• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.3
• /
• pp.226-233
• /
• 1990

Fixed bed is known to be an effective heat transfer augmentation device which could be applied to heat exchangers. In this study, pressure drop in vertical cylindrical and annular fixed beds with air flowing through was experimentally investigated. Based on the experimental data and some analytical considerations, the demensionless correlation of pressure drop has been determined and shown in empirical forms. In particular, the experimental equation for the pressure drop was derived using the particle diameter and the bed diameter as variables, which would be more practical and useful in the design of heat transfer devices, instead of void fraction which had been used previously as the major variables by others. The present empirical equation obtained for the cylindrical fixed bed were found to be applicable also to an annular fixed bed when the concept of effective diameter was introduced.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.12
• /
• pp.655-660
• /
• 2004

This paper deals with the design of a fixed-structure $H_\infty$ power system stabilizer (PSS) by using an iterative linear matrix inequality (LMI) method. The fixed-structure $H_\infty$ controller is represented in terms of LMIs with a rank condition. To solve the non-convex rank-constrained LMI problem, a linear penalty function is incorporated into the objective function so that minimizing the penalized objective function subject to LMIs amounts to a convex optimization problem. With an increasing sequence of the penalty parameter, the solution of the penalized optimization problem moves towards the feasible region of the original non-convex problem. The proposed algorithm is, therefore, convergent. Numerical experiments show the practical applicability of the proposed algorithm.

• Journal of Korean Dental Science
• /
• v.15 no.1
• /
• pp.84-91
• /
• 2022

An all-on-4 restoration allows edentulous patients to use a fixed prosthesis with a minimum number of implants. These implant-supported fixed complete dentures have traditionally been fabricated as screw-retained or cement-retained prostheses. However, it is difficult to passively fit the long-span full-arch prosthesis using the screw-retained type restoration, and predictable retrievability is not obtained with the cement-retained type. This case report describes a prosthesis fabricated using a combination of the two retention types. The screwmentable method allows the implant-supported fixed complete denture to achieve a passive fit at the connection with retrievability. In addition, a framework with an optimized size was designed by using digital dental technology.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.1
• /
• pp.14-24
• /
• 2011

In this paper, design optimization for mixed-flow pump impellers and diffusers has been studied using a commercial computational fluid dynamics (CFD) code and DOE (design of experiments). We also discussed how to improve the performance of the mixed-flow pump by designing the impeller and diffuser. Geometric design variables were defined by the vane plane development, which indicates the blade-angle distributions and length of the impeller and diffusers. The vane plane development was controlled using the blade-angle in a fixed meridional shape. First, the design optimization of the defined impeller geometric variables was achieved, and then the flow characteristics were analyzed in the point of incidence angle at the diffuser leading edge for the optimized impeller. Next, design optimizations of the defined diffuser shape variables were performed. The importance of the geometric design variables was analyzed using $2^k$ factorial designs, and the design optimization of the geometric variables was determined using the response surface method (RSM). The objective functions were defined as the total head and the total efficiency at the design flow rate. Based on the comparison of CFD results between the optimized pump and base design models, the reason for the performance improvement was discussed.

• KIEAE Journal
• /
• v.15 no.3
• /
• pp.49-56
• /
• 2015

Purpose: Due to recent increase on energy consumption for light in building, many studies to mitigate this issue have been conducted. Various researches have been carried out to suggest light shelf as one of the solutions, but researches for its reflectivity is very few. In fact, existing research on light shelf shows that utilizing more than 90% of high-illumination materials causes imbalance of glare and illuminance. Method: Therefore this research aimed to evaluate the performance of light shelves depending on reflectivity and to identify proper solution through test-bed. Result: The results are following: 1) Increased reflectivity generally contributed to increase of indoor illuminance but degrade uniformity factor related with indoor comfort of light environment. 2) The $0^{\circ}fixed$ light shelf with 75% of reflectivity and width of 300mm and 40mm appeared to consume more energy than other shelves. Therefore, it is analyzed as unsuitable. 3) This research was conducted by calculating appropriate angle of light shelf around winter and summer solstices and vernal/autumnal equinox. Based on this, performance evaluation was undertaken depending on reflectivity of movable light shelf, which is activated by external sources and can be applied with lower reflectivity than fixed shelf. However, one exception was a movable shelf with width of 600mm that increased light energy consumption when 75% of reflectivity was applied. 4) Performance evaluation of fixed and movable light shelf showed that the shelf with 80% of reflectivity came up with suitable results, but 75% of reflectivity may be applied depending on the width and angle of the shelf. This research is meaningful in that estimation of appropriate reflectivity of light shelf can resolve the glare problem and improve light environment, and further research would be desirable under more diverse conditions to identify proper solution.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.1
• /
• pp.102-112
• /
• 2007

