• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.211-214
• /
• 1999

The stress distribution around the cutout of composite cylindrical shells with a circular or elliptical reinforced cutout subjected to axial compression or tension is studied by asymptotic method. Analytical solutions used a Donnell type orthotropic shell theory are presented by the defined stress concentration factor and are compared to experimental results. The experiment used the universal testing machine (UTM), strain gage and fixtures designed/manufactured for axial tension test of a cylindrical shell is carried and the composite material used in the experiment is plain weave glass fiber reinforced plastic (GFRP).

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.3
• /
• pp.46-59
• /
• 1989

The purpose of test fixture is to mechanically couple energy from a shaker into a test specimen. And then it is necessary to design a fixture of shich the fundamental natural frequency is over than one half times as high as the highest frequency of interest. But the dynamic behavior of vibration test fixture is usually different from, often far different from, what has been calculated. In this paper, the optimal dimensionless frequency parameter, ${lambda}$'s, are calculated from the test results of a various and complex shaped fixtures.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.38-41
• /
• 2000

This is the continued paper as part 2 in this study. In order to prevent the production defects, the optimum design of product, fixtures and their making are very significant division. Especially the result of modelling and its analysis become the characteristics of this paper that nothing might be over seen before such as this type of research method on all processes.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.137-138
• /
• 2015

본 논문은 알루미늄 재질로 된 방열판을 LED조명기구에 적용해서 열 해석을 한 것으로서, PCB에 25[W]급 LED를 배치하여 COMSOL Multi-physics로 시뮬레이션 하였다. 그 결과 LED와 PCB 경계면의 온도는 $69^{\circ}C$이고, PCB바닥면의 온도는 $28^{\circ}C$로 실제작한 FR-4 재질의 LED Module과 근접한 온도임을 확인 할 수 있었다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.385-388
• /
• 2011

The electromagnetic wave occurs primarily LED lighting equipment in the interior medical imaging information a lot of high-frequency equipment environment installation. It generated by lighting fixtures mach damage to patients as well as non or no operation. It can be reduced through noise attenuation and filter change. It associated with the capacitors and inductors can reduce by are used frequency efficiently, Attenuation circuit does not significantly affect the radiation medical equipment devices

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.34
• /
• pp.115-121
• /
• 1995

The objective of this study is to develope an effectiveness measurement technique for U-shaped JIT production line by computer simulation. A small and medium sized automobile brake master cylinder manufacturing plant is studied for productivity improvement The production line is analysed and improved by applying Low Cost Automation, special jigs and fixtures, and facilities layout changes. An experimental simulation model is built using SIMAN(SIMulation ANalysis) simulation software for the production system analysis.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2156-2158
• /
• 2000

Proposals on optimized ignition type of fluorescent fixtures by comparing electrical and optical characteristics for magnetic ballast and electronic starter type, magnetic ballast and glow starter and electronic ballast.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.334-336
• /
• 1998

This paper deals with the problem of the magnetizing yoke fixture. The experimental test has been performed using the yoke fixture made of bakelite as well as ferromagnetic. The magnetizing current is the most essential criterial factor for delivering the impulse energy to the magnetized material, i.e ferrite core. The yoke of nonferromagnetic has shown its better performance in experimental results as well as in the finite element analysis.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.24
• /
• pp.193-198
• /
• 1991

Is this paper the selection of a set of process plans is considered for a flexible manufacturing systems. This problem arises in the metal working industry when numerical controlled(N/C) machines are used to manufacture parts. In this paper a new concept to reduce the size of problem is proposed. A corresponding Integer programming model is formulated. The model formulated is to minimize corresponding manufacturing cost and minimize the number of tools and auxiliary devices such as fixtures, grippers, and feeders.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.261-267
• /
• 2004

교실 내에 빛을 공급하는 두 가지 요소는 인공광원과 주광이다. 일단, 빛이 실내에 방사되면 각 시설물의 표면은 빛을 반사하여 제 2의 광원 역할을 한다. 따라서 교실 내 조도를 높이는 확실한 방법은 광도가 높은 등기구를 설치하고 창을 정남향으로 내면 되겠지만 이것이 여의치 못할 경우에는 제 2의 광원인 시설물의 표면속성을 변화시켜 조도를 높일 수도 있다. 본 논문에서는 일정한 인공광원과 주광 하에서 시설물의 속성을 변화시켜 조도에 미치는 영향을 알아보고 개선사항을 연구해 보았다.