• The Korean Journal of Ecology
• /
• 제6권4호
• /
• pp.237-242
• /
• 1983

This is an investigation on the secondary vegetation and succession in the mixed forests destroyed by the severe crown fires on April 8, 1982. The results are summarized as follows: The floristic compositions in the investigated area are composed of 63 kinds of kinds of vascular plants. The biological type shows $ H-D_1, 4-R_5-e$, which is supposed to make a progress to the $ H-D_1-R_5-e$ type. Dominant species are Spodiopogon sibiricus (100.00)-Carex humilis var. nana (70.52)-Miscanthus sinensis var. purpurascens (61, 06)-Lespedeza maximowiczii (57.53). Lespedexa maximowiczii is prevailing as the dominant species in this area. The species diversity(H) and eveness index(e) show 3.00 and 0.74 respectively, so that the species are various and shows uniform distribution comparatively in these communities. Degree of succession(DS) is 479 in the investigated area, the value of which is comparatively higher than that of Chungcheongbuk-do area at the second year afer fires. After the crown and trunk of trees were scorched by the crown fires, the pine tree (Pinus densiflora) died and the other species could be survivd after sometimes. It some that Quercus serrata. Q. dentata, Maackia amurensis, Lespedez cyrtobotrya, Platycarya strobilacea and Lindera glauca are the fire-resistant plants.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.18-23
• /
• 2009

After the installation of electric cables at block, PE(pre-erection) and hull stages, the coating stains on the electric cable sheath were unavoidably occurred by additional painting process. According to class rules paint or coating applied on the electric cables shall not adversely affect the mechanical, chemical of fire resistant characteristics of the electric cable sheath. However, there has not been quantitatively studied about the effect of coating stains on properties of sheath materials. In this study, we tried to investigate the effect of coating stains on the performance and deterioration of sheath materials by using FTIR, SEM analysis, flame retardant, high potential voltage and tensile test. The results sowed that coating stains, which were occurred during painting work on site could not adversely affect on the performance and deterioration of sheath materials.

• 한국재료학회지
• /
• 제26권10호
• /
• pp.521-527
• /
• 2016

Geopolymers have many advantages over Portland cement, including energy efficiency, reduced greenhouse gas emissions, high strength at early age and improved thermal resistance. Alkali activated geopolymers made from waste materials such as fly ash or blast furnace slag are particularly advantageous because of their environmental sustainability and low cost. However, their durability and functionality remain subjects for further study. Geopolymer materials can be used in various applications such as fire and heat resistant fiber composites, sealants, concretes, ceramics, etc., depending on the chemical composition of the source materials and the activators. In this study, we investigated the thermal properties and microstructure of fly ash and blast furnace slag based geopolymers in order to develop eco-friendly construction materials with excellent energy efficiency, sound insulation properties and good heat resistance. With different curing times, specimens of various compositions were investigated in terms of compressive strength, X-ray diffraction, thermal property and microstructure. In addition, we investigated changes in X-ray diffraction and microstructure for geopolymers exposed to $1,000^{\circ}C$ heat.

• 한국재난정보학회 논문집
• /
• 제12권4호
• /
• pp.373-380
• /
• 2016

본 연구에서는 기존 구조물의 방호 방폭에 대한 보강 방법으로서 프리캐스트 패널의 단층구성 재료에 경량성, 고강도, 내화성능 등을 향상시켜 단층 각각의 개별적인 특수성능과 복합적인 패널 구성물로서 방호 방폭 성능을 극대화 할 수 있는 복합섬유 패널을 제작하기 위해, 아라미드섬유(Aramid Fiber, 이하 AF)와 폴리에스터섬유(Polyester Fiber, 이하 PF)로 혼합된 내피와 외피의 기초물성을 평가하였다. 또한, 내화성능이 우수하고 경량인 Nano size의 복합소재를 이용한 충전재의 압축강도, 휨강도, 인장강도를 평가하여 복합섬유패널의 성능에 대한 기초 연구를 수행하였다.

