• 해양환경안전학회지
• /
• 제29권4호
• /
• pp.372-379
• /
• 2023

국제유가가 배럴당 85달러에서 하반기에는 최대 100달러까지 오를 것으로 예상하여 세계 시장에서 해양플랜트 발주가 늘어날 가능성이 크다. 해양플랜트의 주요 특징 중 한 가지는 탑사이드에 대형 헬리데크가 위치하며 경량화 및 내부식성을 위하여 알루미늄 합금을 구조의 기본 재료로 사용하고 있다. 선주사는 긴급 상황 발생 시 신속한 인명 대피를 위하여 헬리콥터 크기를 대형화하는 추세이고, 헬리콥터를 데크에 안정적으로 고박할 수 있는 장치의 안전사용하중도 증가가 필요하다. 알루미늄 재질의 특성상 용접에 의한 구조 강도 저하가 크기 때문에, 고정 장치는 데크에 매립하여 볼트로 고정하는 방식으로 설계가 필요하다. 본 연구에서는 대형 헬리데크(직경=28m)에 사용이 가능한 헬리콥터 고정 장치를 개발하기 위하여 알루미늄 합금 6082-T6를 적용한 모델을 개발하였다. 개발된 고정 장치는 실제 고박에 사용하는 하중 조건을 만족하도록 비선형구조 강도 계산을 통하여 검증하였다. 45도 경사각을 갖는 하중 조건은 국부적인 소성 붕괴로 인하여 90도 조건에 비해 낮은 최종강도를 나타냈다. 최종 모델에 대한 비선형 구조 붕괴 거동은 강도 실험과 경향이 유사하게 나타났다. 본 연구에서 도출한 주요 내용은 유사 알루미늄 기자재의 구조 강도 검토 시 참고 문헌이 될 것으로 판단된다.

• Applied Biological Chemistry
• /
• 제40권2호
• /
• pp.134-138
• /
• 1997

대기 $CO_2$ 상승시 인산공급이 대두식물체의 광합성 및 질소고정에 미치는 영향을 살펴보고저 Bradyrhizobium japonicum MN110을 접종한 대두 식물체를 인산결핍구(0.05 m-P) 및 대조구(1.0 mM-P)를 처리하여 정상 $CO_2(400\;{\mu}l/L)$와 상승 $CO_2(800\;{\mu}l/L)$의 조건인 phytotron에서 35일 동안 재배하였다. 인산결핍은 건물량을 정상 $CO_2$ 처리시 51%, 상승 $CO_2$ 처리시 64%를 감소시켰고 총 엽면적도 유의성있게 감소시켰으나 specific leaf weight는 증가시켰다. 광합성 속도 및 잎내부의 $CO_2$농도는 인산결집구에서 감소하였고 그 정도는 $CO_2$ 상승처리시 더욱 컸으며 질소고정능과 근류생체량도 인산결핍시 감소하였으나 잎의 질소농도는 인산대조구가 30% 감소하였다. 이러한 결과는 $CO_2$ 상승조건에서도 인산이 결핍될 경우 식물생육을 촉진시키지 못하며 인산은 정상 $CO_2$ 농도시 보다 $CO_2$ 상승조건에서 근류의 성장과 작용에 더욱 중요한 역할을 하는것으로 유추된다.

• 한국진공학회지
• /
• 제22권5호
• /
• pp.262-269
• /
• 2013

집속 이온빔 장비는 나노크기의 패턴을 제작하는 한 방법이지만, 정밀한 제작은 쉽지 않다. 그러므로 집속 이온빔 장비로 샘플을 제작할 때 고려해야 하는 공정 조건을 정리하여 초보자도 샘플제작이 가능하도록 도움을 주고자 한다. 본 장비로 원하는 나노크기의 패턴을 제작하기 위해서 집속 이온빔 장비의 공정변수들을 최적화 하는 과정이 중요하다. 가공할 때 고려해야 하는 변수에는 빔 전류량(빔 크기)과 도즈(빔 지속시간)가 있다. 도즈를 결정한 후에 패턴을 제작하는데 걸리는 시간과 패턴의 크기를 고려하여 빔 전류량을 선택하면 된다. 여기서 도즈는 제작하려는 나노크기의 패턴의 금속 두께에 따라 결정이 된다. 이 논문에서 최적화한 1 pA의 빔 전류와 $0.1nC/{\mu}m^2$의 도즈의 공정조건에서 100 nm 두께의 금 박막 위에 타원형의 구멍을 정밀하게 제작할 수 있다.

