• 한국의류산업학회지
• /
• 제2권2호
• /
• pp.138-145
• /
• 2000

The problem of fitting of children's clothing was researched through survey papers. The survey subjects were the mothers of elementary school students (grade 1 6) and the appropriateness of size, satisfaction with size, and fittings were asked. The survey area was divided into urban and rural areas. The following is the result: The children's clothing was mostly purchased in stores that carry lower-middle price range. The elements considered upon purchase were in the order of price, size, color and patterns. The frequency of purchase is 2 outfits a year, and the highest rate purchase was shown during the change of seasons. The size was picked through trying on the garment. The preferred indication of size was the one marked according to body size. The most popular size upon purchase was one size bigger than the proper fitting size. Mothers want their children to be able to wear one outfit for two years and actually children were able to wear them for two years. The highest degree of satisfaction upon proper fitting was bust girth and shoulder breath. The most frequent reason for a new purchase is the length. The most frequent dissatisfaction is the way buttons are sowed on.

• 한국생활과학회지
• /
• 제15권5호
• /
• pp.791-802
• /
• 2006

The construction of athlete's tight-fitting garments by reducing the elastic knit pattern is an interesting subject, which directly influences the performance of the wearer. Therefore, relationships between the reduction rates of the men's pants pattern obtained using measurements of Size Korea 2004 and clothing fitting were explored to improve clothing comfort. Two pattern making methods were developed and the reduction rates were applied to those pants depending on the parts of human body. The four male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales during 4 consecutive days. While wearing the garments, subjects were kept four various postures including waist flexion and sitting etc by requests of the researchers. Likert type scale was used for the evaluation and 7 point indicates that it gave the best fit as tight-fitting pants. As results, differences in the length and girth between two piece pants pattern(style 1) and one piece pants pattern(style 2) were 0.0$\sim$0.3cm. Between two pattern making methods, one piece pants pattern(the style 2) was superior to two piece pants pattern in terms of subjective sensation and fit. Among eight tight-fitting pants, C, D, G, H pants were superior in terms of fitting and stability of waist and hip part to the others. ill case of tight-fitting pants, the reduction rate of the pattern in the course direction, the reduction rate of T2/3(66%) was better than that of T/2(50%), but the reduction rate of the pattern in the wale direction, that of the part of crotch, which was very sensitive part, should be kept the same as suggested earlier by Ziegert(1988).

• 한국의류학회지
• /
• 제40권5호
• /
• pp.894-909
• /
• 2016

This study analyzed a somatotype that was more suitable to a virtual fitting model and to improve the reality of a virtual model size. We analyzed 1,868 women 18-59 years old from the 6th Size Korea data. First, factor analysis was done for abstracting new criteria for dividing the somatotype; subsequently, we selected the waist height proportion to stature (body proportion) and drop (torso shape). Next, the cluster analysis was done with these criteria and 7 body proportion types and 11 torso shapes were distinguished. A virtual model size for the most common somatotype was also developed by a regression analysis of constituting sizes of each factor that was compared with body sizes well as with Clo's virtual model size. The model of this research showed a high similarity in sizes with body as well as improved better realisty than the Clo model which presented size problems such as longer limbs, bigger bust, smaller waist and a smaller arm circumference than the real body.

• 대한가정학회지
• /
• 제44권10호
• /
• pp.145-154
• /
• 2006

The purpose of this study was to examine how the garment sizes by junior brand manufactures reflect Tween Generation's (ages from 5th grade to 9th grade) actual body sizes. They have diverse clothing preferences in styles and fitting levels as well as diverse body sizes and shapes. The subjects of this study were 520 students (the 5th and 6th grades in elementary schools, the 1st, 2nd and 3rd grades in middle schools) who lived in Jeonju. A questionnaire was used in this study. The data were analyzed by frequency, means, t-test and $\chi^2$. The results were as follows. In the selection of garment size, both the girl and boy students most preferred selecting garments after trying them on by themselves. Boy students tended to select garment size according to their mothers' advice. On the other hand, elementary school students showed a tendency to select garment size with their mothers. In fitting sizes, middle school girls wanted the size to fit tightly rather than loosely on their bodies much more than elementary school girls. Junior brand manufacturers produced sizes that well reflected actual body sizes of elementary and middle school girls. Specifically, the pants best covered their body sizes.

