This study identifies methods to design patterns for jeans that are suitable for women in their twenties. Five patterns suggested by previous researchers were used to draw the same size of jeans (waist 67 and hip 91). The author compared and analyzed the measurements and shapes of the patterns, ranging from waist to crotch. Samples were produced based on these patterns and then tests were conducted to observe the dynamic functions and exteriors of the samples. The dynamic functions observed in this study include walking, ascending stairs, descending stairs and sitting on chairs. The results of the current study are as follow. The best evaluated pattern in terms of exteriors is the one where the hips and thighs are tightest compared to other patterns and where the back part is wider than the front part. This pattern also received high evaluations in dynamic functions due to comfort when walking. Regarding ascending or descending stairs, the tests found that all its parts (except the front crotch) are more comfortable than those of any other patterns. All these results show that a comfortable fit and easy movement is possible when the crotch width of the back is broader than the hip width so that the hips are comfortably supported.
Purpose: The purpose of this study was to investigate the effect of the number of measurement points on the calculation of transverse relaxation time (T2) with a focus on muscle T2. Materials and Methods: This study assumed that muscle T2 was comprised of a single component. Two phantom types were measured, 1 each for long ("phantom") and short T2 ("polyvinyl alcohol gel"). Right calf muscle T2 measurements were conducted in 9 healthy male volunteers using multiple-spin-echo magnetic resonance imaging. For phantoms and muscle (medial gastrocnemius), 5 regions of interests were selected. All region of interest values were expressed as the mean ${\pm}$ standard deviation. The T2 effective signal-ratio characteristics were used as an index to evaluate the magnetic resonance image quality for the calculation of T2 from T2-weighted images. The T2 accuracy was evaluated to determine the T2 reproducibility and the goodness-of-fit from the probability Q. Results: For the phantom and polyvinyl alcohol gel, the standard deviation of the magnetic resonance image signal at each echo time was narrow and mono-exponential, which caused large variations in the muscle T2 decay curves. The T2 effective signal-ratio change varied with T2, with the greatest decreases apparent for a short T2. There were no significant differences in T2 reproducibility when > 3 measurement points were used. There were no significant differences in goodness-of-fit when > 6 measurement points were used. Although the measurement point evaluations were stable when > 3 measurement points were used, calculation of T2 using 4 measurement points had the highest accuracy according to the goodness-of-fit. Even if the number of measurement points was increased, there was little improvement in the probability Q. Conclusion: Four measurement points gave excellent reproducibility and goodness-of-fit when muscle T2 was considered mono-exponential.
Individuals often make their judgments on the basis of the ease or difficulty with which information comes to mind (for reviews, see Greifeneder, Bless, and Pham 2010; Schwarz 1998, 2004). Recent research, however, has documented that variables known to determine the degree of cognitive resources invested in information processing such as personal relevance (Grayson and Schwarz 1999; Rothman and Schwarz 1998), accuracy motivation (Aarts and Dijksterhuis 1999), and processing capacity (Menon and Raghubir 2003) can affect the extent to which individuals draw on metacognitive difficulty in making their judgments. The primary aim of this research is thus to investigate whether individuals with substantial cognitive resources or those with lack of cognitive resources are more likely to draw on metacognitive difficulty when making their product evaluations. The findings from two laboratory experiments indicate that individuals who perceive a greater level of fit between their self-regulatory orientation and temporal construal (Experiment 1), and between their self-construal and the type of product benefit appeal (Experiment 2) are more likely than those who perceive the lack of such fit to evaluate a target product less positively after thinking of many rather than a few positive reasons. The findings provide supporting evidence for the two-stage backward inference process involved with the effect of metacognitive difficulty on consumer judgments in that consumer judgments based on metacognitive difficulty may require greater cognitive resources than those based on the content of information generated. Also, the current research documents further empirical evidence for the relationship between self-regulatory orientation-construal level fit and cognitive resources such that perceived regulatory-construal level fit can increase consumer willingness to invest cognitive resources into their judgment tasks. Last, the findings can help marketers differentiate purchase situations where asking consumers to think of many positive benefits from purchase situations where asking consumers to think of a few key benefits is relatively more beneficial.
