 AND게이트, 그리고 m-입력 XOR 게이트로 구성되며 회로가 간단하다. GF($2^m$)의 두 원소를 곱할 때, 기존의 치환 레시스터 승산기는 m번 치환하면 곱셈의 결과가 레지스터에 축적되므로 m클럭시간 만큼 지연되는 반면 제안된 승산기는 입력되고부터 직렬출력을 얻을 때까지 m-1 클럭시간이 소요되며 cellular-array 승산기에 비해 매우 간단하고 systolic 승산기에 비해서는 지연시간도 단축된다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.159-165
• /
• 2005

The proposed optical transmitter is composed of FF(flip flop) , PLL (phase locked loop), reference clock generator, serializer and LD driver 10x250 Mb/s data arrays are translated to the 2.5 Gb/s data signal by serializer. In this case, 1 data bus is allocated usually as a reference clock for synchronization. In this proposed optical transmitter, 125 MHz reference clock is generated from 10x250 Mb/s data arrays by reference clock generator. From this method. absent of reference clock bus is available and more data transmission become possible. To achieve high speed operation, the serializer circuit is designed as two stacks. For 10:1 serialization, 10 clocks that have 1/10 lambda differences is essential, so the VCO (voltage controlled oscillator) composed of 10 delay buffers is designed. PLL is for runing at 250 MHz, and dual PFD(phase frequency detector) is adopted for fast locking time. The optical transmitter is designed by using 0.35 um CMOS technology.

• 한국정보통신학회논문지
• /
• 제24권7호
• /
• pp.885-890
• /
• 2020

거리측정 시스템에서 사용되는 시간-디지털 변환회로는 시작신호와 멈춤신호 사이의 시간 간격을 이용하여 거리를 측정한다. 응답속도를 고려한 시간 간격은 일반적으로 카운터 회로를 이용하여 디지털 정보로 변환한다. 그러므로 정밀도 향상을 위해서는 높은 주파수의 클록 신호가 요구되며, 미세 거리의 측정을 위해서도 높은 주파수의 클록 신호가 필요하다. 본 논문에서는 동일한 주파수를 사용하면서도 거리 측정의 정밀도를 높이기 위한 카운터 회로를 설계하였다. 회로의 설계는 0.18㎛ CMOS 공정을 이용하였으며, 설계된 회로의 동작은 HSPICE 시뮬레이션을 통하여 확인하였다. 시뮬레이션 결과 일반적인 카운터 회로를 사용한 경우에 비해 4배의 향상된 정밀도를 얻을 수 있었다.

• Journal of information and communication convergence engineering
• /
• 제20권2호
• /
• pp.137-142
• /
• 2022

Monolithic three-dimensional (M3D) logics such as M3D-NAND, M3D-NOR, M3D-buffer, M3D 2×1 multiplexer, and M3D D flip-flop, consisting of modularized M3D inverters (M3D-INVs), have been proposed. In the previous M3D logic, each M3D logic had to be designed separately for a standard cell library. The proposed M3D logic is designed by placing modularized M3D-INVs and connecting interconnects such as metal lines or monolithic inter-tier-vias between M3D-INVs. The electrical characteristics of the previous and proposed M3D logics were simulated using the technology computer-aided design and Simulation Program with Integrated Circuit Emphasis with the extracted parameters of the previously developed LETI-UTSOI MOSFET model for n- and p-type MOSFETs and the extracted external capacitances. The area, propagation delay, falling/rising times, and dynamic power consumption of the proposed M3D logic are lower than those of previous versions. Despite the larger space and lower performance of the proposed M3D logic in comparison to the previous versions, it can be easily designed with a single modularized M3D-INV and without having to design all layouts of the logic gates separately.