• 한국전자파학회논문지
• /
• 제29권4호
• /
• pp.241-246
• /
• 2018

본 연구에서는 그라운드를 전환하여 주파수를 가변할 수 있는 광대역 메타물질 흡수체를 제안하였다. 그라운드 전환을 위해 두 개의 FR4 기판 구조를 제안하였으며, 중간 기판의 다이오드 ON/OFF에 따라 입사되는 신호의 반사, 투과를 조절하여 기판 두께에 따른 주파수 가변 구조를 제안하였다. 이를 증명하기 위해 시뮬레이션과 측정을 통해 중간층이 ON 상태일 경우, 3.5~11 GHz에서 90 % 이상의 흡수율을 가졌고, 중간층이 OFF 상태일 경우, 1.7~5.2 GHz에서 90 % 이상의 흡수율을 가졌다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.364.2-364.2
• /
• 2014

Magnesium oxide (MgO) thin films have attracted great scientific and technological interest in recent decades. Because of its distinguished properties such as a wide band gap (7.2 eV), a low dielectric constant (9.8), a low refractive index, an excellent chemical, and thermal stability (melting point=$2900^{\circ}C$), it is widely used as inorganic material in diverse areas such as fire resistant construction materials, optical materials, protective layers in plasma display panels, buffer layers of multilayer electronic/photonic devices, and perovskite ferroelectric thin films. Precursor used in the ALD requires volatility, stability, and low deposition temperature. Precursors using a heteroleptic ligands with different reactivity have advantage of selective reaction of the heteroleptic ligands on substrate during ALD process. In this study, we have synethesized new heteroleptic magnesium precursors ${\beta}$-diketonate and aminoalkoxide which have been widely used for the development of precursor because of the excellent volatility, chelating effects by increasing the coordination number of the metal, and advantages to synthesize a single precursor. A newly-synthesized Mg(II) precursor was adopted for growing MgO thin films using ALD.

• 한국통신학회논문지
• /
• 제35권4B호
• /
• pp.637-646
• /
• 2010

본 논문에서는 40 인치 까지의 FR-4 백플레인 트레이스를 통해 40 Gb/s 데이터 전송을 위해서 10 Gb/s 4 래 인으 로 구성되는 백플레인 채널 모델을 설계하였다. 시뮬레이션 결과에서 10 Gb/s 데이터 속도에서 IEEE P 802.3ba 표준에서 규정하는 요구사항보다 더 나은 백플레인 채널 특성을 확인하였다. 본 논문에서 제시한 유형의 전송채널에 대한 연구를 수행하여야 40 Gb/s 백플레인 이더넷 수신 적응 등화기 등의 설계가 가능할 것이다.

• KIEAE Journal
• /
• 제7권6호
• /
• pp.113-118
• /
• 2007

The composite beam adopted in the study was designed to reduce the floor height as well as to embed the top flange of steel frame into the slab that will enable to avoid applying the fire-resistant coating and to unify the joint method with a steel frame-type. As the steel frame and bottom concrete of the beam is pre-fabricated at the factory it could reduce the overall schedule at the jobsite. Applying such composite beam system to the work is expected to provide the efficient and enhanced performance, given the current tendency of the building construction that tends to be getting higher, larger and dense. The study focused on combining the composite beam with various column systems in a bid to propose the details thereof. A desirable composite girder can be adopted depending on site conditions through the evaluation of various beam and jointing approaches. Among the column systems applied to the study are steel column, SRC column, RC-PC column and RC column. The ways of combining with the columns addressed in the study were categorized into the rigid joint, pin joint, steel frame joint and bracket type joint. Besides, the instruction for site fabrication of beam-column was added in an effort to help set up the site fabrication procedures.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.51-60
• /
• 2017

In this study to develop disaster response robot in complex disaster site, we present the design of hydraulic manipulators for armored robot systems. To this end, we performed voice of customer researches with firefighters and rescue personnel. We created and analyzed the mission scenario of firefighters and rescue personnel in complex disaster situations, and derived the required functions of the robot to successfully perform missions. A heavy-duty, heat resistant, dexterous hydraulic robot manipulators is designed to realize the required functions. The designed robot has been verified through simulations and analysis in terms of the working area of the robot, actuating torques, and temperature analysis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.47-48
• /
• 2023

Reinforced concrete structures are an integrated structure in which reinforcing bars are placed on the tensile side of the beam to compensate for concrete that is strong in compression but weak in tension, so that the concrete receives compressive force and the reinforcing bars receive tensile force. It is durable, fire-resistant, economical, and adapts to the shape and dimensions of the structure. It has been widely used for a long time because it can be made freely without restrictions. However, reinforced concrete structures have the disadvantage that cracks occur easily, so they are repaired using a cross-sectional construction method. During this process, problems such as the repair part falling off occurred, so in order to solve the problem, stress changes due to changes in the size of the repair part were examined. As a result, based on the elastic modulus ratio of 1.0, the stress tended to increase as the size of the repair part decreased when it was less than 1.0, and the opposite tendency was seen when it was more than 1.0. This is believed to be due to an increase in the area of the part with a large elastic modulus.