조절부합은 개인의 조절초점 성향과 평가 및 판단 전략이 지닌 조절초점이 서로 일치할 때 일어난다. 본 연구에서는 평가 및 의사결정의 영역이 유발하는 조절초점과 개인의 조절초점간의 부합이 평가에 영향을 미칠 것이라고 가정하고, 향상적 영역으로는 제품 디자인 평가를, 예방적 영역으로는 도덕적 평가를 사용하여 조절부합 효과를 알아보았다. 향상초점과 관련된 영역인 미적 제품에 대한 평가 과제를 사용한 실험 1에서는 향상초점인 사람들이 예방초점인 사람들에 비해 긍정적인 것은 더 긍정적으로, 부정적인 것은 더 부정적으로 평가하였다, F(1, 95) = 4.87, p < .05. 반면 금지와 규범적인 도덕 상황을 사용한 실험 2에서는 금지적 상황에서만 예방초점인 사람들이 향상초점인 사람들에 비해 도덕적으로 옳지 않은 결정에 대해서는 더 비 도덕적인 것으로 평가하였다, F(1, 139) 4.14, p < .05. 반면 규범적 상황에 대한 평가에서는 이러한 조절부합 효과가 나타나지 않았다. 이러한 연구결과는 평가 및 의사결정 영역과 관련해서도 조절부합이 나타날 수 있음을 보여준다.
Purpose : The purpose of this study was to evaluate the machining accuracy and consistency of implant/abutment/screw combination or internal connection type. Material and methods: In this study, each two randomly selected internal implant fixtures from ITI, 3i, Avana, Bicon, Friadent, Astra, and Paragon system were used. Each abutment was connected to the implant with 32Ncm torque value using a digital torque controller or tapping. All samples were cross-sectioned with grinder-polisher unit (Omnilap 2000 SBT Inc) after embeded in liquid unsaturated polyester (Epovia, Cray Valley Inc). Then optical microscopic and scanning electron microscopic(SEM) evaluations of the implant-abutment interfaces were conducted to assess quality of fit between the mating components. Results : 1) Generally, the geometry of the internal connection system provided for a precision fit of the implant/abutment into interface. 2) The most precision fit of the implant/abutment interface was provided in the case of Bicon System which has not screw. 3) The fit of the implant/abutment interface was usually good in the case of ITI, 3I and Avana system and the amount of fit of the implant/abutment interface was similar to each other. 4) The fit of the implant/abutment interface was usually good in the case of Friadent, Astra and Paragon system. The case of Astra system with the inclined contacting surface had the most Intimate contact among them. 5) Amount of intimate contact in the abutment screw thread to the mating fixture was larger in assembly with two-piece type which is separated screw from abutment such as Friadent, Astra and Paragon system than in that with one-piece type which is not seperated screw from abutment such as ITI, 3I and Avana system. 6) Amount of contact in the screw and the screw seat of abutment was larger in assembly of Friadent system than in asembly of Astra system of Paragon system. Conclusion: Although a little variation in machining accuracy and consistency was noted in the samples, important features of all internal connection systems were the deep, internal implant-abutment connections which provides intimate contact with the implant walls to resist micro-movement, resulting in a strong stable interface. From the results of this study, further research of the stress distribution according to the design of internal connection system will be required.
A literature review and survey were conducted regarding the silhouette changes in bell bottom pants and the overall visual evaluation in accordance with the changes. The survey was disseminated from December 2015 to January 2016 to 245 women in their 20s living in Busan. The variables used for the silhouette changes in bell bottom pants were the volume of flare and the flare's starting point, and 20 pairs of terms were selected for visual evaluation. The results of the study are as follows: 1. Visual evaluations according to the volume of flare in bell bottoms indicated that females in their 20s appraised pants with a flare volume of 54 cm close to a straight silhouette and flare volume of 62 cm (recognized clearly as characteristic of bell bottom pants) to be more attractive and sophisticated than pants with flare volumes of 70 cm and 78 cm. 2.Visual evaluations according to the starting point of the flare in bell bottom pants showed that women appraised their legs as looking thinner when the flare started near the thighs. In a vertical visual evaluation, women appraised that their legs looked longer when the flare started near the knees and pants fit tightly around them. 3.The analysis of silhouette factors affecting the visual evaluation of bell bottom pants indicated that the volume of flare has more effect visually than the starting point of the flare.
