• The Journal of the Korean dental association
• /
• v.32 no.2 s.297
• /
• pp.123-124
• /
• 1994

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.486-491
• /
• 2004

A comparative study on the implant screw loosening under the initial clamping force and cyclic loads was conducted. The experiments were performed to evaluate the screw loosening behavior of the internal and external implant systems. It was found that the screw loosening torques of implant systems were significantly affected by the way how the abutment and fixture were connected due to the difference in the load transfer mechanism between abutment and fixture.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.162-167
• /
• 2013

The most important factor in an aircraft manufacturing is stability and weight reduction. Most of aircraft components are designed with thin plate type to satisfy weight reduction needs. The thin plate is difficult to be machined because it is apt to be vibrated by dynamic force generated in milling process. The most critical factor in machining of aluminum thin plate is width and thickness between stiffeners. So we tested many cases to find out the machinable minimum thickness at different width between stiffeners. And with the data obtained from many tests, this papers suggested the standard width thickness relation that is machinable without vacuum fixture. Machinist will be able to reduce the cost of aircraft thin plate parts by reducing the number of vacuum fixture used by the help of this standard.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.57-63
• /
• 2006

Gravitational centers of precise spinning components must coincide with the rotational centers of those to reduce noise and vibration and to extend those lift as well. Therefore quality control should be performed in the manufacturing process, in which the unbalance moments are accurately measured. In this paper 3-point weighing method is adopted to measure the unbalance moment of small-sized precision spinning elements using electronic scales with 0.1 mg resolution. Firstly methods to eliminate the fixture error and to reduce the effects of frictional force that is known as side effect, are proposed. A measuring system is developed and various experiments are performed to verify the proposed approach. The measured and calculated values are analysed in statistical methods, and this provides the errors of the measuring system. The results show that the proposed theory and test procedures gives reliable unbalance moments and gravitational centers.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.107-112
• /
• 2009

In a planning of the Stage lighting Fresnel and Plano Convex lighting fixture, we carry out illumination simulation. After lighting install studio construction, in indoor we measured illuminance in order to compare the simulation results. And we study the errors between them.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.2
• /
• pp.1-7
• /
• 1997

커패시터 방전회로의 제작 및 시험을 위해서는 고가의 비용과 위험요소가 내재되어 있으며 특히 고전력 응용을 위해서는 이러한 요소는 더욱 커지게 된다. 그 대체방법으로는 컴퓨터를 이용하여 이 회로의 동작을 모델링하고 시뮬레이션하는 것이다. 본 연구에서는 커패시터 방전 임펄스 착자가 착아 요크 시스템을 위한 SPICE 모델을 개발하고 시뮬레이션 결과를 실제 시스템의 측정치와 비교하였다. 또한 착자기 시스템의 방전회로를 위한 온도산정방법을 제안하였다. 특히 임펄스 착자기의 방전회로의 온도산정은 착자회로 설계의 중요한 지침이 되므로 극히 중요하다. 본 연구에 이용된 착자기는 저손실 유입 커패시터이며, 최대 1200[V]의 충전이 가능하다. 이러한 착자 모델의 개발을 통하여 고임펄스 방전 회로의 설계 및 개발에 소요되는 시간 및 비용을 절약하는데 크게 기여할 것이다.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.1
• /
• pp.63-69
• /
• 2017

In this paper, composite laminate pull-through resistance was analyzed using the FEM method and compared with test results. 2D and 3D simplified FEM models, a nonlinear analysis, and a progressive failure analysis utilizing three composite laminate failure theories Maximum Stress, Maximum Strain, and Tsai-Wu were used to predict the FEM results with the test results. The load and boundary conditions of the test were applied to the FEM to simulate the test. A composite laminate pull-through test (ASTM D7332 Proc. B) was designed with a special fixture to collect more precise data. The test results were compared with the FEM analysis results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.543-551
• /
• 2017

SOL (Short, Open and Load) calibration based on iterative error sensitivity is proposed in this paper. With advanced SOL calibration, unknown parasitic parameters at on-chip terminations are accurately estimated up to 20 GHz. Artificial terminations are designed on printed circuit board (PCB) to experiment the proposed method. On-chip SHORT, OPEN and LOAD fabricated inside silicon shows the accuracy of proposed calibration method through the comparison with known fixture S-parameter after de-embedding.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.74-75
• /
• 2014

In remodeling business or construction of both new strucures and existing structures, Case that pile foundation was set is often. Micro pile, holding compressive force and tensile force by spherical friction, is supported by skin friction rather than end bearing capacity. but, This is weak in tension. Active area of micro pile's skin friction is narrow and micro pile don't do unification behavior hence. So bearing capacity was not fully mobilized in existing researching. In this study, in order to compensate for this method, micro pile to install Resisting Fixture is proposed.

• KIEAE Journal
• /
• v.10 no.2
• /
• pp.71-78
• /
• 2010

Spill light by street lighting is a kind of light pollution creating cozy night atmosphere, interfere visual private and cause insomnia at night. This study was to survey light trespass of the windows in residential buildings. According to outdoor lighting control guidance in Seoul, three different areas were selected to investigate the trespass light to windows. The results were as follows: 37% of the buildings of 386 buildings were influenced by street lighting, and 47% of windows were occurred light trespass. Therefore, the street lighting affected light trespass at night in survey area. The main reasons of light trespass were luminaire type, luminaire pole height, and street width. For protecting the light trespass to windows, it is necessary to non-cutoff fixture to full cutoff fixture by the street width.