최근 목재이용에 대한 소비자의 요구가 다양화 되면서 목조 주택뿐만 아니라 공공건물 및 놀이시설 등에 고내구성 집성재에 대한 시장수요가 증가할 것으로 예상된다. 본 연구는 국산 낙엽송으로 제조한 구조용 집성재에 적합한 난연처리 기술개발 및 기준을 정립하기 위한 목적으로 수행되었다. 난연처리된 국산 낙엽송 제재목을 이용하여 구조용 집성재를 제조하고 제조 후 집성재에 미치는 영향을 조사하였다. 낙엽송 난연처리재의 경우 구조용 집성재의 강도조건에는 만족하였으나 난연제 처리에 의한 강도적인 감소와 박리 발생 등은 개선될 필요가 있었다. 집성재의 제조 후 주입식 난연처리 혹은 도포식 난연처리 기술 개발이 요구되었다.
Flame retardancy and mechanical properties of polyolefinic mixed waste plastics/filler composites were investigated by using inorganic flame retardant(magnesium hydroxide) and PUB(polyurethane block) powder generated from cryogenic insulation process. All composites were obtained by extrusion and after compression molding. The effect of PUB powder on the properties of the composites was studied by tensile and izod impact test, morphology studies and flammability as LOI and UL94 vertical burning test and smoke density. The objective of this work is to obtain good mechanical properties from recycled PP composites with $Mg(OH)_{2}/PUB$ powder as fillers and optimum cost-performance balance, in addition to flame retardant characteristics.
최근 목조문화재를 화재로부터 미연에 방지하기 위한 방법 중 방호대상물인 목재 표면에 직접 적용하는 방염 처리가 있으며, 이는 화재를 사전에 차단하지 못했을 경우 재료에 대한 불꽃의 저항능력을 확보하여 연소를 지연시킴으로서 화재를 예방하고 또한 재실자의 피난시간을 확보하는 것으로서 생명 및 재산을 보호함으로써 소방기본법의 목적과 그 뜻을 같이 한다고 할 수 있다. 하지만 현재 방염제를 목조문화재의 단청면에 분사하여 사용할 경우 일정시간이 지나면 단청의 퇴색, 백화현상, 수분흡수 등의 문제가 지속적으로 발생하고 있으며, 이에 따른 문화재 손실 위험성 또한 증가하고 있다. 따라서 현행 목조문화재를 방염처리 할 경우 현장 시공 시 시간 경과 후에도 단청과 목재에 문제발생이 없어야 하며, 지속가능한 방염효과 기술의 확보가 선결되어야 한다. 이에 본 연구에서 최근 주로 사용되고 있는 방염제 종류에 따른 목재의 방염성능의 평가분석을 통하여 방염제를 단청표면에 분사하여 일정시간이 경과한 후에도 단청과 목재에 문제발생이 없으며, 방염효과가 지속가능한지에 대한 정밀분석으로 방염처리 품질 및 성능을 확인하여 목조문화재에 적합한 방염처리방법 선정에 대한 기초적 자료를 제공하고자 한다.
본 논문은 유-무기 하이브리드 방염제의 성능특성에 관한 연구로써 건축물의 실내장식물로 많이 사용되고 있는 MDF 합판을 이용하여 유-무기 하이브리드 방염제 처리 유 무에 따른 실험시료를 제작하였다. 그 후 $45^{\circ}$ 연소시험기를 이용한 방염성능 측정실험과 콘칼로미터를 이용한 연소특성 측정실험을 진행을 진행하여 유-무기 하이브리드 방염제의 성능특성을 확인하였다. 실험결과 유-무기 하이브리드 방염제의 경우 무기물 및 유기물의 장점 모두 가지고 있어 내열성 및 내구성, 부착성이 크게 향상되는 것을 확인할 수 있었다. 또한, 연소가스 발생량의 저감효과와 연기발생의 감연효과 등 방염성능이 우수하게 나타났다.
A commercial cyclic diphosphonate ester (TPMP) and melamine (MA) was combined and added to polyamide 6 (PA6) to prepare the fire retardant PA6. An increase of the oxygen index to 28.6 as well as an improvement of the UL-94 classification to V-0 rating was observed. Cone measurements explained the rate of heat release (RHR) decreased and TGA showed the early decomposition and high solid residue due to co-addition of TPMP and MA, suggesting the occurrence of synergistic effect of TPMP and MA on fire resistance of PA6. The morphology of the char developed during combust ion showed the appearance of thick, intumescent cells on the surface of retardant PA6, which protects the underlying material from the action of the heat flux or flame and limits the diffusion of combustible volatile products towards the flame and oxygen.