• 감성과학
• /
• 제6권1호
• /
• pp.17-26
• /
• 2003

의류상품의 전자상거래 시장이 확대됨에 따라 인터넷쇼핑에서 의류를 구매할 때 선택한 의류를 착용한 자신의 모습을 확인하는 도구로 가상피팅모델이 제공되고 있다. 본 연구에서는 가상피팅모델 구축 시 사용자의 주관적인 체형인식을 반영할 필요가 있는지 알아보기 위하여 여성의 신체 치수나 체형에 대한 인식이 어떻게 다른지 연구하였다. 의류학 전공 여자대학원 50명을 대상으로 실험한 본 연구의 결과는 인체부위에 대한 개인의 치수인식이 체형에 따라 다름을 보여준다. 연구자들은 인터넷 의류 쇼핑용 가상피팅모델을 구축하기 위해서는 사용자 신체치수뿐만 아니라 사용자가 인지하는 자신의 체형특성을 반영할 필요가 있다고 결론지었다 특히 배가 많이 나온 체형도 자신이 실제보다 배가 나오지 않은 체형으로 생각하는 경향이 있으므로 여성이용자에게 거부되지 않는 가상피팅모델을 구축하기 위해서는 지나치게 극단적인 체형의 가상피팅모델의 구축은 신중하게 고려해야함을 시사하였다.

• 대한가정학회지
• /
• 제50권7호
• /
• pp.37-48
• /
• 2012

The purpose of this study was conducted to improve middle and high school students' satisfaction on their uniforms and to provide basic information for their better size systems. This study analyzed the purchasing and modification behavior, fitting evaluation, and size decision aspect of students. This study was surveyed middle and high schools students in Daegu City. The collected data were analyzed by frequency analysis, percentage, t-test, chisquare test. The results of this study are as follows; 61.3% of the students interviewed have experienced to modify their uniforms. Since the unfittable size and non-fashionable design caused the students to modify their uniforms, it seems necessary to set up the various uniform sizes, as well as figuring out its aesthetic characteristic. Between middle school and high school students, and students with a uniform modification and students without a uniform modification, there were partially differences in fitting evaluation, and size decision.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.113-118
• /
• 1999

The design program of fitting and thrust block including various shapes and sizes was developed for the GMR project (Great Man-made River Project in Lybia). It can automatically recalculated the minimum size of fitting required for the structural performance and can also determine the proper size of fitting for the safe and economic design by users. It was found that the results of this program was accurate and efficient when it was compared to other references. This program is also developed with GUI (Graphic User Interface) technology for the convenience of users.

• 한국경영과학회지
• /
• 제20권3호
• /
• pp.17-29
• /
• 1995

Recently, neural network models have been employed as an alternative to regression analysis for point estimation or function fitting in various field. Thus far, however, no theoretical or empirical guides seem to exist for selecting the tool which the most suitable one for a specific function-fitting problem. In this paper, we evaluate performance of three major function-fitting techniques, regression analysis and two neural network models, back-propagation and linear-Hebbian-learning neural networks. The functions to be fitted are simple linear ones of a single independent variable. The factors considered are size of noise both in dependent and independent variables, portion of outliers, and size of the data. Based on comutational results performed in this study, some guidelines are suggested to choose the best technique that can be used for a specific problem concerned.

• 감성과학
• /
• 제5권4호
• /
• pp.1-10
• /
• 2002

개인별 신체 특성을 나타내는 가상피팅모델을 이용하여 제공되는 가상 착용 서비스는 웹을 기반으로 한 인터넷 의류 쇼핑의 흥미를 더해준다. 본 연구의 연구자들은 2000년과 2002년에 개발된 미국의 가상피팅모델과 국내에서 개발되었던 가상피팅모델의 개발 기술의 특성과 변화를 분석하였다. 연구결과는 가상피팅모델의 구축을 위해서는 인체의 치수, 형태, 얼굴의 특징들에 관한 정보 입력이 필요하며, 이때 요구되는 정보는 미국과 한국의 사이트에서 차이가 있음을 밝혔다. 미국의 사이트는 정면이나 측면의 실루엣에 대한 정보의 입력이 요구되는 반면 한국의 사이트는 더 많은 인체 치수 관련 정보를 요구하였다. 2000년에 개발되었던 한국의 가상피팅모델은 길고 좁은 프로포션으로 표현되어 사실적인 표현이 부족하였던 반면 2002년 미국에서 개발한 가상피팅모델은 다양한 인종의 특성을 반영하며, 그래픽 기술의 발전으로 사실적으로 표현된 가상피팅모델을 제공하는 것으로 나타났다.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.2095-2101
• /
• 2008

In this paper, we consider a performance improvement of neural network for predicting defect size of steam generator tube using early stopping. Usually, neural network is trained until MSE becomes less than a prescribed error goal. The smaller the error goal, the greater the prediction performance for the trained data. However, as the error goal is decreased, an over fitting is likely to start during supervised training of a neural network, which usually deteriorates the generalization performance. We propose that, for the prediction of an axisymmetric defect size, early stopping can be used to avoid the over-fitting. Through various experiments on the axisymmetric defect samples, we found that the difference bet ween the prediction error of neural network based on early stopping and that of ideal neural network is reasonably small. This indicates that the error goal used for neural network training for the prediction of defect size can be efficiently selected by early stopping.