This paper includes an analysis of face recognition algorithm to design hardware and presents fixed point model in accordance with it. Face recognition algorithm detects the positions of face and eyes to make use of their feature data to detect and verify human faces. It distinguishes a particular user by means of comparing them with registered face features. To implement the face recognition algorithm into hardware, we developed its fixed point model by analyzing face feature parameters, face acquisition data, and feature detection parameters and operation structure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.218-224
• /
• 2017

The implant-supported fixed dental prosthesis in irradiated maxilla needs meticulous treatment planning due to low bone healing capacity. All-on-4 concept implantation can reduce the number of implants to be placed avoiding bone grafting procedure. Conventionally, prefabricated angled abutments for tilted implants have been used. However, in this case, it was replaced with computer-aided design and computer-aided manufacturing (CAD/CAM) abutment. This case report described all-on-4 concept implantation and fabrication of CAD/CAM zirconia fixed dental prostheses using CAD/CAM titanium abutments.

• Journal of the Korean Society of Costume
• /
• v.59 no.2
• /
• pp.29-41
• /
• 2009

Perception between real object and recognized subject of human on objective subject is not the same. The reason Is that individual perception of visual design components are transmitted as the image of whole. It is required process of visual perception. Therefore, I developed the vision of seeing image of pattern which is based on Gestalt visual perception theory in clothes. The summary of this study's results is like followings. Extremely antagonistic terms which are specialized by formative characteristics of formative components are clearness and blur of outline/ fixed shape and non-fixed shape/ visuality and tangibility of representation/ simplicity and complexity of structure/ invariability and variability of mobility/ symmetry and asymmetry of arrangements singularity and plurality of group number. The expression of motive shows that clearness, fixed shape, visuality and simplicity pursuit Determination image, and blur, non-fixed shape, tangibility and complexity pursuit Ambiguity image. The arrangements of motive shows that invariability, symmetry and singularity pursuit Order image, and variability asymmetry and plurality pursuit Disorder image. Therefore, the standard of the coordinator of Pattern image positioning is established as Determination and Ambiguity of motive are X-axis, and Order and Disorder of pattern are Y-axis. As the frame of Pattern image positioning, four separated dimensions have made.

• Journal of Aerospace System Engineering
• /
• v.13 no.1
• /
• pp.11-17
• /
• 2019

In this paper, the performance of a small fixed wing unmanned aerial vehicle is predicted theoretically with the minimum specifications and a low Reynolds number. Based on the results, it was compared with the results of an actual flight test and simple electric motor wind tunnel test. As a result of the validity of the analysis, a 3.5 kilograms class fixed wing small UAV can predict aerodynamic performance by general theory analysis. However, the required thrust was analyzed as a possible design error. Based on the results of this study, this paper proposed a method to minimize the design error when developing small fixed wing UAV flying in a low Reynolds number.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.4
• /
• pp.122-128
• /
• 2018

A compound drone that combines a fixed wing and a rotary wing is an aircraft that can take off and landing vertically, and can increase flight time and fly faster with fixed wings. The compound drones are divided into many types depending on the method of adding the thrust vectoring or the lift fan and the position of the rotor. In this study, we designed and fabricated a composite drone with four V-TOL motors in a fixed-wing, and assigned missions to the aviation body, hence judged mission accuracy using the actual flight test. The design process and the mission evaluation process employed in this study can be utilized on the development of various unmanned aerial vehicle.