본 연구는 목재에 난연성능을 부여하기 위한 난연제 조성물을 제조하고 그 난연제를 처리한 목재의 난연성능을 평가함에 있다. 난연제 조성물은 단독 혹은 혼합하여 소나무에 처리한 후 열분해 특성을 분석하였다. 처리된 시료의 연소특성 분석에는 TGA와 콘칼로리미터를 사용하였다. 시험결과, 단독약제에 의한 TGA의 열적 거동은 목재에 처리 시 Char의 형성 및 연소 지연 등으로 표현되어 나타났으며 이러한 연소특성은 이후 약제의 혼합에 의한 조성물의 난연성능의 발현에 영향을 미쳤다. 혼합약제의 목재 처리 후 콘칼로리미터에 의한 열특성 분석에서는 처리농도 및 처리량에 따라서 열방출률 및 총열방출량에 영향이 있었다. 난연제 조성물 중 FR1, FR2는 건축법 난연 3급을 만족하였다.
The object of this study is to obtain the optimum mix proportion of halogen free compound with flame resistance and, for the purpose, thermal/electrical characteristics test are conducted using compatibilizing agents, flame resistance agents, hydroxide aluminum, sunscreen, antioxidant and silicon oil on the base resin of linear low density polyethylene (LLDPE), Ethylene vinyl acetate copolymer (EVA). Existing compound method accompanies many requirements to be satisfied including a lot of addition of flame resistance agents, prohibition of impact on mixing capability with base and property and etc. In this study, different from the existing method, the optimum mix proportion is determined and experimented by adding nano clay. Oxygen index test shows no difference between specimens while T-6, T-9 shows oxygen index of 29[%] and 26[%], respectively. This is concluded that hydroxide aluminum, which is a flame resistance agent, leads low oxygen index. From UL94-V vertical flame resistance test, the combustion behavior is determined as V-0, Fail based on UL94-V decision criteria. Viscometry shows low measurements in specimens with separate addition of compatibilizing agents or nano clay. Volume resistivity test shows low measurement mainly in specimens without compatibilizing agents. Therefore, with the flame resistance compound shows better performance for thermal/electrical property and the optimum mix proportion are achieved among many existing materials.
복합재료는 단일물질이 갖는 각각의 특성을 복합화 함으로써 우수한 물성을 갖도록 구성한 물질로 금속 및 고분자의 성능을 뛰어넘는 재료로써 각광받고 있다. 다만, 생산시간이 길고, 단가가 비싼 단점이 있어 이를 극복하기 위해 많은 연구가 진행되고 있다. 본 연구에서는 복합재료의 대량생산 시 시간을 단축할 수 있는 에폭시 수지 경화제를 개발하였고, 난연성을 부여하여 이의 적용성을 확대하고자 하였다. 기본 물질로 사용한 에폭시 수지는 bisphenol F 및 resorcinol 구조의 에폭시 2종을 사용하였으며, 난연성을 부여하기 위하여 9,10-dihydro-9-oxa-10-phosphaphenantrene-10-oxide(DOPO)를 이용하여 변성하였다. 첨가제로는 triethylphosphate (TEP) 및 bis[(5-ethyl-2-methyl-1,3,2-dioxaphosphorinan-5-yl)methyl] methyl phosphonate P,P'-dioxide (FR-001)을 사용하여 7종의 조성물을 배합하였고, 열적 특성(겔화시간, 유리전이온도), 난연 성능을 평가하여 high pressure resin transfer molding (HP-RTM) 공법에 적용 가능한 에폭시 기지재를 개발하였다.
경질 폴리우레탄(Polyurethane) 폼(Foam)의 난연 성능을 개선하기 위하여 외부에 물유리를 코팅하였다. 무기질인 물유리 코팅층이 적용된 우레탄폼의 콘칼로리메터의 열방출율(Heat release rate)은 급격히 감소하였다. 폴리우레탄 표면에 코팅된 물유리는 화염에 노출되었거나 가열되었을 때 유리화 반응과 미 탈출 수분에 의한 발포현상으로 인해 유리질 폼을 형성하게 된다. 폴리우레탄 폼 위에 형성된 유리질 폼은 단열층이 되어 10 min 이상 폴리우레탄 폼의 연소를 억제하였다. 이러한 결과에 따라서 물유리는 경질 폴리우레탄 폼의 난연 특성을 개선할 수 있음을 확인하였다.
본질적인 난연 및 내열성의 PQXS, PIQS, PQS 3종류의 폴리머를 2,3-dichloroquinoxaline, 1,3-dichloroisoquinoline, 4,7-dichloroquinoline을 각각 출발 물질로 하여 합성하였다. 이들을 FT-IR, UV/Vis 분광분석, DTA, 원소분석 등에 따라 특성분석을 행하였다. 이들 폴리머소재는 내열 및 난연특성 시험에서 녹는점 기준 $350^{\circ}C$ 이상의 높은 내열성과 LOI값 기준으로 41~42의 높은 수치의 난연특성을 나타내었으며 또한 수직연소시험에서 UL 94 V-0 등급의 높은 난연특성을 나타내었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.