• 대한치과기공학회지
• /
• 제23권2호
• /
• pp.179-188
• /
• 2002

With regard to the manufacture of dental prosthesis, all the dental mechanism is of vital significance at the aspect of activating its function by fixing the prosthesis to Patient's oral cavity. However, if there we will take our immediate action without the discretion about its process none the less for the importance of dental mechanism, then we might have a serious problem. Accordingly, there need to pay attention to the dilatability makes up for the shrinkage state occurring by the feature of metal materials and manufacturing process which appeared in the process of dental mechanism, which eventually is expected to playa very important role in casting a dental prosthesis appropriate to one's oral tissue. This study was designed to take into account of the effects on margin consistency of prosthesis according to the continued time of casting-ring in the course of the casting of dental alloy. For this, the researcher made an experiment on the casting of dental alloy, its dilatability, and the change of phase. The results of this study were as follows: First, the researcher could see that the sample which was cast under the condition of $650^{\circ}C/20$ Minutes(the continued time) was far superior to others at the aspect of margin consistency. Second, according to the measurement of expansion coefficient by Dilatometer, the researcher perceived the fact that the expansion-coefficient showed a maximum of $37.1{\mu}m$ considering the sample's length which was cast with ordinary temperature under the condition of $650^{\circ}C/20$ Minutes. Third, from the result of X-ray diffraction under the condition of $650^{\circ}C/20$ Minutes(the continued time), the researcher could find that there's no difference between the change of phase and its intensity. As mentioned above, the researcher could ascertain the fact that its contraction don't give rise to the change of phase.

• 한국표면공학회지
• /
• 제52권4호
• /
• pp.194-202
• /
• 2019

A systematic investigation was made on the influence of processing parameters such as gas composition and treatment temperature on the surface characteristics of hardened layers of low temperature plasma nitrided 316L Austenitic Stainless Steel. Various nitriding processes were conducted by changing temperature ($370^{\circ}C$ to $430^{\circ}C$) and changing $N_2$ percentage (10% to 25%) for 15 hours in the glow discharge environment of a gas mixture of $N_2$ and $H_2$ in a plasma nitriding system. In this process a constant pressure of 4 Torr was maintained. Increasing nitriding temperature from $370^{\circ}C$ to $430^{\circ}C$, increases the thickness of S phase layer and the surface hardness, and also makes an improvement in corrosion resistance, irrespective of nitrogen percent. On the other hand, increasing nitrogen percent from 10% to 25% at $430^{\circ}C$ decreases corrosion resistance although it increases the surface hardness and the thickness of S phase layer. Therefore, optimized condition was selected as nitriding temperature of $430^{\circ}C$ with 10% nitrogen, as at this condition, the treated sample showed better corrosion resistance. Moreover to further increase the thickness of S phase layer and surface hardness without compromising the corrosion behavior, further research was conducted by fixing the $N_2$ content at 10% with introducing various amount of $CH_4$ content from 0% to 5% in the nitriding atmosphere. The best treatment condition was determined as 10% $N_2$ and 5% $CH_4$ content at $430^{\circ}C$, where the thickness of S phase layer of about $17{\mu}m$ and a surface hardness of $980HV_{0.1}$ were obtained (before treatment $250HV_{0.1}$ hardness). This specimen also showed much higher pitting potential, i.e. better corrosion resistance, than specimens treated at different process conditions and the untreated one.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.79-86
• /
• 2012

The aim of this general remarks is to introduce the results concerning the thermo physical, charging, developing and fusing characteristics of micro-encapsulated (MC) model toners in order to apply to the toner of electrophotographic system at the condition of a low temperature. In order to clarify the fusing mechanism of MC toner, rheological analysis of the toner was chosen. It was suggested that MC toner had a different fusing mechanism compared with non-MC toner. Some kinds of MC model toners showed a good result on adhesion test as well as cohesion test. Also, it was possible to get the good charging and development characteristic of MC toner for printing test with laser printer.