The purpose of this study was to develop a well-fitting bodice basic pattern for high school irk. Two bodice patterns were first made based on the most recent existing drafting methods and sensory evaluation was done on the patterns by the present researchers Two high school girls possessing standard physical condition tried and evaluated the functionality of the garments made by the two bodice patterns. Based on the results of the evaluation, a new bodice basic pattern was developed. The new bodice basic pattern was drafted by long measurement method. The dimensions of new bodice basic pattern were as follows. Bust circumference=B/2+4cm, Arms hole depth=C.B/2+1.5cm, Back width=B/6+4cm, Front width=B/6+3cm, Back neck width=B/12+0.5cm, Back neck depth=Back neck width/3cm, Front neck width=B/12cm, Front neck depth=B/12+0.5cm. The sensory and functional evaluations were also conducted for the new bodice basic pattern and the two patterns drafted by the existing methods. The new bodice basic pattern showed better fit both visually and functionally than the existing patterns. SPSS package including means, standard deviation and one-sample T-test were used for data analysis.
원산지 관련 연구는 오랫동안 마케팅과 국제경영 분야에서 연구되어 왔다. 최근 원산지 관련 연구는 급속도로 글로벌화 되어 가는 기업환경을 반영하여 원산지 효과의 존재를 입증 및 분석하고자 하는 연구흐름과 원산지 효과의 발생과정을 설명하고자 하는 연구흐름으로 분화 및 발전해왔다. 본 연구는 최근 단순한 원가절감 차원을 넘어서 브랜드 자체와 브랜드원산지의 경쟁력을 제고시키는 전략적 수단으로 활용되고 있는 제조원산지의 선택과 관련된 기업 활동의 효과를 설명하고자 하였다. 이를 위해 제조원산지와 브랜드원산지를 긍정조합 및 부정조합으로 구분하여 원산지효과를 검증하였으며, 이 과정에서 소비자의 동기성향(조절초점)이 갖는 조절효과를 살펴보았다. 연구 결과 긍정적인 원산지의 조합(예컨대, 일본에서 생산된 프랑스 브랜드 오디오)의 경우가 부정적인 조합(예컨대, 중국에서 생산된 독일 브랜드 의류)의 경우보다 호의적인 반응을 유발함으로써 제조국 원산지효과가 있음이 확인 되었다. 또한 개인의 동기성향이 제품에 대한 메시지의 내용과 일치할 때 제품에 대한 평가가 좋아지는 조절적 적합성(regulatory fit) 효과가 존재한다는 것도 확인 되었다. 끝으로 동기성향의 조절효과를 보았을 때, 긍정적인 원산지 조합에서는 개인의 동기성향에 따라 제품평가가 달라져 조절효과를 입증할 수 있었으나, 부정적인 원산지 조합에서는 동기성향의 조절효과가 태도 부분에서만 부분 지지되고 품질지각과 구매의도 부분에서는 지지되지 않아서 동기성향의 조절효과가 존재한다는 점을 부분적으로만 확인할 수 있었다. 연구결과를 토대로 기업이 제조원산지를 결정할 때 고려할 요소와 이미 제조원산지가 결정된 상황에서 보다 효과적인 마케팅 전략을 수립하기 위한 시사점을 제시하였다.
The shock absorber is a part having a direct influence on the ride comfort, stability and dynamic load prediction of a vehicle. Thus, a rationally modeled shock absorber should be required in the dynamic analysis of vehicles. This thesis presents a modified model, based on Worden's hyperbolic tangent function, in order to fit experimental data on the velocity-damping force of a shock absorber. The hyperbolic tangent function correctly indicates the characteristics of a shock absorber, and has the advantage of containing physical causality. To evaluate the method, comparative evaluations of the linear model, the 5th polynomial model and Worden's model were carried out. The function presented in this paper is not only simple but also makes it possible to estimate the function coefficients easily and visually. In addition, it has the advantage of containing physical causality. Lastly, it effectively models the damping force of a shock absorber.
The shock absorber is a part having a direct influence on the ride comfort, stability and dynamic load prediction of a vehicle. Thus, a rationally modeled shock absorber should be required in the dynamic analysis of vehicles. This thesis presents a modified model, based on Worden's hyperbolic tangent function, in order to fit experimental data on the velocity-damping force of a shock absorber. The hyperbolic tangent function correctly indicates the characteristics of a shock absorber. and has the advantage of containing physical causality. To evaluate the method, comparative evaluations of the linear model. the 5th polynomial model and Worden's model were carried out. The function presented in this paper is not only simple but also makes it possible to estimate the function coefficients easily and visually. In addition, it has the advantage of containing physical causality. Lastly, it effectively models the damping force of a shock absorber.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.