• 한국의상디자인학회지
• /
• 제11권2호
• /
• pp.169-181
• /
• 2009

The purpose of this study was to provide basic information for developing a smart taekwondo uniform with enhanced functionality for children by investigating the wearing condition and satisfaction of taekwondo uniform among taekwondo training children. The data were collected from 162 children living in Seoul and Daegu. For data analysis were performed descriptive statistics, ${\chi}2$ -test and t-test using SPSS Ver. 12. The results of the analysis are as follows. The results revealed that respondents wearing the general training uniform during their training period were the most. The dissatisfaction for the general training uniform was a high price, lack of symbolic, lack of functionality in textiles, lack of variety in design and unfittness of size in order. The developed uniform can adjust the length using a zipper type fastener, and can be used in all seasons as the lining is detachable. It also uses nano-silver material, and soil release finish. It enhances the functionality of movement by treating with raglan sleeve and sleeve hem velcro tape, and designs the upper garment in the draping. Safety is improved through attaching GPS, and elastic material is mixed in the neckline for putting on and off easily. Piece of cloth is added inside the closing of the upper garment. Rings are made for fixing the taekwondo uniform belt. Pocket is designed in the lower garment and colors are multiplied.

• 한국토양비료학회지
• /
• 제45권4호
• /
• pp.593-601
• /
• 2012

Heavy metals and metalloids removal can be considered as one of the most important world challenges because of their toxicity and direct impact on human health. Many processes have been introduced but biological processes of remediation seem to offer the most suitable solution in terms of efficiency and low cost. Actinobacteria constitute one of the major microbial populations in soil, and this can be attributed to their adaptive morphological structure as well as their exceptional metabolic power. Among microbes, actinobacteria are morphologic intermediate between fungi and bacteria. Studies on microbial diversities in metal contaminated lands have shown that actinobacteria may constitute a dominantly active microbiota in addition to ${\alpha}$ Proteobacteria. Furthermore, isolation studies have shown metal removal mechanisms which are reminiscent of notable multiresistant strains, such as Cupriavidus metallidurans. Apart from members of genus Streptomyces, which produce more than 90% of commercialized antibiotics, and the nitrogen fixing Frankia, little attention has been given to other members of this phylum. This is because of difficult culture condition requirements and maintenance. In this review, we focused on specific isolation of actinobacteria and their potential applications in metal bioremediation and plant growth promotion.

• Journal of Microbiology and Biotechnology
• /
• 제5권2호
• /
• pp.100-104
• /
• 1995

Production of $poly-{\beta}-hydroxybutyrate$ (PHB) in a strain of Azotobacter chroococcum, a nitrogen-fixing bacteria, was investigated at various levels of nitrogen and oxygen. Feeding nitrogen source increased both cell growth and PHB accumulation. Oxygen supply appeared to be one of the most important operating parameters for PHB production. Both cell growth and PHB accumulation increased with the sufficient supply of air in the fed-batch fermentation of the strain. However, it was also noted that keeping the oxygen level under limited condition was critical to achieve high PHB productivity. A high titer of PHB (52 g/l) with a high cellular content (60%) was obtained after 48 hr of fed-batch operation by controlling the oxygen supply. Dual limitation of nitrogen and oxygen did not further increase the PHB accumulation probably due to the greater demand for reducing power and ATP for nitrogen fixation.

• 에너지공학
• /
• 제24권3호
• /
• pp.122-127
• /
• 2015

본 연구에서는 클린룸에서의 3차원 유동해석을 수행하였다. 로봇실험 장치에서 로봇의 움직임에 의해 형성되는 유동장에 대한 수치적인 분석을 본 연구에서는 다루고 있으며, 클린룸에서 로봇의 움직임에 대한 영향을 분진이 쌓이는 영역을 찾기 위해서 진행된다. 다관절 로봇의 움직임에 의해 생성되는 바닥 표면의 분진은 유동장 분석에 의해 예측될 수 있으며, 해석결과는 커다란 스월유동이 움직이는 로봇 주위에서 생성된다고 분석된다. 따라서, 가장 바람직한 유동 조건은 공기의 입구와 출구부의 위치를 다시 정하여 유동속도를 변화시키면서 검토해야 한다.